journal article·2023-07

Effect of vanadium element on the continuous precipitation behavior of Cu–3.2Ti–0.2Fe alloys

Weijiang Liu, Xinhe Gao, Xuehui Zhang, Longfei Zeng, Tahir Ahmad, Hang Wang, Bin Yang

Journal of Materials Science· Volume 58· Issue 26
Publisher page

Abstract

The effect of vanadium (V) element on the kinetics and mechanism of continuous precipitation in Cu–3.2Ti–0.2Fe alloys was elucidated using X-ray diffraction, high-resolution scanning transmission electron microscopy, calculation of precipitation activation energy and wavelength of spinodal decomposition. The results show the wavelength of spinodal decomposition decreased from 5.7 to 1.2 nm, and the corresponding activation energy increased from 41.7 to 119.5 J/mol with the addition of V element increased from 0 to 0.3 wt.%, performing severe inhibition on the continuous precipitation. Moreover, the hardness of the aged alloys was enhanced because of the refinement of V element on the precipitates, the Vickers hardness of the Cu–3.2Ti–0.2Fe–0.2 V alloy aged at 450 °C for 4 h was 38 HV0.2 higher than that of alloy without V addition. Whereas the striking contrast of the phase boundary between part precipitates and Cu-matrix in the close-packed (111) plane and coherent boundary was observed in the HR-TEM images of alloys with V addition, the precipitation mechanism of counterpart was formed not via spinodal decomposition but based on the nucleation and growth mechanism within higher precipitate activation energy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Wang X, Xiao Z, Meng XP, Yi YH, Chen L (2022) Microstructure and properties evolution of Cu–Ti–Cr–Mg alloy during equal channel angular pressing at room temperature and cryogenic temperature. J Alloys Compd 927:16694010.1016/j.jallcom.2022.166940 ↗
2. Huang L, Cui ZS, Meng XP, Zhang XW, Zhang X, Song X, Tang N, Xiao Z, Lei Q, Li Z (2021) Effects of microelements on the microstructure evolution and properties of ultrahigh strength Cu–Ti alloys. Mater Sci Eng A 823:14158110.1016/j.msea.2021.141581 ↗
3. Fu Y, Xie G, Zhao F, Wan J, Meng X, Liu X, Wang R, Liu X (2022) Precipitation behaviors and property variations of Cu-3.0 wt.% Ti fabricated by a novel short-processing non-vacuum heating-cooling combined mold continuous casting. J Alloys Compd 921:16605910.1016/j.jallcom.2022.166059 ↗
4. Semboshi S, Kaneno Y, Takasugi T, Masahashi N (2018) High strength and high electrical conductivity Cu–Ti alloy wires fabricated by aging and severe drawing. Metall Mater Trans A 49:4956–496510.1007/s11661-018-4816-8 ↗
5. Semboshi S, Kaneno Y, Takasugi T, Han SZ, Masahashi N (2019) Effect of composition on the strength and electrical conductivity of Cu–Ti binary alloy wires fabricated by aging and intense drawing. Metall Mater Trans A 50:1389–139610.1007/s11661-018-5088-z ↗
6. Abbas T, Ziya AB (1993) Evidence of short-range order in the disordered Cu–Ti alloys. J Mater Sci 28:5010–5013. https://doi.org/10.1007/BF0036117010.1007/BF00361170 ↗
7. Markandeya R, Nagarjuna S, Sarma DS (2004) Precipitation hardening of Cu–Ti–Cr alloys. Mater Sci Eng A 371:291–30510.1016/j.msea.2003.12.002 ↗
8. Semboshi S, Ishikuro M, Sato S, Wagatsuma K, Takasugi T (2013) Extraction of precipitates from age-hardenable Cu–Ti alloys. Mater Charact 82:23–3110.1016/j.matchar.2013.04.016 ↗
9. Wang X, Xiao Z, Qiu WT, Li Z, Liu F (2021) The evolution of microstructure and properties of a Cu–Ti–Cr–Mg–Si alloy with high strength during the multi-stage thermomechanical treatment. Mater Sci Eng A 803:14051010.1016/j.msea.2020.140510 ↗
10. Dutkiewicz J (1978) Spinodal decomposition, ordering, and discontinuous precipitation in deformed and aged copper-titanium alloys. Mater Sci Technol 5:333–340
11. Borchers C (1999) Catastrophic nucleation during decomposition of Cu-0.9 at.% Ti. Philos Mag A 79: 537–54710.1080/01418619908210315 ↗
12. Semboshi S, Hinamoto E, Iwase A (2014) Age-hardening behavior of a single-crystal CuTi alloy. Mater Lett 131:90–9310.1016/j.matlet.2014.05.128 ↗
13. Semboshi S, Sato M, Kaneno Y, Iwase A, Takasugi T (2017) Grain boundary character dependence on nucleation of discontinuous precipitates in Cu–Ti alloys. Materials 10:41510.3390/ma10040415 ↗
