journal article·2020-07

RETRACTED ARTICLE: Printed wearable lithium-ion electrodes with high electrochemical performance as portable batteries

Yang Cao

Journal of Materials Science· Volume 55· Issue 19
This record is marked as retracted by the source. Review the publisher’s notice before using its findings.
Publisher page

Abstract

Self-support flexible lithium-ion battery is one of crucial members of smart materials. In this work, a textile-structured battery was made by extrusion 3D printing technology, using a viscosity modifier (a high concentration of polyvinylidene fluoride), a conductive agent (carbon nanotube) and active electrode materials (i.e. lithium iron phosphate or lithium titanate). We prepared a printable ink (viscosity 105 Pa s), followed by rheological properties examinations. The ink shows significant shear thinning behavior, and storage modulus value reaches a high level (105 Pa). The excellent rheological properties are proved as beneficial to printing and solidification process. Additionally, electrochemical test results indicate printed electrodes exhibit stable and well-matched charge and discharge specific capacity, the successfully soft-packed lithium-ion battery displays a discharge specific capacity up to 108 mAh g−1. Even after bending, the discharge specific capacity is about 111 mAh g−1. Further experiments reveal outstanding electrochemical properties open up new possibility for smart wearable electronics applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Supercapacitor Materials and Fabrication · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Tehrani Z, Korochkina T, Govindarajan S, Thomas DJ, O’Mahony J, Kettle J et al (2015) Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications. Org Electron 26:386–39410.1016/j.orgel.2015.08.007 ↗
2. Liu QC, Liu T, Liu DP, Li ZJ, Zhang XB, Zhang Y (2016) A flexible and wearable lithium-oxygen battery with record energy density achieved by the interlaced architecture inspired by bamboo slips. Adv Mater 28:8413–841810.1002/adma.201602800 ↗
3. Graphical Abstract: Angew. Chem. Int. Ed. 13/2019. (2019). Angewandte Chemie International Edition, 58(13), 4074–408810.1002/anie.201981311 ↗
4. Zhu YH, Yuan S, Bao D, Yin YB, Zhong HX, Zhang XB et al (2017) Decorating waste cloth via industrial wastewater for tube-type flexible and wearable sodium-ion batteries. Adv Mater 29(16):160371910.1002/adma.201603719 ↗
5. Yang MZ, Wang H, Shuai WQ, Deng XJ (2019) Thermal optimization of a kirigami-patterned wearable lithium-ion battery based on a novel design of composite phase change material. Appl Therm Eng 161:114–141
6. Cheng H, Du Y, Wang B, Mao Z, Xu H, Zhang L et al (2017) Flexible cellulose-based thermoelectric sponge towards wearable pressure sensor and energy harvesting. Chem Eng J 338:1–710.1016/j.cej.2017.12.134 ↗
7. Kwak YH, Kim W, Park KB, Kim K, Seo S (2017) Flexible heartbeat sensor for wearable device. Biosens Bioelectron 94:250–25510.1016/j.bios.2017.03.016 ↗
8. Ha M, Lee S, Ko H (2018) Wearable and flexible sensors for user-interactive health-monitoring devices. J Mater Chem B. https://doi.org/10.1039/C8TB01063C10.1039/C8TB01063C ↗
9. Koo M, Park KI, Lee SH, Suh M, Jeon DY, Choi JW et al (2012) Bendable inorganic thin-film battery for fully flexible electronic systems. Nano Lett 12(9):4810–481610.1021/nl302254v ↗
10. Ren H, Yu R, Qi J, Zhang L, Jin Q, Wang D (2019) Hollow multishelled heterostructured anatase/TiO2 (B) with superior rate capability and cycling performance. Adv Mater 31:180575410.1002/adma.201805754 ↗
