journal article·2022-01

Improved gypsum plaster by incorporation of zinc oxide nanoparticles (ZnO-NPs)

Guilherme Donizeti da Silva, Jacqueline Roberta Tamashiro, Bruna Letícia Martins, Geisiany Maria de Queiroz-Fernandes, Marcia Rodrigues de Morais Chaves, Regina Helena Pires, Angela Kinoshita

Journal of Materials Science· Volume 57· Issue 4
Publisher page

Abstract

Gypsum plaster is used in linings, coatings, decorative elements, and sealing and is a component of drywall. However, it is susceptible to the development of mold and other microorganisms, especially in hot and humid environments with poor ventilation and sunshine. In order to provide antimicrobial activity to the gypsum, zinc oxide nanoparticles (ZnO-NPs) were added to its matrix. Two types of ZnO-NPs were synthesized, by simple precipitation of sulfate heptahydrate (ZnSO4.7H2O) by sodium hydroxide (NaOH) and with the use of lauryl sulfate, resulting in nanoparticles with a diameter ~ 40 nm. The antimicrobial activity was assessed by the microdilution technique for determination of minimum inhibitory concentration against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Aspergillus niger. SEM images and the count of CFU present in the Staphylococcus aureus biofilm in the specimens composed of reference gypsum and with 15% ZnO-NPs of both syntheses show the efficacy of ZnO-NPs in the gypsum matrix against biofilm (p < 0.05). The specimens with ZnO-NPs also did not allow the proliferation of Aspergillus niger. Therefore, this new material, by preventing the proliferation of these microorganisms, will benefit the health of its users as well as the environment, due to the reduction in the use of chemicals to clean it. Consequently, bringing economic and environmental benefits.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Khatib JM (2016) Introduction. In: Sustainability of construction materials. Elsevier, pp 1–1110.1016/B978-0-08-100370-1.00001-9 ↗
2. Lewry AJ, Williamson J (1994) The setting of gypsum plaster—part I the hydration of calcium sulphate hemihydrate. J Mater Sci 29:5279–5284. https://doi.org/10.1007/BF0117153610.1007/BF01171536 ↗
3. da Silva GD, Guidelli EJ, de Queiroz-Fernandes GM et al (2019) Silver nanoparticles in building materials for environment protection against microorganisms. Int J Environ Sci Technol 16:1239–1248. https://doi.org/10.1007/s13762-018-1773-010.1007/s13762-018-1773-0 ↗
4. Loh K, Gaylarde CC, Shirakawa MA (2018) Photocatalytic activity of ZnO and TiO2 ‘nanoparticles’ for use in cement mixes. Constr Build Mater 167:853–859. https://doi.org/10.1016/j.conbuildmat.2018.02.10310.1016/j.conbuildmat.2018.02.103 ↗
5. Segers FJJ, van Laarhoven KA, Wösten HAB, Dijksterhuis J (2017) Growth of indoor fungi on gypsum. J Appl Microbiol 123:429–435. https://doi.org/10.1111/jam.1348710.1111/jam.13487 ↗
6. Jroundi F, Gonzalez-Muñoz MT, Garcia-Bueno A, Rodriguez-Navarro C (2014) Consolidation of archaeological gypsum plaster by bacterial biomineralization of calcium carbonate. Acta Biomater 10:3844–3854. Doi: https://doi.org/10.1016/j.actbio.2014.03.00710.1016/j.actbio.2014.03.007 ↗
7. Kazemian N, Pakpour S, Milani AS, Klironomos J (2019) Environmental factors influencing fungal growth on gypsum boards and their structural biodeterioration: a university campus case study. PLoS ONE 14:e0220556. https://doi.org/10.1371/journal.pone.022055610.1371/journal.pone.0220556 ↗
