journal article·2024-02

Mechanical behavior of cavity and dislocation evolution induced by interfacial debonding of Cu/SiC composites

Yuhang Lu, Tinghong Gao, Wanjun Yan, Yue Gao, Quan Xie, Qingquan Xiao, Xinmao Qin

Journal of Materials Science· Volume 59· Issue 7
Publisher page

Abstract

Investigation of the dislocation and structural evolution associated with the study of the deformation behavior of composites is extremely vital among the scientific community. This study examines the mechanical behavior of idealized Cu/SiC composites using molecular dynamics simulations. The mechanical properties were tested by stretching the composites at different SiC particle radii and strain rates to examine the evolution of microstructure and dislocations during tensile fracture, the interfacial debonding between Cu and SiC, and the growth of nucleated voids. Our results demonstrate that an increase in strain rate elevates the yield strength of the composites but does not affect the Young’s modulus of the material. At high strain rates, the structural transformation of the material is more drastic. An increase in SiC particle radius leads to a decrease in overall mechanical properties, a decrease in the number and length of dislocations, and the formation of a dislocation loop resulting from dislocation interactions in the dislocation network. This study reported that interfacial debonding between Cu and SiC and dislocation networks promotes the growth of nucleated voids, with small SiC radii composites being more prone to deformation and fracture. These results provide a reference for understanding the mechanical behavior, dislocation studies, and interfacial debonding in Cu/SiC composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Feng L, Li W, Hahn EN, Branicio PS, Zhang X, Yao X (2022) Structural phase transition and amorphization in hexagonal SiC subjected to dynamic loading. Mech Mater 164:10413910.1016/j.mechmat.2021.104139 ↗
2. H Jin, L Qin, L Zhang, X Zeng, R Yang (2016) Review of wide band-gap semiconductors technology. In: MATEC web of conferences EDP sciences10.1051/matecconf/20164001006 ↗
3. Wang W, Liu W, Song Z (2021) Two-step chemical mechanical polishing of 4H-SiC (0001) wafer. ECS J Solid State Sci Technol 10:07400410.1149/2162-8777/ac12de ↗
4. Dandekar CR, Shin YC (2011) Molecular dynamics based cohesive zone law for describing Al–SiC interface mechanics. Compos A Appl Sci Manuf 42:35510.1016/j.compositesa.2010.12.005 ↗
5. Alabdullah M, Ghoniem NM (2020) A thermodynamics-based damage model for the non-linear mechanical behavior of SiC/SiC ceramic matrix composites in irradiation and thermal environments. Int J Damage Mech 29:156910.1177/1056789520941574 ↗
6. Mazo MA, Rubio J (2023) Novel silicon oxycarbide/spodumene glass-ceramic composites with tailored thermal expansion coefficient. J Non-Cryst Solids 604:12215510.1016/j.jnoncrysol.2023.122155 ↗
7. Patel J, Balasubramanian C, Sasmal C, Satyaprasad A (2018) Preparation of SiC nanowires and nanotubes by thermal arc plasma and study of parameters controlling its growth. Physica E 103:37710.1016/j.physe.2018.06.026 ↗
8. Ma R, Shi J, Lin W, Chen J (2020) Synthesis and sintering of nanocrystalline SiC ceramic powders. Mater Chem Phys 253:12344510.1016/j.matchemphys.2020.123445 ↗
9. Naslain R (2001) Ceramic matrix composites: matrices and processing. Encycl Mater Sci Technol. https://doi.org/10.1016/B0-08-043152-6/00196-010.1016/B0-08-043152-6/00196-0 ↗
