Mechanical and X-band electromagnetic properties of vitrified bonded SiC composite ceramics
Source abstract
Abstract
Vitrified bonded SiC composite ceramics were prepared using a simple powder blending, forming, and sintering process. The effect of SiC particle size on the mechanical and dielectric properties of vitrified bonded SiC composite ceramics was investigated. Vitrified bonds wet and coat SiC particles during sintering and form continuous bonding networks upon cooling. The vitrified bonds render the ceramics high flexural strength and act as impedance mismatching modification layer between SiC particles and air. With varying SiC particle size, the microstructure, and properties of the vitrified bonded SiC composite ceramics change accordingly and at 7 μm, it reaches optimal microstructure, a highest flexural strength of 67.85 MPa and highest reflection loss. However, the dielectric loss of composite ceramics decreases as the SiC particle size increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Electromagnetic wave absorption materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Han M, Yin X, Duan W et al (2016) Hierarchical graphene/SiC nanowire networks in polymer-derived ceramics with enhanced electromagnetic wave absorbing capability. J Eur Ceram Soc 36:2695–270310.1016/j.jeurceramsoc.2016.04.003 ↗
2. Ye F, Zhang L, Yin X et al (2013) Dielectric and EMW absorbing properties of PDCs-SiBCN annealed at different temperatures. J Eur Ceram Soc 33:1469–147710.1016/j.jeurceramsoc.2013.01.006 ↗
3. Liu X, Zhang Z, Wu Y (2011) Absorption properties of carbon black/silicon carbide microwave absorbers. Compos Part B Eng 42:326–32910.1016/j.compositesb.2010.11.009 ↗
4. Kumar A, Agarwala V, Singh D (2014) Effect of milling on dielectric and microwave absorption properties of SiC based composites. Ceram Int 40:1797–180610.1016/j.ceramint.2013.07.080 ↗
5. Li Z, Zhou W, Su X et al (2011) Effect of boron doping on microwave dielectric properties of SiC powder synthesized by combustion synthesis. J Alloys Compd 509:973–97610.1016/j.jallcom.2010.08.156 ↗
6. Zhang B, Li JB, Sun JJ et al (2002) Nanometer-sized silicon carbide powder synthesis and its dielectric behavior in the microwave range. J Eur Ceram Soc 22:93–9910.1016/S0955-2219(01)00248-5 ↗
7. Oh JH, Oh KS, Kim CG, Hong CS (2004) Design of radar absorbing structures using glass/epoxy composite containing carbon black in X-band frequency ranges. Compos Part B Eng 35:49–5610.1016/j.compositesb.2003.08.011 ↗
8. Huang Y, Cao Q, Li Z et al (2009) Effect of synthesis atmosphere on the microwave dielectric properties of ZnO powders. J Am Ceram Soc 92:2129–213110.1111/j.1551-2916.2009.03138.x ↗
9. Zhang H, Zhang J, Zhang H (2007) Electromagnetic properties of silicon carbide foams and their composites with silicon dioxide as matrix in X-band. Compos Part A Appl Sci Manuf 38:602–60810.1016/j.compositesa.2006.02.014 ↗
10. Wu R, Zhou K, Yang Z et al (2013) Molten-Salt-mediated synthesis of SiC nanowires for microwave absorption applications. Cryst Eng Comm 15:570–57610.1039/C2CE26510A ↗
11. Zhu HL, Bai YJ, Liu R et al (2011) In situ synthesis of one-dimensional MWCNT/SiC porous nanocomposites with excellent microwave absorption properties. J Mater Chem 21:13581–1358710.1039/c1jm11747e ↗
12. Zheng G, Yin X, Liu S et al (2013) Improved electromagnetic absorbing properties of Si3N4–SiC/SiO2 composite ceramics with multi-shell microstructure. J Eur Ceram Soc 33:2173–218010.1016/j.jeurceramsoc.2013.03.021 ↗
13. Duan W, Yin X, Li Q et al (2014) Synthesis and microwave absorption properties of SiC nanowires reinforced SiOC ceramic. J Eur Ceram Soc 34:257–26610.1016/j.jeurceramsoc.2013.08.029 ↗