8. Vesper S, Wymer L, Cox D, Dewalt G (2016) Populations of some molds in water-damaged homes may differ if the home was constructed with gypsum drywall compared to plaster. Sci Total Environ 562:446–450. https://doi.org/10.1016/j.scitotenv.2016.04.06710.1016/j.scitotenv.2016.04.067 ↗
9. Ghosh S (2017) Interesting History of drywall pertaining to World War II
10. Baxi SN, Portnoy JM, Larenas-Linnemann D et al (2016) Exposure and health effects of fungi on humans. J Allergy Clin Immunol Pract 4:396–404. https://doi.org/10.1016/j.jaip.2016.01.00810.1016/j.jaip.2016.01.008 ↗
11. Lax S, Cardona C, Zhao D et al (2019) Microbial and metabolic succession on common building materials under high humidity conditions. Nat Commun 10:1–12. https://doi.org/10.1038/s41467-019-09764-z10.1038/s41467-019-09764-z ↗
12. Norhasri MSM, Hamidah MS, Fadzil AM (2017) Applications of using nano material in concrete: a review. Constr Build Mater 133:91–97. https://doi.org/10.1016/j.conbuildmat.2016.12.00510.1016/j.conbuildmat.2016.12.005 ↗
13. Sanchez F, Sobolev K (2010) Nanotechnology in concrete—a review. Constr Build Mater 24:2060–2071. https://doi.org/10.1016/j.conbuildmat.2010.03.01410.1016/j.conbuildmat.2010.03.014 ↗
14. Kumar M, Bansal M, Garg R (2020) An overview of beneficiary aspects of zinc oxide nanoparticles on performance of cement composites. Mater Today Proc 43:892–898. https://doi.org/10.1016/j.matpr.2020.07.21510.1016/j.matpr.2020.07.215 ↗
15. Altintas Yildirim O, Liu Y, Petford-Long AK (2015) Synthesis of uniformly distributed single- and double-sided zinc oxide (ZnO) nanocombs. J Cryst Growth 430:34–40. https://doi.org/10.1016/j.jcrysgro.2015.08.00710.1016/j.jcrysgro.2015.08.007 ↗
16. Kong XY, Ding Y, Yang R, Wang ZL (2004) Single-crystal nanorings formed by epitaxial self-coiling of polar nanobelts. Science (80- ) 303:1348–1351. Doi: https://doi.org/10.1126/science.109235610.1126/science.1092356 ↗
17. Rokhsat E, Akhavan O (2016) Improving the photocatalytic activity of graphene oxide/ZnO nanorod films by UV irradiation. Appl Surf Sci 371:590–595. https://doi.org/10.1016/j.apsusc.2016.02.22210.1016/j.apsusc.2016.02.222 ↗
18. Moezzi A, Cortie M, Dowd A, Mcdonagh A (2014). On the formation of nanocrystalline active zinc oxide from zinc hydroxide carbonate. https://doi.org/10.1007/s11051-014-2344-z10.1007/s11051-014-2344-z ↗
19. Sharma D, Rajput J, Kaith BS et al (2010) Synthesis of ZnO nanoparticles and study of their antibacterial and antifungal properties. Thin Solid Films 519:1224–1229. https://doi.org/10.1016/j.tsf.2010.08.07310.1016/j.tsf.2010.08.073 ↗
20. Ali J, Irshad R, Li B et al (2018) Synthesis and characterization of phytochemical fabricated zinc oxide nanoparticles with enhanced antibacterial and catalytic applications. J Photochem Photobiol B Biol 183:349–356. https://doi.org/10.1016/j.jphotobiol.2018.05.00610.1016/j.jphotobiol.2018.05.006 ↗
21. Mcguffie MJ, Hong J, Bahng JH et al (2016) Zinc oxide nanoparticle suspensions and layer-by-layer coatings inhibit staphylococcal growth. Nanomed Nanotechnol Biol Med 12:33–42. https://doi.org/10.1016/j.nano.2015.10.00210.1016/j.nano.2015.10.002 ↗
22. Janpetch N, Saito N, Rujiravanit R (2016) Fabrication of bacterial cellulose-ZnO composite via solution plasma process for antibacterial applications. Carbohydr Polym 148:335–344. https://doi.org/10.1016/j.carbpol.2016.04.06610.1016/j.carbpol.2016.04.066 ↗