10. Rajak DK, Pagar DD, Kumar R, Pruncu CI (2019) Recent progress of reinforcement materials: a comprehensive overview of composite materials. J Market Res 8:6354
11. Sun K, Zhang Z, Qian L, Dang F, Zhang X, Fan R (2016) Dual percolation behaviors of electrical and thermal conductivity in metal-ceramic composites. Appl Phys Lett 108:06190310.1063/1.4941758 ↗
12. Dolata AJ (2017) Tribological properties of AlSi12-Al2O3 interpenetrating composite layers in comparison with unreinforced matrix alloy. Materials 10:104510.3390/ma10091045 ↗
13. Bauer J, Sala-Casanovas M, Amiri M, Valdevit L (2022) Nanoarchitected metal/ceramic interpenetrating phase composites. Sci Adv 8:eabo308010.1126/sciadv.abo3080 ↗
14. Sun Y, Zhang H, Wang A, Fu H, Hu Z, Hodgson P (2010) Compressive deformation and damage of Mg-based metallic glass interpenetrating phase composite containing 30–70 vol% titanium. J Mater Res 25:219210.1557/jmr.2010.0272 ↗
15. Schukraft J, Horny D, Schulz K, Weidenmann KA (2022) 3D modeling and experimental investigation on the damage behavior of an interpenetrating metal ceramic composite (IMCC) under compression. Mater Sci Eng A 844:14314710.1016/j.msea.2022.143147 ↗
16. Schukraft J, Roßdeutscher J, Siegmund F, Weidenmann KA (2022) Thermal expansion behavior and elevated temperature elastic properties of an interpenetrating metal/ceramic composite. Thermochim Acta 715:17929810.1016/j.tca.2022.179298 ↗
17. Bychkov A, Nechyporenko O (2018) Composite metal-ceramic and metal-polymeric materials for friction assemblies of national civil aircrafts. Aerosp Res Bulg 30:14310.3897/arb.v30.e12 ↗
18. Chawla N, Singh D, Shen Y-L, Tang G, Chawla K (2008) Indentation mechanics and fracture behavior of metal/ceramic nanolaminate composites. J Mater Sci 43:4383https://doi.org/10.1007/s10853-008-2450-310.1007/s10853-008-2450-3 ↗
19. Sun B, Fan BB, Wang CY et al (2014) Effect of amorphous phase on mechanical properties of SiC/Cu composites. Key Eng Mater 602:586–58910.4028/www.scientific.net/KEM.602-603.586 ↗
20. Barmouz M, Asadi P, Givi MB, Taherishargh M (2011) Investigation of mechanical properties of Cu/SiC composite fabricated by FSP: effect of SiC particles’ size and volume fraction. Mater Sci Eng, A 528:174010.1016/j.msea.2010.11.006 ↗
21. Akbarpour M, Mirabad HM, Alipour S (2019) Microstructural and mechanical characteristics of hybrid SiC/Cu composites with nano-and micro-sized SiC particles. Ceram Int 45:327610.1016/j.ceramint.2018.10.235 ↗
22. Bazarnik P, Nosewicz S, Romelczyk-Baishya B et al (2019) Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite. Mater Sci Eng, A 766:13835010.1016/j.msea.2019.138350 ↗
23. Wu W-P, Peng Z, Şopu D, Eckert J (2022) Molecular dynamics study of fracture and plastic deformation of Cu/Cu64Zr36 crystalline/amorphous composites with a pre-existing void. J Non-Cryst Solids 586:12155610.1016/j.jnoncrysol.2022.121556 ↗
24. Khademian N, Gholamipour R (2013) Study on microstructure and fracture behavior of tungsten wire reinforced Cu-based and Zr-based bulk metallic glass matrix composites. J Non-Cryst Solids 365:7510.1016/j.jnoncrysol.2012.12.030 ↗
25. Li J-W, Guo J-G, Zhou L-J (2023) Molecular dynamics studies on mechanical properties of graphene/nanotwinned aluminum matrix composites. Physica E 147:11559710.1016/j.physe.2022.115597 ↗
