journal article·2023-11

Nanoporous structure development in PEI thin film foams

Zainab S. Patel, Santhosh Sridhar, Krishna Nadella, Vipin Kumar, Alexander Nuhnen, Christoph Janiak

Journal of Materials Science· Volume 58· Issue 44
Publisher page

Abstract

Solid-state foaming has been extensively explored as an eco-friendly, highly tunable route to produce microcellular and nanocellular structures in a broad range of thermoplastic polymers, yet most of this work is done at the macro-scale, where the evolution of cellular morphology remains unaltered by material dimensions. In this study, via a combination of experiments and numerical modeling, we investigate nanostructure development in polyetherimide (PEI) thin films with thicknesses ranging between 25 and 500 µm. Solid-state foaming of saturated polymer films yielded distinct structures, exhibiting both open-cell and closed-cell hierarchical morphologies, with cell nucleation density remarkably spanning four orders of magnitude. All films demonstrated primary and secondary cell structures, except for the 25 µm film, where no structure developed. Foam surface area was characterized using surface porosimetry, and PEI thin films exhibited a broad range of porosities. Except for the 70 µm film, all films were porous, exhibiting surface areas as high as 57 m $$^2$$ /g for ultra-fine cell sizes of the order of $$sim$$ 70 nm. Modeling pre-foaming gas concentration profiles across the film thickness revealed gas concentration to be the primary driver of nanostructure development, demonstrating the high degree of structural tunability offered by the solid-state process, which is imperative to create advanced materials with enhanced properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Foaming and Composites · Polymer composites and self-healing · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Dingcai W, Fei X, Sun B, Ruowen F, He H, Matyjaszewski K (2012) Design and preparation of porous polymers. Chem Rev 112(7):3959–401510.1021/cr200440z ↗
2. Jiang J-X, Laybourn A, Clowes R, Khimyak YZ, Bacsa J, Higgins SJ, Adams DJ, Cooper AI (2010) High surface area contorted conjugated microporous polymers based on spiro-bipropylenedioxythiophene. Macromolecules 43(18):7577–758210.1021/ma101468r ↗
3. Ma X, Lai HWH, Wang Y, Alhazmi A, Xia Y, Pinnau I (2020) Facile synthesis and study of microporous catalytic arene-norbornene annulation-troger’s base ladder polymers for membrane air separation. ACS Macro Lett 9(5):680–68510.1021/acsmacrolett.0c00135 ↗
4. Martini-Vvedensky Jane E, Suh Nam P, Waldman, Francis A (1984) Microcellular closed cell foams and their method of manufacture, September 25. US Patent 4,473,665
5. Kumar V, Weller JE (1993) A process to produce microcellular pvc. Int Polym Proc 8(1):73–8010.3139/217.930073 ↗
6. Collias DI, Baird DG, Borggreve RJM (1994) Impact toughening of polycarbonate by microcellular foaming. Polymer 35(18):3978–398310.1016/0032-3861(94)90283-6 ↗
7. Kumar V, Weller JE (1994) A model for the unfoamed skin on microcellular foams. Polym Eng Sci 34(3):169–17310.1002/pen.760340302 ↗
8. Murray RE, Weller JE, Kumar V (2000) Solid-state microcellular acrylonitrile-butadiene-styrene foams. Cell Polym 19(6):413–425
9. Victoria Nawaby A, Paul Handa Y, Liao X, Yoshitaka Y, Tomohiro M (2007) Polymer-co2 systems exhibiting retrograde behavior and formation of nanofoams. Polym Int 56(1):67–7310.1002/pi.2112 ↗
10. Shimbo M, Higashitani I, Miyano Y (2007) Mechanism of strength improvement of foamed plastics having fine cell. J Cell Plast 43(2):157–16710.1177/0021955X06075585 ↗
11. Paul Handa Y, Wong B, Zhang Z, Kumar V, Eddy S, Khemani K (1999) Some thermodynamic and kinetic properties of the system petg-co2, and morphological characteristics of the co2-blown petg foams. Polym Eng Sci 39(1):55–6110.1002/pen.11396 ↗
12. KurnaW V, Juntunena P (2000) Impact strength of high relative density solid state carbon dioxide blown crystallizable poly (ethy1ene terephthalate) microcellular foams. Cell Polym 19(1):25
13. Kumar V, Gebizlioglu OS et al (1991) Carbon dioxide induced crystallization in pet foams. SPE Tech Pap 37:1297–1299
14. Wang X, Kumar V, Li W (2007) Low density sub-critical co2-blown solid-state pla foams. Cell Polym 26(1):11–3510.1177/026248930702600102 ↗