11. Kang C, Cha E, Baskaran R, Choi W (2016) Three-dimensional free-standing carbon nanotubes for a flexible lithium-ion battery anode. Nanotechnology 27(10):10540210.1088/0957-4484/27/10/105402 ↗
12. Wang Y, Chen C, Xie H, Gao T, Hu L (2017) 3D-printed all-fiber li-ion battery toward wearable energy storage. Adv Funct Mater 27:170314010.1002/adfm.201703140 ↗
13. Wang B, Shi T, Zhang Y, Chen C, Li Q, Fan Y (2018) Lignin-based highly sensitive flexible pressure sensor for wearable electronics. J Mater Chem C 6:6423–642810.1039/C8TC01348A ↗
14. Kwon YH, Woo SW, Jung HR, Yu HK, Kim K, Ohi BH et al (2012) Cable-type flexible lithium ion battery based on hollow multi-helix electrodes. Adv Mater 24(38):5192–519710.1002/adma.201202196 ↗
15. Fu K, Yildiz O, Bhanushali H, Wang Y, Stano K, Xue L et al (2013) Aligned carbon nanotube-silicon sheets: a novel nano-architecture for flexible lithium ion battery electrodes. Adv Mater 25(36):5109–511410.1002/adma.201301920 ↗
16. Yu H, Zhu C, Zhang K, Chen Y, Li C, Gao P et al (2014) Three-dimensional hierarchical mos2 nanoflake array/carbon cloth as high-performance flexible lithium-ion battery anodes. J Mater Chem A 2(13):455110.1039/C3TA14744D ↗
17. Yang C, Ji X, Fan X, Gao T, Suo L, Wang F et al (2017) Flexible aqueous li-ion battery with high energy and power densities. Adv Mater 29:170197210.1002/adma.201701972 ↗
18. Hu Y, Jin Y, Zhang W (2019) Crystalline, few-layer 2D materials via surfactant-monolayer-assisted interfacial synthesis. Chem Res Chin Univ 35:955–95610.1007/s40242-019-1014-1 ↗
19. Dubal DP, Chodankar NR, Kim DH, Gomez-Romero P (2018) Towards flexible solid-state supercapacitors for smart and wearable electronics. Chem Soc Rev 47(39):206510.1039/C7CS00505A ↗
20. Li L, Lou Z, Chen D, Jiang K, Han W, Shen G (2017) Recent advances in flexible/stretchable supercapacitors for wearable electronics. Small 14:170282910.1002/smll.201702829 ↗
21. Zhao X, Yu R, Tang H, Mao D, Qi J, Wang B, Wang D (2017) Formation of septuple-shelled (Co2/3Mn1/3)(Co5/6Mn1/6)2O4 hollow spheres as electrode material for alkaline rechargeable battery. Adv Mater 29(34):170055010.1002/adma.201700550 ↗
22. Li L, Bai Y, Li L, Wang S, Zhang T (2017) A superhydrophobic smart coating for flexible and wearable sensing electronics. Adv Mater 29:170251710.1002/adma.201702517 ↗
23. Wu Y, Qu J, Daoud WA, Wang L, Qi T (2019) Flexible composite-nanofiber based piezo-triboelectric nanogenerators for wearable electronics. J Mater Chem A 7:13347–1335510.1039/C9TA02345C ↗
24. Feng J-X, Xu H, Dong Y-T, Lu X-F, Tong Y-X, Li G-R (2017) Efficient hydrogen evolution electrocatalysis using cobalt nanotubes decorated with titanium dioxide nanodots. Angew Chem Int Ed 56(11):2960–296410.1002/anie.201611767 ↗
25. Xin Q, Meng S, Fengyu L, Yanlina S (2016) Research progress in flexible wearable electronic sensors. Acta Chim Sin 74:565–57510.6023/A16030156 ↗
26. Wang J, Wan J, Yang N et al (2020) Hollow multishell structures exercise temporal-spatial ordering and dynamic smart behaviour. Nat Rev Chem 4:159–16810.1038/s41570-020-0161-8 ↗
27. Li Q, Ardebili H (2016) Flexible thin-film battery based on solid-like ionic liquid-polymer electrolyte. J Power Sources 303:17–2110.1016/j.jpowsour.2015.10.099 ↗
28. Wang J, Wan J, Wang D (2019) Hollow multishelled structures for promising applications: understanding the structure-performance correlation. Acc Chem Res 52:2169–217810.1021/acs.accounts.9b00112 ↗