26. Hassan AM, Mayyas AT, Alrashdan A, Hayajneh MT (2008) Wear behavior of Al–Cu and Al–Cu/SiC components produced by powder metallurgy. J Mater Sci 43:5368. https://doi.org/10.1007/s10853-008-2760-510.1007/s10853-008-2760-5 ↗
27. Balmon J, Fouvry S, Villechaise P, Paturaud J, Tschofen J, Feraille J (2023) Influence of SiC particles orientation on fretting crack extension in an Al-SiC metal matrix composite. Eng Fract Mech 281:10909110.1016/j.engfracmech.2023.109091 ↗
28. Xie L, Sun T, He C et al (2020) Enhancement of toughness of SiC through compositing SiC–Al interpenetrating phase composites. Nanotechnology 31:13570610.1088/1361-6528/ab6468 ↗
29. Zhang J, Zhang X, Wang Q, Xiao B, Ma Z (2018) Simulation of anisotropic load transfer and stress distribution in SiCp/Al composites subjected to tensile loading. Mech Mater 122:9610.1016/j.mechmat.2018.04.011 ↗
30. Zhou Y, Hu M (2017) Mechanical behaviors of nanocrystalline Cu/SiC composites: an atomistic investigation. Comput Mater Sci 129:12910.1016/j.commatsci.2016.12.014 ↗
31. Wang Z, Wynblatt P (1998) Study of a reaction at the solid Cu/α-SiC interface. J Mater Sci 33:1177. https://doi.org/10.1023/A:100431740769010.1023/A:1004317407690 ↗
32. Akbarpour M (2021) Effects of mechanical milling time on densification, microstructural characteristics and hardness of Cu–SiC nanocomposites prepared by conventional sintering process. Mater Chem Phys 261:12420510.1016/j.matchemphys.2020.124205 ↗
33. Yang Z, Lu Z (2013) Atomistic simulation of the mechanical behaviors of co-continuous Cu/SiC nanocomposites. Compos B Eng 44:45310.1016/j.compositesb.2012.04.010 ↗
34. Akbarpour M, Asl FG, Mirabad HM, Kim H (2022) Microstructural characterization and enhanced tensile and tribological properties of Cu–SiC nanocomposites developed by high-pressure torsion. J Market Res 20:4038
35. Efe GC, İpek M, Zeytin S, Bindal C (2012) An investigation of the effect of SiC particle size on Cu–SiC composites. Compos B Eng 43:181310.1016/j.compositesb.2012.01.006 ↗
36. Yang D, Sun Y, Yang Z, Chen X, Wang C (2021) Multiscale modeling of unidirectional composites with interfacial debonding using molecular dynamics and micromechanics. Compos B Eng 219:10889310.1016/j.compositesb.2021.108893 ↗
37. Wang H, Shin H (2022) Influence of nanoparticulate diameter on fracture toughness enhancement of polymer nanocomposites by an interfacial debonding mechanism: a multiscale study. Eng Fract Mech 261:10826110.1016/j.engfracmech.2022.108261 ↗
38. Meng Q, Wang Z (2015) Prediction of interfacial strength and failure mechanisms in particle-reinforced metal-matrix composites based on a micromechanical model. Eng Fract Mech 142:17010.1016/j.engfracmech.2015.06.001 ↗
39. Cui Y, Chen Z (2016) Void initiation from interfacial debonding of spherical silicon particles inside a silicon-copper nanocomposite: a molecular dynamics study. Modell Simul Mater Sci Eng 25:025007. https://doi.org/10.1088/1361-651X/aa51e510.1088/1361-651X/aa51e5 ↗
40. Leino AA, Samolyuk GD, Sachan R et al (2018) GeV ion irradiation of NiFe and NiCo: insights from MD simulations and experiments. Acta Mater 151:19110.1016/j.actamat.2018.03.058 ↗
41. Svobodova-Sedlackova A, Barreneche C, Alonso G, Fernandez AI, Gamallo P (2020) Effect of nanoparticles in molten salts–MD simulations and experimental study. Renewable Energy 152:20810.1016/j.renene.2020.01.046 ↗