23. Sharma D, Sharma S, Kaith BS et al (2011) Synthesis of ZnO nanoparticles using surfactant free in-air and microwave method. Appl Surf Sci 257:9661–9672. https://doi.org/10.1016/j.apsusc.2011.06.09410.1016/j.apsusc.2011.06.094 ↗
24. Weinstein MP, Patel JB, Burnham C-A, et al (2018) M07. Methods for dilution antimicrobial susceptibility tests for bacteria that grow aerobically. Clin Lab Stand Inst
25. Kaur P, Thakur R, Choudhary A (2012) An in vitro study of the antifungal activity of silver/chitosan nanoformulations against important seed borne pathogens. Int J Sci Technol Res 1:83–86
26. Zago CE, Silva S, Sanitá PV et al (2015) Dynamics of biofilm formation and the Interaction between Candida albicans and methicillin-susceptible (MSSA) and -resistant Staphylococcus aureus (MRSA). PLoS ONE 10:1–15. https://doi.org/10.1371/journal.pone.012320610.1371/journal.pone.0123206 ↗
27. Saginur R, StDenis M, Ferris W et al (2006) Multiple combination bactericidal testing of staphylococcal biofilms from implant-associated infections. Antimicrob Agents Chemother 50:55–61. https://doi.org/10.1128/AAC.50.1.55-61.200610.1128/AAC.50.1.55-61.2006 ↗
28. Iñiguez-Moreno M, Gutiérrez-Lomelí M, Guerrero-Medina PJ, Avila-Novoa MG (2018) Biofilm formation by Staphylococcus aureus and Salmonella spp. under mono and dual-species conditions and their sensitivity to cetrimonium bromide, peracetic acid and sodium hypochlorite. Brazilian J Microbiol 49:310–319. https://doi.org/10.1016/j.bjm.2017.08.00210.1016/j.bjm.2017.08.002 ↗
29. Cao D, Gong S, Shu X et al (2019) Preparation of ZnO nanoparticles with high dispersibility based on oriented attachment (OA) process. Nanoscale Res Lett 14:210. https://doi.org/10.1186/s11671-019-3038-310.1186/s11671-019-3038-3 ↗
30. Wu X, Bai H, Li C et al (2006) Controlled one-step fabrication of highly oriented ZnO nanoneedle/nanorods arrays at near room temperature. Chem Commun 15:1655. https://doi.org/10.1039/b516497d10.1039/b516497d ↗
31. Wen B, Huang Y, Boland JJ (2008) Controllable growth of ZnO nanostructures by a simple solvothermal process. J Phys Chem C 112:106–111. https://doi.org/10.1021/jp076789i10.1021/jp076789i ↗
32. Vogel EM (1987) Materials for display devices based on metallo-organic precursors. Adv Ceram 21:131
33. Lafuente B, Downs RT, Yang H, Stone N (2015) The power of databases: the RRUFF project. In: Armbruster T, Danisi R (eds) Highlights in mineralogical crystallography. De Gruyter, Berlin, Germany, pp 1–30
34. Chateigner D, Chen X, Ciriotti M, et al (2021) Crystallography open database. http://crystallography.net/cod/index.php. Accessed 11 Nov 2021
35. Gunalan S, Sivaraj R, Rajendran V (2013) Green synthesized ZnO nanoparticles against bacterial and fungal pathogens. Prog Nat Sci Mater Int 22:693–700. https://doi.org/10.1016/j.pnsc.2012.11.01510.1016/j.pnsc.2012.11.015 ↗
36. Rodríguez-Paéz JE, Caballero AC, Villegas M et al (2001) Controlled precipitation methods: formation mechanism of ZnO nanoparticles. J Eur Ceram Soc 21:925–930. https://doi.org/10.1016/S0955-2219(00)00283-110.1016/S0955-2219(00)00283-1 ↗
37. Shang Y, Liu H, Xia J, Xu Z (2005) Fabrication and characterization of flower-like ZnO by gemini surfactant-assisted hydrothermal process. J Dispers Sci Technol 26:525–530. https://doi.org/10.1081/DIS-20005762310.1081/DIS-200057623 ↗
38. Kumar R, Umar A, Kumar G (2016) Antimicrobial properties of ZnO nanomaterials: a review. Ceram Int 43:3940–3961. https://doi.org/10.1016/j.ceramint.2016.12.06210.1016/j.ceramint.2016.12.062 ↗
