journal article·2001-12

Simulation of the flow strength and microstructure of titanium aluminide in hot forging

M. C. Abernathy, R. A. Mirsham, A. Raman, B. Q. Li, A. A. Wereszczak

Journal of Materials Science· Volume 36· Issue 23
Publisher page

Abstract

The main purpose of this investigation is to develop a mathematical relationship for the flow strength based on microstructure evolution during the hot forming of titanium aluminide. For engineering applications, gamma titanium-aluminide which is composed of 46–50 at.% Al is desired in a duplex grain microstructure. Thermomechanical processing of this alloy requires a temperature of 0.60–0.75 T M (melting point) in order to properly control the microstructure and grain growth. Compression tests were conducted in the temperature range between 950–1100°C at strain rates of 0.001/s and 0.1/s to develop a duplex phase microstructure, gamma with 5–20% α2. By using the experimental data, mathematical relationships were verified for different stages of hardening, recovery, recrystallization, and grain growth. The simulation was based on the theory used in the Sandstrom and Lagneborg model and the numerical analysis approach developed by Pietrzyk. The simulation proved that the model and numerical simulation well-presented the compression deformation of titanium-aluminide alloys at constant strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. S. L. Semiatin, V. Seetharaman and I. Weiss, JOM 49 (1997) 33.10.1007/BF02914711 ↗
2. P. L. Orsetti rossi and C. M. Sellars, Acta Materialia 45 (1997) 137.10.1016/S1359-6454(96)00167-X ↗
3. C. M. Sabinash, S. M. L. Sastry and K. L. Jerina, Materials Science and Engineering A192/193 (1995) 837.10.1016/0921-5093(95)03333-5 ↗
4. R. A. Mirshams, Z. X. Li and H. P. Mohamadian, J. Mater. Sci. Lett. 16 (1997) 715.10.1023/A:1018516727620 ↗
5. R. A. Mirshams, Report to U.S. Army-TACOM, Contract #DAAE07–93–C-R127, June 1997.
6. R. Sandstrom and R. Lagneborg, Acta Metall. 23 (1975) 387.10.1016/0001-6160(75)90132-7 ↗
7. R. Sandstrom and R. Lagneborg, ibid. 23 (1975) 481.10.1016/0001-6160(75)90087-5 ↗
8. M. Pietryzk, Journal De Physique IV (1993) 1163.
9. Metals Handbook, Metallography and Microstructures, Vol. 9, 9th ed. (ASM, 1985) p. 460.
10. A. A. Hameda and L. Blaz, Scripta Materialia 37 (1997) 1987.10.1016/S1359-6462(97)00391-6 ↗
11. W. Roberts and B. Ahlblom, Acta Metall. 26 (1978) 801.10.1016/0001-6160(78)90030-5 ↗
12. V. Seetharaman and S. L. Semiatin, Metallurgical and Materials Transactions A 27A (1996) 1987.10.1007/BF02651948 ↗
13. Idem., ibid. 28A (1997) 2309.
14. S. L. Semiatin, V. Seetharaman and V. K. Jain, ibid. 25A (1994) 2753.10.1007/BF02649227 ↗
15. V. Seetharaman and S. L. Semiatin, ibid. 28A (1997) 947.10.1007/s11661-997-0225-0 ↗
16. U. Hofmann and W. Blum, Scripta Metallurgica et Materialia 32 (1995) 371.10.1016/S0956-716X(99)80067-3 ↗
17. K. Y. Wang, R. A. Mirshams and B. Q. Li, in the Conference Proceedings of Advanced Materials Processing, TMS, Honolulu, Hawaii, 1998, p. 2007.
18. M. Pietryzk, C. Roucoules and P. D. Hodgson, in the Conference Proceedings of Simulation of Materials Processing: Theory Methods and Applications, edited by Shen and Dawson (1995) p. 315.
19. M. Pietryzk, Metallurgy and Foundry Engineering 20 (1994) 429.
20. S. Illendula, R.A. Mirshams, W. Wang and B.Q. Li, in Proceedings of the Int. Symposium on Processing of Metals and Advanced Materials, TMS Annual Meeting, San Antonio, 1998, p. 121.
21. U. Hofmann, R. Sedlacek and W. Blum, Z. Metallkd 87 (1997) 411.