42. Tipeev AO, Zanotto ED, Rino JP (2020) Crystal nucleation kinetics in supercooled germanium: MD simulations versus experimental data. J Phys Chem B 124:797910.1021/acs.jpcb.0c05480 ↗
43. Xiong Y, Hu W, Shu Y et al (2022) Atomistic simulation on the generation of defects in Cu/SiC composites during cooling. J Mater Sci Technol 123:110.1016/j.jmst.2021.10.058 ↗
44. Roos A, De Hosson JTM, Van der Giessen E (2001) A two-dimensional computational methodology for high-speed dislocations in high strain-rate deformation. Comput Mater Sci 20:1910.1016/S0927-0256(00)00118-X ↗
45. Deng H, Endo K, Yamamura K (2015) Competition between surface modification and abrasive polishing: a method of controlling the surface atomic structure of 4H-SiC (0001). Sci Rep 5:894710.1038/srep08947 ↗
46. Li J, Liu B, Fang Q, Huang Z, Liu Y (2017) Atomic-scale strengthening mechanism of dislocation-obstacle interaction in silicon carbide particle-reinforced copper matrix nanocomposites. Ceram Int 43:383910.1016/j.ceramint.2016.12.040 ↗
47. Mishin Y, Mehl M, Papaconstantopoulos D, Voter A, Kress J (2001) Structural stability and lattice defects in copper: Ab initio, tight-binding, and embedded-atom calculations. Phys Rev B 63:22410610.1103/PhysRevB.63.224106 ↗
48. Tersoff J (1994) Chemical order in amorphous silicon carbide. Phys Rev B 49:1634910.1103/PhysRevB.49.16349 ↗
49. Yang Z, Zhou Y, Wang T, Liu Q, Lu Z (2014) Crack propagation behaviors at Cu/SiC interface by molecular dynamics simulation. Comput Mater Sci 82:1710.1016/j.commatsci.2013.09.029 ↗
50. Clavier G, Desbiens N, Bourasseau E, Lachet V, Brusselle-Dupend N, Rousseau B (2017) Computation of elastic constants of solids using molecular simulation: comparison of constant volume and constant pressure ensemble methods. Mol Simul 43:141310.1080/08927022.2017.1313418 ↗
51. Gestoso P, Brisson J (2002) Simulation of orientation of uniaxially stretched poly (vinyl phenol) by molecular dynamics. J Polym Sci Part B Polym Phys 40:160110.1002/polb.10224 ↗
52. Murashima T, Urata S, Li S (2019) Coupling finite element method with large scale atomic/molecular massively parallel simulator (LAMMPS) for hierarchical multiscale simulations: Modeling and simulation of amorphous polymeric materials. Eur Phys J B 92:110.1140/epjb/e2019-100105-9 ↗
53. Stukowski A (2009) Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool. Modell Simul Mater Sci Eng 18:01501210.1088/0965-0393/18/1/015012 ↗
54. Stukowski A (2012) Structure identification methods for atomistic simulations of crystalline materials. Modell Simul Mater Sci Eng 20:04502110.1088/0965-0393/20/4/045021 ↗
55. Stukowski A, Albe K (2010) Extracting dislocations and non-dislocation crystal defects from atomistic simulation data. Modell Simul Mater Sci Eng 18:08500110.1088/0965-0393/18/8/085001 ↗
56. Małkowski P, Ostrowski Ł, Brodny J (2018) Analysis of Young’s modulus for Carboniferous sedimentary rocks and its relationship with uniaxial compressive strength using different methods of modulus determination. J Sustain Min 17:14510.1016/j.jsm.2018.07.002 ↗
57. Wang Y, Ma E, Valiev RZ, Zhu Y (2004) Tough nanostructured metals at cryogenic temperatures. Adv Mater 16:32810.1002/adma.200305679 ↗
58. Shen F, Münstermann S, Lian J (2022) unified fracture criterion considering stress state dependent transition of failure mechanisms in bcc steels at − 196 °C. Int J Plast 156:10336510.1016/j.ijplas.2022.103365 ↗
