journal article·2024-04

Increasing strength and electrical conductivity of Cu-0.77%Cr-0.86%Hf alloy by rotary swaging and subsequent aging

N. Martynenko, O. Rybalchenko, P. Straumal, N. Tabachkova, E. Lukyanova, G. Rybalchenko, D. Prosvirnin, E. Beletsky, P. Prokofiev, V. Yusupov, S. Dobatkin, B. Straumal

Journal of Materials Science· Volume 59· Issue 14
Publisher page

Abstract

The effect of cold rotary swaging (RS) and subsequent aging on the structure, electrical conductivity, mechanical characteristics and fracture toughness of the Cu-0.77%Cr-0.86%Hf alloy was studied. RS leads to the formation of a microstructure elongated along the direction of deformation with grains width of 8.0 ± 0.2 μm. An ultrafine-grained structure with shear bands of 370 ± 10 nm in width and subgrains of 500 ± 13 nm in size is formed inside these elongated grains. The refinement of the microstructure after RS leads to an increase in ultimate tensile strength (UTS) from 300 ± 5 to 505 ± 12 MPa and a decrease in ductility from 54.0 ± 2.4 to 12.9 ± 0.3%. A subsequent aging of the alloy leads to the precipitation of fine particles of Cr and Cu5Hf phases. The precipitation of these particles leads to an additional increase in UTS of RS-treated alloy up to 558 ± 11 MPa and ductility up to 15.4 ± 2.4%. In this case, the decomposition of the supersaturated solid solution, which accompanies the particles precipitation, leads to an increase in the electrical conductivity of the deformed alloy up to 77.7 ± 1.6%IACS. The combination of RS and subsequent aging at a temperature of 450 °C for 4 h leads to an increase in the fatigue limit from 220 to 393 MPa. In addition, this treatment allows to increase the fracture toughness coefficient by 6 times.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Li R, Kang H, Chen Z, Fan G, Zou C, Wang W, Zhang S, Lu Y, Jie J, Cao Z, Li T, Wang T (2016) A promising structure for fabricating high strength and high electrical conductivity copper alloys. Sci Rep 6:20799. https://doi.org/10.1038/srep2079910.1038/srep20799 ↗
2. Xiong L, Liu K, Shuai J, Hou Z, Zhu L, Li W (2017) Toward high strength and high electrical conductivity in super-aligned carbon nanotubes reinforced copper. Adv Eng Mater 20:1700805. https://doi.org/10.1002/adem.20170080510.1002/adem.201700805 ↗
3. Zhilyaev AP, Shakhova I, Morozova A, Belyakov A, Kaibyshev R (2016) Grain refinement kinetics and strengthening mechanisms in Cu–0.3Cr–0.5Zr alloy subjected to intense plastic deformation. Mater Sci Eng A 654:131–142. https://doi.org/10.1016/j.msea.2015.12.03810.1016/j.msea.2015.12.038 ↗
4. Straumal BB, Kilmametov AR, Ivanisenko Y, Mazilkin AA, Kogtenkova OA, Kurmanaeva L, Korneva A, Zięba P, Baretzky B (2015) Phase transitions induced by severe plastic deformation: steady-state and equifinality. Int J Mater Res 106(7):657–664. https://doi.org/10.3139/146.11121510.3139/146.111215 ↗
5. Ma S, Zhang Q, Fan J, Fu L, Wen M, Liu M, Shan A (2023) Excellent combination of strength, conductivity and ductility realized in a dilute Cu–Cr–Zr alloy by coherent nanoprecipitates. Mater Sci Eng A 885:145614. https://doi.org/10.1016/j.msea.2023.14561410.1016/j.msea.2023.145614 ↗
6. Kuang G, Miao K, Li X, Wu H, Liu C, Li R, Fan G (2023) In-situ observation of microstructure and orientation evolution of the Cu–Cr–Zr–Hf alloys. Mater Sci Eng A 865:144642. https://doi.org/10.1016/j.msea.2023.14464210.1016/j.msea.2023.144642 ↗