15. Park CB, Suh NP, Baldwin DF (1999) Method for providing continuous processing of microcellular and supermicrocellular foamed materials, February 2. US Patent 5,866,053
16. Paul Handa Y, Zhang Z (2000) A new technique for measuring retrograde vitrification in polymer-gas systems and for making ultramicrocellular foams from the retrograde phase. J Polym Sci, Part B: Polym Phys 38(5):716–72510.1002/(SICI)1099-0488(20000301)38:5<716::AID-POLB9>3.0.CO;2-N ↗
17. Hedrick JL, Carter KR, Cha HJ, Hawker CJ, DiPietro RA, Labadie JW, Miller RD, Russell TP, Sanchez MI, Volksen W et al (1996) High-temperature polyimide nanofoams for microelectronic applications. React Funct Polym 30(1–3):43–5310.1016/1381-5148(96)00020-X ↗
18. Bernd Krause G-H, Koops NFA, van der Vegt M, Wessling MW, van Turnhout J (2002) Ultralow-k dielectrics made by supercritical foaming of thin polymer films. Adv Mater 14(15):1041–104610.1002/1521-4095(20020805)14:15<1041::AID-ADMA1041>3.0.CO;2-A ↗
19. Bemed Krause HJP, Sijbesma PM, Van der Vegt NFA, Wessling M (2001) Bicontinuous nanoporous polymers by carbon dioxide foaming. Macromolecules 34(25):8792–880110.1021/ma010854j ↗
20. Miller D, Chatchaisucha P, Kumar V (2009) Microcellular and nanocellular solid-state polyetherimide (pei) foams using sub-critical carbon dioxide i. processing and structure. Polymer, 50(23):5576–558410.1016/j.polymer.2009.09.020 ↗
21. Miller D, Kumar V (2011) Microcellular and nanocellular solid-state polyetherimide (pei) foams using sub-critical carbon dioxide ii. tensile and impact properties. Polymer, 52(13):2910–291910.1016/j.polymer.2011.04.049 ↗
22. Guo H. (2015) Solid-state polymer nanofoams. Ph.D thesis
23. Guo H, Kumar V (2015) Some thermodynamic and kinetic low-temperature properties of the pc-co2 system and morphological characteristics of solid-state pc nanofoams produced with liquid co2. Polymer 56:46–5610.1016/j.polymer.2014.09.061 ↗
24. Wang G, Najafi F, Ho K, Hamidinejad M, Cui T, Walker GC, Singh CV, Filleter T (2022) Mechanical size effect of freestanding nanoconfined polymer films. Macromolecules 55(4):1248–125910.1021/acs.macromol.1c02270 ↗
25. Xia W, Keten S (2015) Size-dependent mechanical behavior of free-standing glassy polymer thin films. J Mater Res 30(1):36–4510.1557/jmr.2014.289 ↗
26. Feng T, He J, Rai A, Hun D, Liu J, Shrestha SS (2020) Size effects in the thermal conductivity of amorphous polymers. Phys Rev Appl 14(4):04402310.1103/PhysRevApplied.14.044023 ↗
27. Pfeiffenberger N, Milandou F, Niemeyer M, Sugawara T, Sanner M, Mahood J (2018) High temperature dielectric polyetherimide film development. IEEE Trans Dielectr Electr Insul 25(1):120–12610.1109/TDEI.2018.006806 ↗
28. Tan D, Zhang L, Chen Q, Irwin P (2014) High-temperature capacitor polymer films. J Electron Mater 43:4569–457510.1007/s11664-014-3440-7 ↗
29. ASTM Committee D-20 on Plastics (2008) Standard test methods for density and specific gravity (relative density) of plastics by displacement. ASTM international
30. Kumar V, Suh NP (1990) A process for making microcellular thermoplastic parts. Polym Eng Sci 30(20):1323–132910.1002/pen.760302010 ↗
31. Nicolae A (2018) Advanced methods to produce and characterize transport properties of novel nanoporous polymers. Ph.D thesis
32. Zhou C, Vaccaro N, Sundarram SS, Li W (2012) Fabrication and characterization of polyetherimide nanofoams using supercritical co2. J Cell Plast 48(3):239–25510.1177/0021955X12437984 ↗
33. Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60(2):309–31910.1021/ja01269a023 ↗
34. Bardestani R, Patience GS, Kaliaguine S (2019) Experimental methods in chemical engineering: specific surface area and pore size distribution measurements-bet, bjh, and dft. Can J Chem Eng 97(11):2781–279110.1002/cjce.23632 ↗
35. Nagendra B, Cozzolino A, Daniel C, Rizzo P, Guerra G (2022) High surface area nanoporous-crystalline polymer films. Macromolecules 55(7):2983–299010.1021/acs.macromol.2c00271 ↗
36. Gong P, Taniguchi T, Ohshima M (2014) Nanoporous structure of the cell walls of polycarbonate foams. J Mater Sci 49:2605–261710.1007/s10853-013-7959-4 ↗
37. Van Loock F, Bernardo V, Pérez MAR, Fleck NA (2019) The mechanics of solid-state nanofoaming. Proc R Soc A 475(2230):2019033910.1098/rspa.2019.0339 ↗