59. Maresca F, Curtin WA (2020) Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K. Acta Mater 182:23510.1016/j.actamat.2019.10.015 ↗
60. Kimura Y, Inoue T, Yin F, Tsuzaki K (2008) Inverse temperature dependence of toughness in an ultrafine grain-structure steel. Science 320:105710.1126/science.1156084 ↗
61. Joseph J, Stanford N, Hodgson P, Fabijanic DM (2017) Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys. J Alloy Compd 726:88510.1016/j.jallcom.2017.08.067 ↗
62. Jain M, Yaddanapudi K, Kidigannappa AT et al (2023) Simultaneous high strength and mechanical stability of bcc Nb/Mg nanolaminates. Acta Mater 242:11848710.1016/j.actamat.2022.118487 ↗
63. George EP, Curtin W, Tasan CC (2020) High entropy alloys: A focused review of mechanical properties and deformation mechanisms. Acta Mater 188:43510.1016/j.actamat.2019.12.015 ↗
64. Huo S, Xie L, Xiang J, Pang S, Hu F, Umer U (2018) Atomic-level study on mechanical properties and strengthening mechanisms of Al/SiC nano-composites. Appl Phys A 124:110.1007/s00339-018-1624-3 ↗
65. Fan H, Wang Q, El-Awady JA, Raabe D, Zaiser M (2021) Strain rate dependency of dislocation plasticity. Nat Commun 12:184510.1038/s41467-021-21939-1 ↗
66. Dupraz M, Sun Z, Brandl C, Van Swygenhoven H (2018) Dislocation interactions at reduced strain rates in atomistic simulations of nanocrystalline Al. Acta Mater 144:6810.1016/j.actamat.2017.10.043 ↗
67. Jin Z-H, Gumbsch P, Albe K et al (2008) Interactions between non-screw lattice dislocations and coherent twin boundaries in face-centered cubic metals. Acta Mater 56:112610.1016/j.actamat.2007.11.020 ↗
68. Lin Z, Pang W, Xin K, Feng X, Yin F (2021) The effect of loading strain rates on deformation behavior of Cu/Fe composite. Phys Lett A 388:12707010.1016/j.physleta.2020.127070 ↗
69. Jordan J, Deevi S (2003) Vacancy formation and effects in FeAl. Intermetallics 11:50710.1016/S0966-9795(03)00027-X ↗
70. Yang C, Pachaury Y, El-Azab A, Wharry J (2022) Molecular dynamics simulation of vacancy and void effects on strain-induced martensitic transformations in Fe-50 at.% Ni model concentrated solid solution alloy. Scripta Mater 209:11439410.1016/j.scriptamat.2021.114394 ↗
71. Cui Z, Fan X, Zhang G (2021) Molecular dynamic study for concentration-dependent volume relaxation of vacancy. Microelectron Reliab 120:11412710.1016/j.microrel.2021.114127 ↗
72. Doan D-Q, Fang T-H, Chen T-H, Bui T-X (2021) Effects of void and inclusion sizes on mechanical response and failure mechanism of AlCrCuFeNi2 high-entropy alloy. Eng Fract Mech 252:10784810.1016/j.engfracmech.2021.107848 ↗
73. Peng J, Xie B, Zeng X et al (2022) Vacancy dependent mechanical behaviors of high-entropy alloy. Int J Mech Sci 218:10706510.1016/j.ijmecsci.2022.107065 ↗
74. Li J, Dong L, Dong X et al (2021) Study on wear behavior of FeNiCrCoCu high entropy alloy coating on Cu substrate based on molecular dynamics. Appl Surf Sci 570:15123610.1016/j.apsusc.2021.151236 ↗
75. Sansoz F, Stevenson KD (2011) Relationship between hardness and dislocation processes in a nanocrystalline metal at the atomic scale. Phys Rev B 83:22410110.1103/PhysRevB.83.224101 ↗
76. Xu C, Zhang Y, Lin F, Wu G, Liu Q, Juul Jensen D (2016) Crystallographic analysis of nucleation at hardness indentations in high-purity aluminum. Metall Mater Trans A 47:586310.1007/s11661-016-3704-3 ↗
77. Pan H, He Y, Zhang X (2021) Interactions between dislocations and boundaries during deformation. Materials 14:101210.3390/ma14041012 ↗