7. Ma B, An B, Zhao X, Li Y, Du J, Wang E (2023) Microstructure and properties of Cu–Cr–Zr alloy by doping Sc. Mater Lett 336:133917. https://doi.org/10.1016/j.matlet.2023.13391710.1016/j.matlet.2023.133917 ↗
8. Rybalchenko OV, Bochvar NR, Rybalchenko GV, Martynenko NS, Tabachkova NYu, Dobatkin SV (2023) Comparative analysis of the aging kinetics in low-alloyed Cu–Cr–Hf and Cu–Cr–Zr alloys after high pressure torsion. J Alloys Compd 955:170246. https://doi.org/10.1016/j.jallcom.2023.17024610.1016/j.jallcom.2023.170246 ↗
9. Yang Y, Kuang G, Li R (2022) Optimizing the electrical and mechanical properties of Cu–Cr alloys by Hf microalloying. Metals 12:485. https://doi.org/10.3390/met1203048510.3390/met12030485 ↗
10. Jiang Y, Zhang X, Cai P, Li P, Cao F, Gao F, Liang S (2023) Precipitation behavior and microstructural evolution during thermo-mechanical processing of precipitation hardened Cu–Hf based alloys. Acta Mater 245:118659. https://doi.org/10.1016/j.actamat.2022.11865910.1016/j.actamat.2022.118659 ↗
11. Subramanian PR, Laughlin DE (1988) The Cu–Hf (copper–hafnium) system. Bull Alloy Phase Diagr 9:51–56. https://doi.org/10.1007/BF0287746010.1007/BF02877460 ↗
12. Li R, Zhang S, Zou C, Kang H, Wang T (2019) The roles of Hf element in optimizing strength, ductility and electrical conductivity of copper alloys. Mater Sci Eng A 758:130–138. https://doi.org/10.1016/j.msea.2019.04.11010.1016/j.msea.2019.04.110 ↗
13. Humphreys FJ, Hatherly M (2003) Recrystallization and related annealing phenomena, 2nd edn. Elsevier Science & Technology, Elsevier Science Ltd, Kidlington
14. Li M, Zhang L, Zhu M, Wang H, Wei H (2018) Physical properties and precipitate microstructures of Cu–Hf alloys at different processing stages. Scanning 2018:3653987. https://doi.org/10.1155/2018/365398710.1155/2018/3653987 ↗
15. Bochvar NR, Rybalchenko OV, Shangina DV, Dobatkin SV (2019) Effect of equal-channel angular pressing on the precipitation kinetics in Cu–Cr–Hf alloys. Mater Sci Eng A 757:84–87. https://doi.org/10.1016/j.msea.2019.04.07310.1016/j.msea.2019.04.073 ↗
16. Shirshova P, Stolbovsky A (2022) Optimization of the composition based on thermodynamic modeling of low-alloyed Cu-Cr-Hf bronzes. In: AIP conference proceedings, vol 2456, p 02004710.1063/5.0074831 ↗
17. Shi B, Hong D, Wang W, Su L, Wang C, Xiao L, Ma T, Zhou J (2023) A novel precipitation-strengthened conductive copper alloy: Cu–Hf–Si alloy. Adv Eng Mater 25:2300944. https://doi.org/10.1002/adem.20230094410.1002/adem.202300944 ↗
18. Fu Z, Gao B, Li X, Li C, Pan H, Niu H, Zhu Y, Zhou H, Zhu X, Wu H, Liu C (2023) Improved strength-ductility combination of pure Zr by multi-scale heterostructured effects via rotary swaging and annealing. Mater Sci Eng A 864:144584. https://doi.org/10.1016/j.msea.2023.14458410.1016/j.msea.2023.144584 ↗
19. Naydenkin EV, Mishin IP, Zabudchenko OV, Lykova ON, Manisheva AI (2023) Structural-phase state and mechanical properties of β titanium alloy produced by rotary swaging with subsequent aging. J Alloys Compd 935(1):167973. https://doi.org/10.1016/j.jallcom.2022.16797310.1016/j.jallcom.2022.167973 ↗
20. Martynenko N, Anisimova N, Kiselevskiy M, Tabachkova N, Temralieva D, Prosvirnin D, Terentiev V, Koltygin A, Belov V, Morosov M, Yusupov V, Dobatkin S, Estrin Y (2020) Structure, mechanical characteristics, biodegradation, and in vitro cytotoxicity of magnesium alloy ZX11 processed by rotary swaging. J Magnes Alloys 8(4):1038–1046. https://doi.org/10.1016/j.jma.2020.08.00810.1016/j.jma.2020.08.008 ↗