39. Ramimoghadam D, Hussein M, Taufiq-Yap Y (2012) The effect of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) on the properties of ZnO synthesized by hydrothermal method. Int J Mol Sci 13:13275–13293. https://doi.org/10.3390/ijms13101327510.3390/ijms131013275 ↗
40. Singh P, Nanda A (2015) Synthesis of highly dispersed zinc oxide nanoparticles through ultrasonication assisted by hydrothermal treatment: a novel approach. Synth React Inorganic Met Nano Metal Chem 45:1121–1131. https://doi.org/10.1080/15533174.2013.86267810.1080/15533174.2013.862678 ↗
41. Jayaseelan C, Rahuman AA, Kirthi AV et al (2012) Novel microbial route to synthesize ZnO nanoparticles using Aeromonas hydrophila and their activity against pathogenic bacteria and fungi. Spectrochim Acta Part A Mol Biomol Spectrosc 90:78–84. https://doi.org/10.1016/j.saa.2012.01.00610.1016/j.saa.2012.01.006 ↗
42. Reddy KM, Feris K, Bell J et al (2007) Selective toxicity of zinc oxide nanoparticles to prokaryotic and eukaryotic systems. Appl Phys Lett 90:10–13. https://doi.org/10.1063/1.274232410.1063/1.2742324 ↗
43. Talebian N, Amininezhad SM, Doudi M (2013) Controllable synthesis of ZnO nanoparticles and their morphology-dependent antibacterial and optical properties. J Photochem Photobiol B Biol 120:66–73. https://doi.org/10.1016/j.jphotobiol.2013.01.00410.1016/j.jphotobiol.2013.01.004 ↗
44. Raghupathi KR, Koodali RT, Manna AC (2011) Size-dependent bacterial growth inhibition and mechanism of antibacterial activity of zinc oxide nanoparticles. Langmuir 27:4020–4028. https://doi.org/10.1021/la104825u10.1021/la104825u ↗
45. Ann LC, Mahmud S, Bakhori SKM et al (2014) Antibacterial responses of zinc oxide structures against Staphylococcus aureus, Pseudomonas aeruginosa and Streptococcus pyogenes. Ceram Int 40:2993–3001. https://doi.org/10.1016/j.ceramint.2013.10.00810.1016/j.ceramint.2013.10.008 ↗
46. Siddiqi KS, ur Rahman A, Tajuddin, Husen A, (2018) Properties of zinc oxide nanoparticles and their activity against microbes. Nanoscale Res Lett 13:141. https://doi.org/10.1186/s11671-018-2532-310.1186/s11671-018-2532-3 ↗
47. Huang Z, Zheng X, Yan D et al (2008) Toxicological effect of ZnO nanoparticles based on bacteria. Langmuir 24:4140–4144. https://doi.org/10.1021/la703594910.1021/la7035949 ↗
48. Padmavathy N, Vijayaraghavan R (2008) Enhanced bioactivity of ZnO nanoparticles—an antimicrobial study. Sci Technol Adv Mater 9:035004. https://doi.org/10.1088/1468-6996/9/3/03500410.1088/1468-6996/9/3/035004 ↗
49. Wang X, Yang F, Yang W, Yang X (2007) A study on the antibacterial activity of one-dimensional ZnO nanowire arrays: Effects of the orientation and plane surface. Chem Commun 42:4419–4421. https://doi.org/10.1039/b708662h10.1039/b708662h ↗
50. Mehmood S, Rehman MA, Ismail H et al (2015) Significance of postgrowth processing of ZnO nanostructures on antibacterial activity against gram-positive and gram-negative bacteria. Int J Nanomedicine 10:4521–4533. https://doi.org/10.2147/IJN.S8335610.2147/IJN.S83356 ↗
51. Rajiv P, Rajeshwari S, Venckatesh R (2013) Bio-Fabrication of zinc oxide nanoparticles using leaf extract of Parthenium hysterophorus L. and its size-dependent antifungal activity against plant fungal pathogens. Spectrochim Acta - Part A Mol Biomol Spectrosc 112:384–387. https://doi.org/10.1016/j.saa.2013.04.07210.1016/j.saa.2013.04.072 ↗