journal article·2023-06

When polymer precursor meets ultrasonic atomization-assisted-ice template: a new route to carbon anode for lithium-ion batteries

Bo Liang, Yanjun Li, Wei Tan, Menghao Chen, Jianghuai Hu, Yuechuan Wang, Ke Zeng, Gang Yang

Journal of Materials Science· Volume 58· Issue 24
Publisher page

Abstract

Herein, adenine-tailored polyimide is proposed as precursor to fabricate nitrogen-doped 3D carbon superstructure assembled by two-dimensional (2D) carbon nanosheets using ultrasonic atomization-assisted-ice template (UAIT) strategy. The structural evolution of adenine polyimide-derived carbon nanosheets (APCN) is strongly affected by pyrolysis temperature. The lithium-ion batteries assembled by APCN-600 electrode exhibits an impressive reversible capacity of 1046 mAh g−1 at 0.05 A g−1 and superior rate capability of 437 mAh g−1 at 5 A g−1. This work demonstrates the prospects of combining polymer precursor strategy and UAIT method to access high reversible specific capacity carbon-based anode for practical application. Two-dimensional (2D) carbon nanostructure with large specific surface areas and high conductivity can not only shorten the transport length for Li+ but also offer proper electrode–electrolyte interfaces for the ion transport reaction, leading to rate performance improvement and high cycle performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Winter M, Brodd RJ (2005) What are batteries, fuel cells, and supercapacitors. Chem Rev 105:4245–427010.1021/cr040110e ↗
2. Armand M, Tarascon JM (2008) Building better batteries: researchers must find a sustainable way of providing the power our modern lifestyles demand. Nature 451:652–65710.1038/451652a ↗
3. Tarascon JM, Armand M (2001) Issues and challenges facing rechargeable lithium batteries. Nature 414:359–36710.1038/35104644 ↗
4. Dunn B, Kamath H, Tarascon JM (2011) Electrical energy storage for the grid: a battery of choices. Science 334:928–93510.1126/science.1212741 ↗
5. Lei Z, Guo H, Rajagopalan R (2016) One-step synthesis of a silicon/hematite@carbon hybrid nanosheet/silicon sandwich-like composite as an anode material for Li-ion batteries. J Mater Chem A 4:4056–406110.1039/C5TA09123C ↗
6. Kim O, Park SM (2001) Mechanism of lithium intercalation into graphitic carbon layers studied by NMR experiments. J Electrochem Soc 148:194–19910.1149/1.1345870 ↗
7. Chang YC, Jong JH (2000) Kinetic characterization of the electrochemical intercalation of lithium-ions into graphite electrodes. J Electrochem Soc 147:2033–203810.1149/1.1393481 ↗
8. Qs A, Jz A, Su A, Xya B, Kt C, Bt C, Hqt D (2021) A review of recent developments in Si/C composite materials for Li-ion batteries. Energy Storage Mater 34:735–75410.1016/j.ensm.2020.10.026 ↗
9. Poizot P, Laruelle S, Dupont L, Tarascon JM (2000) Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries. Nature 407:496–49910.1038/35035045 ↗
10. Puthusseri D, Aravindan V, Anothumakkool B, Kurungot S, Madhavi S, Ogale S (2015) From waste paper basket to solid state and Li-HEC ultracapacitor electrodes: a value added journey for shredded office paper. Small 10:4395–440210.1002/smll.201401041 ↗
11. Le LA, Dan ZB, Jd A, Yg A, Jf A, Hong CA, Yz A, Mc C (2021) Carbon-based materials for fast charging lithium-ion batteries. Carbon 183:721–73410.1016/j.carbon.2021.07.053 ↗
12. Fan Z, Teng Z, Xi Y, Long Z, Kai L (2013) A high-performance supercapacitor-battery hybrid energy storage device based on graphene-enhanced electrode materials with ultrahigh energy density Energy Environ. Sci 6:1623–1632
13. Brian J, Matthew J, Ganter CD (2009) Carbon nanotubes for lithium ion batteries Energ. Environ Sci 2:638–654
14. Jin S, Xu H, Jia Y, Ji H, Du Z (2017) Nitrogen-doped hollow carbon nanospheres for high-performance li-ion batteries. Acs Appl Mater Inter 9:14180–1418610.1021/acsami.6b14840 ↗