21. Mao Q, Wang L, Nie J, Zhao Y (2022) Enhancing strength and electrical conductivity of Cu–Cr composite wire by two-stage rotary swaging and aging treatments. Compos B Eng 231:109567. https://doi.org/10.1016/j.compositesb.2021.10956710.1016/j.compositesb.2021.109567 ↗
22. Huang AH, Wang YF, Wang MS, Song LY, Li YS, Gao L, Huang CX (2019) Optimizing the strength, ductility and electrical conductivity of a Cu–Cr–Zr alloy by rotary swaging and aging treatment. Mater Sci Eng A 746:211–216. https://doi.org/10.1016/j.msea.2019.01.00210.1016/j.msea.2019.01.002 ↗
23. Martynenko N, Rybalchenko O, Bodyakova A, Prosvirnin D, Rybalchenko G, Morozov M, Yusupov V, Dobatkin S (2023) Effect of rotary swaging on the structure, mechanical characteristics and aging behavior of Cu-0.5%Cr-0.08%Zr alloy. Materials 16:105. https://doi.org/10.3390/ma1601010510.3390/ma16010105 ↗
24. Kunčická L, Kocich R (2018) Deformation behaviour of Cu-Al clad composites produced by rotary swaging. In: IOP conference series: materials science and engineering, vol 369, p 01202910.1088/1757-899X/369/1/012029 ↗
25. Kocich R, Kunčická L, Král P, Strunz P (2018) Characterization of innovative rotary swaged Cu–Al clad composite wire conductors. Mater Des 160:828–835. https://doi.org/10.1016/j.matdes.2018.10.02710.1016/j.matdes.2018.10.027 ↗
26. Martynenko NS, Bochvar NR, Rybalchenko OV, Prosvirnin DV, Rybalchenko GV, Kolmakov AG, Morozov MM, Yusupov VS, Dobatkin SV (2023) Increase in the strength and electrical conductivity of a Cu–0.8Hf alloy after rotary swaging and subsequent aging. Russ Metall (Metally) 2023(4):466–474. https://doi.org/10.1134/S003602952304015810.1134/S0036029523040158 ↗
27. Otto F, Frenzel J, Eggeler G (2011) On the influence of small quantities of Bi and Sb on the evolution of microstructure during swaging and heat treatments in copper. J Alloys Compd 509(10):4073–4080. https://doi.org/10.1016/j.jallcom.2010.12.17810.1016/j.jallcom.2010.12.178 ↗
28. Mao Q, Zhang Y, Guo Y, Zhao Y (2021) Enhanced electrical conductivity and mechanical properties in thermally stable fine-grained copper wire. Commun Mater 2:46. https://doi.org/10.1038/s43246-021-00150-110.1038/s43246-021-00150-1 ↗
29. Estrin Y, Martynenko N, Lukyanova E, Serebryany V, Gorshenkov M, Morozov M, Yusupov V, Dobatkin S (2020) Effect of rotary swaging on microstructure, texture, and mechanical properties of a Mg–Al–Zn alloy. Adv Eng Mater 22(1):1900506. https://doi.org/10.1002/adem.20190050610.1002/adem.201900506 ↗
30. Chu ZQ, Wei KX, Wei W, Alexandrov IV, An XL, Wang DD, Liu XK (2023) Simultaneously enhancing mechanical properties and electrical conductivity of Cu-0.5%Cr alloy as 5G connector material. J Alloys Compd 948:169750. https://doi.org/10.1016/j.jallcom.2023.16975010.1016/j.jallcom.2023.169750 ↗
31. Cho C-H, Cho H (2021) Effect of dislocation characteristics on electrical conductivity and mechanical properties of AA 6201 wires. Mater Sci Eng A 809:140811. https://doi.org/10.1016/j.msea.2021.14081110.1016/j.msea.2021.140811 ↗
32. Zhao L, Chen L, Luo B, Liang Y, Shi J, Zhang S, Lin Z, Shi P, Zheng T, Zhou B, Guo Y, Li Q, Liu C, Shen Z, Ding B, Zhong Y (2024) Low-dislocation-density ultrafine lamellar structure buffering triples ductility in Cu-8wt.%Sn alloy treated by rotary swaging and appropriate annealing. Mater Sci Eng A 889:145847. https://doi.org/10.1016/j.msea.2023.14584710.1016/j.msea.2023.145847 ↗