journal article·2013-08

Fatigue crack propagation and in-situ observations in three tool steel alloys manufactured using a rapid solidification technique

M. Rüssel, T. Mottitschka, S. Martin, L. Krüger, W. Kreuzer

Journal of Materials Science· Volume 48· Issue 15
Publisher page

Abstract

By utilizing special manufacturing conditions, e.g., using only pure elements and applying a rapid cooling rate, tool materials with high quasi-static fracture toughness can be produced. However, tool materials are often subjected to cyclic loading and, hence, their lifetime is dominated by fatigue failure. This study is focused on fracture mechanics and in-situ experiments to characterize the fatigue crack propagation behavior of three newly developed tool steels at a stress ratio R of 0.05. Microstructural examinations revealed that the materials consist of the phases α′-martensite, retained austenite, and complex carbides in different amounts. Results of preliminary tests are presented, in which it was attempted to grow the crack in a plane parallel to the plane of the starter notch. The determined ∆K threshold values ranged between 4 and 5 MPa√m with Paris–Erdogan exponents of 3.3–4.6. In-situ observations were performed to understand the inherent damage mechanisms and microstructural effects during fatigue loading. These observations showed that fatigue crack growth is mainly dominated by the ductility of the martensitic–austenitic matrix. Only in cases in which the primary carbides are oriented favorably (with respect to the direction of crack propagation) does the crack follow the coherent carbide network to a certain extent. Furthermore, for the first time, a phase transformation from retained austenite to α′-martensite was detected at the crack tip during fatigue crack propagation for the material group of tool steels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Rescalvo JA, Averbach B (1979) Metall Mater Trans A 10:126510.1007/BF02811982 ↗
2. Lou B, Averbach BL (1983) Metall Trans A 14:188910.1007/BF02645560 ↗
3. Berns H, Lueg J, Trojahn W, Wähling R, Wisell H (1987) Powder Metall Int 19(4):22
4. Iqbal A, King JE (1990) Int J Fatigue 12(4):23410.1016/0142-1123(90)90450-S ↗
5. Torres Y, Rodríguez S, Mateo A, Anglada L, Llanes L (2004) Mater Sci Eng A 387–389:50110.1016/j.msea.2003.12.072 ↗
6. Jesner G, Pippan R (2009) Metall Mater Trans A 40:81010.1007/s11661-008-9770-4 ↗
7. Brandrup-Wognsen H, Engström J, Grinder O (1988) Powder Metall Int 20(1):18
8. Meurling F, Melander A, Tidesten M, Westin L (2001) Int J Fatigue 23:21510.1016/S0142-1123(00)00087-6 ↗
9. Picas I, Cuadrado N, Casellas D, Goez A, Llanes L (2010) Procedia Eng 2:177710.1016/j.proeng.2010.03.191 ↗
10. Hufenbach J, Giebeler L, Hoffmann M, Kohlar S, Kühn U, Gemming T, Oswald S, Eigenmann B, Eckert J (2012) Acta Mater 60:446810.1016/j.actamat.2012.04.041 ↗
11. Rüssel M, Martin S, Krüger L, Kreuzer W (2012) Metall Mater Trans A 43:364210.1007/s11661-012-1180-y ↗
12. Rüssel M, Martin S, Krüger L, Kreuzer W (2012) J Mater Sci 47:6915. doi: 10.1007/s10853-012-6637-210.1007/s10853-012-6637-2 ↗
13. ASTM E647 (2008) Standard test method for measurement of fatigue crack growth rates. American Society for Testing & Materials, West Conshohocken
14. ISO 12108 (2002) Metallic materials—fatigue testing—fatigue crack growth method. British Standards Institution, London
15. Zerbst U, Hübner P (2004) Bruchmechanische Bewertung von Fehlern in Schweißverbindungen, DVS Merkblatt 2401. Dvs-Verlag, Dusseldorf
16. Döker H (1997) Int J Fatigue 19(1):14510.1016/S0142-1123(97)00058-3 ↗
17. Lange G (2001) Systematische Beurteilung technischer Schadensfälle. Wiley–VCH Verlag GmbH & Co. KGaA, Weinheim
18. Gurland J (1972) Acta Metall 20(5):73510.1016/0001-6160(72)90102-2 ↗
19. Weber K (2004) Beanspruchungsgerechte Gefügeanalyse und zerstörungsfreie Prüfung von Chromgusseisen. Dissertation, Otto-von-Guericke Universität Magdeburg
20. Suresh S (1983) Metall Trans A 14:237510.1007/BF02663313 ↗
21. Porter DL, Evans AG, Heuer AH (1979) Acta Metall 27:164910.1016/0001-6160(79)90046-4 ↗
22. Evans AG (1990) J Am Ceram Soc 73(2):18710.1111/j.1151-2916.1990.tb06493.x ↗
23. Hornbogen E (1978) Acta Metall 26:14710.1016/0001-6160(78)90211-0 ↗
24. Hübner P, Schlosser H, Pusch G, Biermann H (2007) Int J Fatigue 29:178810.1016/j.ijfatigue.2007.01.012 ↗