Physical mechanism of surface blistering process in H-implanted Ge
Source abstract
Abstract
Hydrogen (H) implantation-induced damage was investigated in (100) germanium (Ge) for the physical understanding of the surface blistering phenomenon. Ge samples were implanted at liquid nitrogen and room temperatures using 100 keV H+ ions with a fluence of 1 × 1017 cm−2. The hydrogen ion current density was kept at 10 µA cm−2 during the implantation. H-implanted samples were subsequently annealed at higher temperatures up to 500 °C in order to trigger surface blistering. X-ray diffraction studies of the H-implanted samples showed the existence of damage-induced stress and its prominent dependence on the implantation temperature. Damage-induced stress was found to be sufficiently large to guide the hydrogen diffusion and defects agglomeration. Microstructural investigations of the H-induced damage were carried out using cross-sectional transmission electron microscopy and annular dark-field scanning transmission electron microscopy. It showed that H-induced agglomerated defects were in the form of platelets surrounded by the strain field. Strain field strains the matrix lattice for the eventual occurrence of surface blistering in H-implanted Ge.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Ion-surface interactions and analysis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Bruel M (1995) Silicon-on-insulator material technology. Electron Lett 31:1201–120210.1049/el:19950805 ↗
2. Colinge CA, Byun KY, Ferain IP, Yu R, Goorsky M (2011) Low-temperature fabrication of germanium-on-insulator using remote plasma activation bonding and hydrogen exfoliation. In: Nazarov A, Colinge J-P, Balestra F, Raskin J-P, Gamiz F, Lysenko VS (eds) Semiconductor-on-insulator materials for nanoelectronics applications. Springer, Heidelberg, pp 31–4610.1007/978-3-642-15868-1_2 ↗
3. Dadwal U, Kumar P, Moutanabbir O, Reiche M, Singh R (2014) Effect of implantation temperature on the H-induced microstructural damage in AlN. J Alloys Comp 588:300–30410.1016/j.jallcom.2013.10.227 ↗
4. Tong Q-Y, Gutjahr K, Hopfe S, Gösele U, Lee T-H (1997) Layer splitting process in hydrogen-implanted Si, Ge, SiC, and diamond substrates. Appl Phys Lett 70:1390–139210.1063/1.118586 ↗
5. Feng X-Q, Huang Y (2004) Mechanics of smart-cut® technology. Int J Solids Struct 41:4299–432010.1016/j.ijsolstr.2004.02.054 ↗
6. Nastasi M, Höchbauer T, Lee JK, Misra A, Hirth JP, Ridgway M, Lafford T (2005) Nucleation and growth of platelets in hydrogen-ion-implanted silicon. Appl Phys Lett 86:154102–154102-310.1063/1.1900309 ↗
7. Zahler JM, Morral AFI, Griggs MJ, Atwater HA, Chabal YJ (2007) Role of hydrogen in hydrogen-induced layer exfoliation of germanium. Phys Rev B 75:035309–035309-1010.1103/PhysRevB.75.035309 ↗
8. David ML, Pizzagalli L, Pailloux F, Barbot JF (2009) Atomic scale structure of (001) hydrogen-induced platelets in germanium. Phys Rev Lett 102:155504–155504-410.1103/PhysRevLett.102.155504 ↗
9. Kumar P, Dadwal U, Singh R (2013) Investigation of internal pressure and stress in the buckled H-implanted Ge layer. Proc AIP Conf 1536:1284–128510.1063/1.4810711 ↗
10. Large LN, Bicknell RW (1967) Ion-implantation doping of semiconductors. J Mater Sci 2:589–60910.1007/BF00752224 ↗
11. Burnett PJ, Page TF (1984) Surface softening in silicon by ion implantation. J Mater Sci 19:845–86010.1007/BF00540455 ↗
12. Weldon MK, Marsico VE, Chabal YJ, Agarwal A et al (1997) On the mechanism of the hydrogen-induced exfoliation of silicon. J Vac Sci Technol B 15:1065–107310.1116/1.589416 ↗
13. David ML, Pailloux F, Babonneau D, Drouet M, Barbot JF, Simoen E, Claeys C (2007) The effect of the substrate temperature on extended defects created by hydrogen implantation in germanium. J Appl Phys 102:096101–096101-310.1063/1.2803715 ↗
14. Moulet C, Goorsky MS (2012) Lattice Strain Measurements in Hydrogen Implanted Materials for Layer Transfer Processes. In: Goorsky SM (ed) Ion Implantation. InTech, Rijeka, pp 65–88
15. Lee J-K, Lin Y, Jia QX, Höchbauer T, Jung HS, Shao L, Misra A, Nastasi M (2006) Role of strain in the blistering of hydrogen-implanted silicon. Appl Phys Lett 89:101901–101901-310.1063/1.2345245 ↗
16. Kumar P, Rodrigues G, Lakshmy PS, Kanjilal D, Kumar R (2008) Charge-state distributions of metallic electron cyclotron resonance plasmas. J Vac Sci Technol A 26:97–10210.1116/1.2823486 ↗
17. Hähnel A, Bauer J, Blumtritt H, Breitenstein O, Lausch D, Kwapil W (2013) Electron microscope verification of prebreakdown-inducing α-FeSi2 needles in multicrystalline silicon solar cells. J Appl Phys 113:044505–044505-1010.1063/1.4779601 ↗
18. Dadwal U, Praveen Kumar, Singh R (2013) Effect of implantation temperature on the layer exfoliation of H-implanted germanium. J Nano Electron Phys 5:02002–02002-3
19. Reboh S, De Mattos AA, Barbot JF, Declemy A, Beaufort MF, Papaléo RM, Bergmann CP, Fichtner PFP (2009) Localized exfoliation versus delamination in H and He coimplanted (001) Si. J Appl Phys 105:093528–093528-610.1063/1.3116738 ↗
20. David ML, Barbot JF, Rousselet S, Pailloux F, Babonneau D, Beaufort MF, Pizzagalli L, Drouet M, Simoen E, Claeys C (2008) Extended defects created by light ion implantation in Ge. ECS Trans 16:163–17510.1149/1.2980301 ↗
21. Jaccodine RJ (1963) Surface energy of germanium and silicon. J Electrochem Soc 110:524–52710.1149/1.2425806 ↗
22. Information to users (2008) UMI microform 1459200. ProQuest LLC, Ann Arbor, p 32