14. Semboshi S, Sato S, Ishikuro M, Wagatsuma K, Iwase A, Takasugi T (2014) Investigation of precipitation behavior in age-hardenable Cu–Ti alloys by an extraction-based approach. Metall Mater Trans A 45(8):3401–341110.1007/s11661-014-2293-2 ↗
15. Ramesh S, Nayaka HS, Anne G, Gopi K (2018) Influence of cold rolling process on microstructure and mechanical properties of Cu–1.5% Ti alloy, AIP Conference Proceedings, AIP Publishing, p 02005510.1063/1.5029631 ↗
16. Semboshi S, Kaneno Y, Takasugi T, Masahashi N (2020) Suppression of discontinuous precipitation in Cu–Ti alloys by aging in a hydrogen atmosphere. Metall Mater Trans A 51:3704–371210.1007/s11661-020-05801-5 ↗
17. Liu WJ, Li J, Chen X, Ji MH, Xiao XP, Wang H, Yang B (2021) Effect of vanadium on the microstructure and kinetics of discontinuous precipitation in Cu–3.2Ti–0.2Fe alloy. J Mater Res Technol 14:121–13610.1016/j.jmrt.2021.06.045 ↗
18. Semboshi S, Ikeda J, Iwase A, Takasugi T, Suzuki S (2015) Effect of boron doping on cellular discontinuous precipitation for age-hardenable Cu–Ti alloys. Materials 8:3467–347810.3390/ma8063467 ↗
19. Yamaguchi H, Yamasaki S (1990) Copper-iron-titanium precipitation hardenable dilute alloys for terminal and connector applications. Paper from Copper'90, Refining, Fabrication, Markets, in: Proceedings of the Conference held in Vaesteras; Sweden: 517–525
20. Rouxel B, Cayron C, Bornand J, Sanders P, Logé RE (2022) Micro-addition of Fe in highly alloyed Cu–Ti alloys to improve both formability and strength. Mater Des 213:11034010.1016/j.matdes.2021.110340 ↗
21. Laughlin DE, Cahn JW (1975) Spinodal decomposition in age hardening copper-titanium alloys. Acta Metall 23:329–33910.1016/0001-6160(75)90125-X ↗
22. Li S, Lv J, Xu K, Lou M, Hu X, Xiao X, Liu S, Chang K (2022) Manipulation of the spinodal decomposition behavior in a multicomponent system. Scripta Mater 219:11489310.1016/j.scriptamat.2022.114893 ↗
23. Smith JF, Carlson ON (1981) The Cu–V (Copper–Vanadium) system. 2(3): 348–35110.1007/BF02868290 ↗
24. Piotrowski ZGW (1980) Influence of vanadium on structure and kinetic transformations in Cu–Ti alloys. Metals Technology 7(1):502–50810.1179/030716980803286531 ↗
25. Wang LD, Chen CL, Kang MK, Wei YH (2000) On the daniel-lipson’s wavelength formula of spinodal decomposition. Scripta Mater 42:725–73010.1016/S1359-6462(99)00415-7 ↗
26. Semboshi S, Konno TJ (2008) Effect of aging in hydrogen atmosphere on electrical conductivity of Cu-3 at.%Ti alloy. Mater Res Soc 23:473–47710.1557/JMR.2008.0050 ↗
27. Semboshi S, Amano S, Fu J, Iwase A, Takasugi T (2017) Kinetics and equilibrium of age-induced precipitation in Cu-4 at. pct Ti binary alloy. Metall Mater Trans A 48A:1501–151110.1007/s11661-016-3949-x ↗
28. Cahn JW (1956) The kinetics of grain boundary nucleated reactions. Acta Metall 4:449–45910.1016/0001-6160(56)90041-4 ↗
29. Rouxel B, Cayron C, Bornand J et al (2022) Micro-addition of Fe in highly alloyed Cu–Ti alloys to improve both formability and strength. Mater Des 213:11034010.1016/j.matdes.2021.110340 ↗
30. Wang Y, Lu Y, Zhang S, Zhang H, Wang H, Chen Z (2021) Characterization and strengthening effects of different precipitates in Al-7Si-Mg alloy. J Alloys Compd 885:6102810.1016/j.jallcom.2021.161028 ↗
31. Liu W, Du ZW, Li T, Zhang K, Han XL, Peng YG, Zhang J, Yuan JW, Liu SF, Pang Z (2019) Precipitate evolution in Mg–7Gd–3Y–1Nd–1Zn–0.5Zr alloy during isothermal ageing at 240 °C. Trans Nonferrous Met Soc China 29:2047–205510.1016/S1003-6326(19)65111-3 ↗
32. Konno TJ, Nishio R, Semboshi S, Ohsuna T, Okunishi E (2008) Aging behavior of Cu–Ti–Al alloy observed by transmission electron microscopy. J Mater Sci 43:3761–3768. https://doi.org/10.1007/s10853-007-2233-210.1007/s10853-007-2233-2 ↗
33. Wang Y, Gao H, Han Y, Dai Y, Bian F, Wang J, Sun B (2014) First-principles study of solute-vacancy binding in Cu. J Alloys Compd 608:334–33710.1016/j.jallcom.2014.04.053 ↗
34. Rahm M, Hoffmann R, Ashcroft N (2016) Atomic and ionic radii of elements 1–96. Chem-A Eur J 22:14625–1463210.1002/chem.201602949 ↗