15. Guo S, Chen Y, Shi L, Dong Y, Jing X (2018) Nitrogen-doped biomass-based ultra-thin carbon nanosheets with interconnected framework for High-Performance Lithium-Ion Batteries. Appl Surf Sci 437:136–14310.1016/j.apsusc.2017.12.144 ↗
16. Qie L, Chen W, Wang Z, Shao X, Li X, Hu X, Zhang W, Huang Y (2012) Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability. Adv Mater 24:2047–205010.1002/adma.201104634 ↗
17. Peng L, Fang Z, Yue Z (2017) Holey 2D nanomaterials for electrochemical energy storage. Adv Energy Mater 8:170217910.1002/aenm.201702179 ↗
18. He Y, Zhuang X, Lei C, Lei L, Hou Y, Mai Y, Feng X (2019) Porous carbon nanosheets: synthetic strategies and electrochemical energy related applications. Nano Today 24:103–11910.1016/j.nantod.2018.12.004 ↗
19. Kim JE, Oh JH, Kotal M, Koratkar N, Oh IK (2017) Self-assembly and morphological control of three-dimensional macroporous architectures built of two-dimensional materials. Nano Today 14:100–12310.1016/j.nantod.2017.04.008 ↗
20. Zhu S, Li J, Ma L, Gou L, Li Q, He C, Liu E, He F, Shi C, Zhao N (2016) Three-dimensional network of N-doped carbon ultrathin nanosheets with closely packed mesopores: controllable synthesis and application in electrochemical energy storage. Acs Appl Mater Interfaces 8:11720–1172810.1021/acsami.6b02386 ↗
21. Xu Z, Zhuang X, Yang C, Cao J, Yao Z, Tang Y, Jiang J, Wu D, Feng X (2016) Nitrogen-doped porous carbon superstructures derived from hierarchical assembly of polyimide. Nanosheets Adv Mater 28:1981–198710.1002/adma.201505131 ↗
22. Bouville F, Sylvain E, Bertrand M, Moortèle VD, Stevenson M (2014) Strong, tough and stiff bioinspired ceramics from brittle constituents. Nat Mater 13:508–51410.1038/nmat3915 ↗
23. Liang B, Chen L, Lv J, Li Y, Tan W, Zhu W, Hu J, Zeng K, Yang G (2022) Seaweed-like nitrogen-doped porous carbon superstructures via an ultrasonic atomization ice template as high-performance electrodes in supercapacitors. ACS Appl Energy Mater 5:6163–617310.1021/acsaem.2c00568 ↗
24. Lei S, Chen L, Zhou W, Deng P, Liu Y, Fei L, Lu W, Xiao Y, Cheng B (2018) Tetra-heteroatom self-doped carbon nanosheets derived from silkworm excrement for high-performance supercapacitors. J Power Sources 379:74–8310.1016/j.jpowsour.2018.01.032 ↗
25. Huo K, An W, Fu J, Gao B, Wang L, Peng X, Cheng GJ, Chu PK (2016) Mesoporous nitrogen-doped carbon hollow spheres as high-performance anodes for lithium-ion batteries. J Power Sources 324:233–23810.1016/j.jpowsour.2016.05.084 ↗
26. Dl A, Long CA, Lc A, Qs A, Min ZA, Yz D, Yang LB, Zhen LA, Ps A, Jla C (2019) Potassium gluconate-derived N/S Co-doped carbon nanosheets as superior electrode materials for supercapacitors and sodium-ion batteries. J Power Sources 414:308–31610.1016/j.jpowsour.2018.12.091 ↗
27. Pan D, Wang S, Zhao B, Wu M, Zhang H, Wang Y, Jiao Z (2009) Li Storage properties of disordered graphene nanosheets. Chem Mater 21:3136–314210.1021/cm900395k ↗
28. Nevidomskyy A, Csányi G, Payne M (2003) Chemically active substitutional nitrogen impurity in carbon nanotubes small. Phys Rev Lett 91:10550210.1103/PhysRevLett.91.105502 ↗
29. Yang SH, Shin WH, Kang JK (2007) The nature of graphite-and pyridinelike nitrogen configurations in carbon nitride nanotubes: dependence on diameter and helicity. Small 4:437–44110.1002/smll.200700543 ↗
30. Mu T, Zuo P, Lou S, Pan Q, Li Q, Du C, Gao Y, Cheng X, Ma Y, Yin G (2018) A two-dimensional nitrogen-rich carbon/silicon composite as high performance anode material for lithium ion batteries. Chem Eng J 341:37–4610.1016/j.cej.2018.02.026 ↗
31. Zhang F, Wang KX, Li GD, Chen JS (2009) Hierarchical porous carbon derived from rice straw for lithium ion batteries with high-rate performance. Electrochem Commun 11:130–13310.1016/j.elecom.2008.10.041 ↗
32. Lv W, Wen F, Xiang J, Zhao J, Li L, Wang L, Liu Z, Tian Y (2015) Peanut shell derived hard carbon as ultralong cycling anodes for lithium and sodium batteries. Electrochim Acta 176:533–54110.1016/j.electacta.2015.07.059 ↗