14. Li X, Zhang L, Yin X (2012) Synthesis, electromagnetic reflection loss and oxidation resistance of pyrolytic carbon-Si3N4 ceramics with dense Si3N4 coating. J Eur Ceram Soc 32:1485–148910.1016/j.jeurceramsoc.2012.01.027 ↗
15. Ye F, Zhang L, Yin X et al (2012) Fabrication of Si3N4–SiBC composite ceramic and its excellent electromagnetic properties. J Eur Ceram Soc 32:4025–402910.1016/j.jeurceramsoc.2012.07.002 ↗
16. Li Z, Zhou W, Su X et al (2008) Preparation and characterization of aluminum-doped silicon carbide by combustion synthesis. J Am Ceram Soc 91:2607–261010.1111/j.1551-2916.2008.02526.x ↗
17. Yuan X, Cheng L, Zhang Y et al (2016) Fe-doped SiC/SiO2 composites with ordered inter-filled structure for effective high-temperature microwave attenuation. Mater Des 92:563–57010.1016/j.matdes.2015.12.090 ↗
18. Jones RH, Henager CH (2005) Subcritical crack growth processes in SiC/SiC ceramic matrix composites. J Eur Ceram Soc 25:1717–172210.1016/j.jeurceramsoc.2004.12.015 ↗
19. Su XL, Jia Y, Wang JB et al (2014) Preparation, dielectric property and microwave absorption property of Cu doped SiC nanopowder by combustion synthesis. Adv Appl Ceram 113:262–26610.1179/1743676114Y.0000000153 ↗
20. Su X, Zhou W, Xu J et al (2010) Improvement of permittivity of SiC with Al doping by combustion synthesis using Al2O3. J Alloys Compd 492:16–1910.1016/j.jallcom.2009.11.097 ↗
21. Liu H, Tian H (2012) Mechanical and microwave dielectric properties of SiCf/SiC composites with BN interphase prepared by dip-coating process. J Eur Ceram Soc 32:2505–251210.1016/j.jeurceramsoc.2012.02.009 ↗
22. Liu Q, Ye F, Hou Z et al (2013) A new approach for the net-shape fabrication of porous Si3N4 bonded SiC ceramics with high strength. J Eur Ceram Soc 33:2421–242710.1016/j.jeurceramsoc.2013.04.034 ↗
23. Zheng GP, Yin XW, Wang J et al (2012) Complex permittivity and microwave absorbing property of Si3N4–SiC composite ceramic. J Mater Sci Technol 28:745–75010.1016/S1005-0302(12)60124-8 ↗
24. Zhang H, Zhang J, Zhang H (2007) Computation of radar absorbing silicon carbide foams and their silica matrix composites. Comput Mater Sci 38:857–86410.1016/j.commatsci.2006.05.024 ↗
25. Peng CH, Chen PS, Chang CC (2014) High-temperature microwave bilayer absorber based on lithium aluminum silicate/lithium aluminum silicate-SiC composite. Ceram Int 40:47–5510.1016/j.ceramint.2013.05.101 ↗
26. Fa L, Huan J, Dongmei Z, Wancheng Z (2005) Dielectric properties of SiC/LAS composite. Mater Lett 59:105–10910.1016/j.matlet.2004.09.026 ↗
27. Gutmann B, Obermayer D, Reichart B et al (2010) Sintered silicon carbide: a new ceramic vessel material for microwave chemistry in single-mode reactors. Chem A Eur J 16:12182–1219410.1002/chem.201001703 ↗
28. Shan D, Li Z, Zhu Y et al (2012) Influence of TiO2 on the physical properties of low-temperature ceramic vitrified bond and mechanical properties of CBN composites. Ceram Int 38:4573–457810.1016/j.ceramint.2012.02.035 ↗
29. Lin KH, Peng SF, Lin ST (2007) Sintering parameters and wear performances of vitrified bond diamond grinding wheels. Int J Refract Met Hard Mater 25:25–3110.1016/j.ijrmhm.2005.11.002 ↗
30. Herman D, Krzos J (2009) Influence of vitrified bond structure on radial wear of cBN grinding wheels. J Mater Process Technol 209:5377–538610.1016/j.jmatprotec.2009.03.013 ↗
31. Lim KY, Kim YW, Song IH (2013) Porous sodium borate-bonded SiC ceramics. Ceram Int 39:6827–683410.1016/j.ceramint.2013.02.014 ↗
32. Lim KY, Kim YW, Song IH (2013) Low-temperature processing of porous SiC ceramics. J Mater Sci 48:1973–197910.1007/s10853-012-6963-4 ↗