33. Zhi L, Zhan X, Xue T, Huan W, Chris M (2013) Mesoporous nitrogen-rich carbons derived from protein for ultra-high capacity battery anodes and supercapacitors. Energ Environ Sci 6:871–87810.1039/c2ee23599d ↗
34. Niu J, Shao R, Liang J, Dou M, Li Z, Huang Y, Wang F (2017) Biomass-derived mesopore-dominant porous carbons with large specific surface area and high defect density as high performance electrode materials for Li-ion batteries and supercapacitors. Nano Energy 36:322–33010.1016/j.nanoen.2017.04.042 ↗
35. Kato T, Yamada Y, Nishikawa Y, Ishikawa H, Sato S (2021) Carbonization mechanisms of polyimide: methodology to analyze carbon materials with nitrogen, oxygen, pentagons, and heptagons. Carbon 178:58–8010.1016/j.carbon.2021.02.090 ↗
36. Zhao F, Zhao X, Peng B, Gan F, Yao M, Tan W, Dong J, Zhang Q (2017) Polyimide-derived carbon nanofiber membranes as anodes for high-performance flexible lithium ion batteries. Chinese Chem Lett 29:1692–169710.1016/j.cclet.2017.12.015 ↗
37. Wu Q, Liu J, Yuan C, Li Q, Wang HG (2017) Nitrogen-doped 3D flower-like carbon materials derived from polyimide as high-performance anode materials for lithium-ion batteries. Appl Surf Sci 425:1082–108810.1016/j.apsusc.2017.07.118 ↗
38. Qing P, Zhou X, Jun F, Cao C (2019) adenine derivative host with interlaced 2D structure and dual lithiophilic-sulfiphilic sites to enable high-loading Li-S batteries. ACS Nano 13:9520–953210.1021/acsnano.9b04519 ↗
39. Hu J, Chen C, Yang F, He B, Lu Z, Li R, Yang G, Zeng K (2018) High performance polyimides containing bio-molecule adenine building block from DNA. Polymer 146:407–41910.1016/j.polymer.2018.05.006 ↗
40. Liu M, Chang L, Wang J, Li J, Wang L (2020) Hierarchical N-doped carbon nanosheets submicrospheres enable superior electrochemical properties for potassium ion capacitors. J Power Sources 469:22841510.1016/j.jpowsour.2020.228415 ↗
41. Zhang Y, Nie P, Xu C, Xu G, Ding B, Dou H, Zhang X (2018) High energy aqueous sodium-ion capacitor enabled by polyimide electrode and high-concentrated electrolyte. Electrochim Acta 5:512–51910.1016/j.electacta.2018.02.125 ↗
42. Song H, Yang G, Wang C (2014) General scalable strategy toward heterogeneously doped hierarchical porous graphitic carbon bubbles for lithium-ion battery anodes. Acs Appl Mater Interfaces 6:21661–2166810.1021/am506747z ↗
43. Zheng F, Yang Y, Chen Q (2014) High lithium anodic performance of highly nitrogen-doped porous carbon prepared from a metal-organic framework. Nat Commun 5:5621–563310.1038/ncomms6261 ↗
44. Ma C, Shao X, Cao D (2021) Nitrogen-doped graphene nanosheets as anode materials for lithium ion batteries: a first-principles study. J Mater Chem 22:8911–891510.1039/c2jm00166g ↗
45. Jiang J, Ping N, Bing D, Zhang YD, Zhang X (2017) Highly stable lithium ion capacitor enabled by hierarchical polyimide derived carbon microspheres combined with 3D current collectors. J Mater Chem A 5:23282–2329110.1039/C7TA05972H ↗
46. Jiang J, Yuan J, Nie P, Zhu Q, Chen C, He W, Zhang T, Dou H, Zhang X (2020) Hierarchical N-doped hollow carbon microspheres as advanced materials for high-performance lithium-ion capacitors. J Mater Chem, A 8:3956–396610.1039/C9TA08676E ↗
47. Xu H, Han C, Li W, Li H, Qiu X (2022) Quantification of lithium dendrite and solid electrolyte interphase (SEI) in lithium-ion batteries. J Power Sources 529:23121910.1016/j.jpowsour.2022.231219 ↗
48. Zhou Y, Yan Z, Xu D, Li P, Wang Y (2015) Nitrogen and sulfur dual-doped graphene sheets as anode materials with superior cycling stability for lithium-ion batteries. Electrochim Acta 184:24–3110.1016/j.electacta.2015.10.026 ↗
49. Yang Z, Mwa C, Hca C, Jie Z, Jie L, Zya C, Yan Z, Hza C, Yma C, Cla C (2021) Balance cathode-active and anode-active groups in one conjugated polymer towards high-performance all-organic lithium-ion batteries. Nano Energy 86:10605510.1016/j.nanoen.2021.106055 ↗