journal article·2003-08

Effects of interface properties on densification in a grain compact during sintering

H. Camacho, M. E. Fuentes, L. Fuentes

Journal of Materials Science· Volume 38· Issue 15
Publisher page

Abstract

A theoretical approach to describe the relationship between the interface properties and densification for sintering materials is presented. This approach is developed by assuming simplified grain boundary geometry, where scaling is imposed. In general, the results are in good agreement with theoretical calculations from other studies, as well as with available experimental data. The model predicts a higher densification rate in particle agglomerates, if grain growth is inhibited. Hence, qualitative predictions lead to a plausible explanation, for instance, for the effect of niobium doping on PZT ceramics experimentally reported in the literature. The bulk and shear viscosities, as well as the sintering stress are reported.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. J. Frenkel, J. Phys. USSR 9 (1945) 385.
2. J.K. Mackenzie and R. Shuttleworth, Proc. Phys. Soc. Lond. 62 (1949) 833.10.1088/0370-1301/62/12/310 ↗
3. R. K. Bordia and G. W. Scherer, Acta Metall. 36 (1988) 2393.10.1016/0001-6160(88)90189-7 ↗
4. G. W. Scherer, J. Amer. Ceram. Soc. 74 (1991) 1523.10.1111/j.1151-2916.1991.tb07135.x ↗
5. J. I. MartÍnez-Herrera and J. J. Derby, ibid. 78 (1995) 645.10.1111/j.1151-2916.1995.tb08226.x ↗
6. G. A. L. van de Vorst, R. M. M. Matheu and H. K. Kuiken, J. Comput. Phys. 100 (1992) 50.10.1016/0021-9991(92)90309-M ↗
7. R. L. Coble, J. Appl. Phys. 32 (1961) 787.10.1063/1.1736107 ↗
8. H. Riedel, H. Zipse and J. Svoboda, Acta Metall. Mater. 42 (1994) 445.10.1016/0956-7151(94)90499-5 ↗
9. H. Riedel, V. Kozak and J. Svoboda, ibid. 42 (1994) 3039.
10. J. Svoboda, H. Riedel and H. Zipse, ibid. 42 (1994) 435.10.1016/0956-7151(94)90498-7 ↗
11. J. Svoboda and H. Riedel, ibid. 43 (1995) 499.10.1016/0956-7151(94)00249-H ↗
12. J. Pan and A. C. F. Cocks, ibid. 43 (1995) 1395.10.1016/0956-7151(94)00365-O ↗
13. N. D. Aparicio and A. C. F. Cocks, ibid. 43 (1995) 3873.10.1016/0956-7151(95)90170-1 ↗
14. W. Zhang, J. H. Schneibel and C.-H. Hsueh, Philos. Mag. A 70 (1994) 1107.10.1080/01418619408242952 ↗
15. W. D. Kingery, H. K. Bowen and D. R. Uhlmann, “Introduction to Ceramics” (John Wiley & Sons, 1975).
16. A. Jagota and G. W. Scherer, J. Amer. Ceram. Soc. 78 (1995) 521.10.1111/j.1151-2916.1995.tb08209.x ↗
17. G. W. Scherer, J. Amer. Ceram. Soc. Idem., ibid.} 76 (1993) 3123.10.1111/j.1151-2916.1993.tb06617.x ↗
18. A. Jagota, K. R. Mikeska and R. K. Bordia, ibid. 73 (1990) 2266.10.1111/j.1151-2916.1990.tb07587.x ↗
19. W. W. Mullins, Acta Mater. 17 (1998) 6219.10.1016/S1359-6454(98)00259-6 ↗
20. Idem., ibid. 11 (1989) 2979.10.1016/0001-6160(89)90333-7 ↗
21. Idem., J. Appl. Phys. 59 (1986) 1341.10.1063/1.336528 ↗
22. M. Upmanyu, R. W. Smith and D. J. Srolovitz, Inter. Sci. 6 (1999) 41.
23. M. Upmanyu, D. J. Srolovitz, L. S. Shvindlerman and G. Gottstein, Acta Mater. 47 (1999) 3901.10.1016/S1359-6454(99)00240-2 ↗
24. M. Furtkamp, G. Gottstein and L. S. Shvindlerman, Inter. Sci. 6 (1998) 277.
25. J. Kanters, U. Eisele and J. RÖdel, J. Amer. Ceram. Soc. 84 (2001) 2757.10.1111/j.1151-2916.2001.tb01091.x ↗
26. P. Duran, Bol. Soc. Esp Cerám. Vidrio 38(5) (1999) 403.10.3989/cyv.1999.v38.i5.921 ↗
27. J. M. Ting and R. Y. Lin, J. Mater. Sci. 29 (1994) 1867.10.1007/BF00351306 ↗
28. M. D. Durruthy, L. Fuentes, M. Hernandez and H. Camacho, J. Mater. Sci. 9 (2000) 2311.10.1023/A:1004751632634 ↗
29. J. Han, P. Q. Mantas and A. M. R. Senos, J. Mater. Res. 2 (2001) 459.10.1557/JMR.2001.0069 ↗
30. J. Castro, T. De Los RÍos and L. Fuentes, Mater. Manufac. Proc. 2 (2000) 301.10.1080/10426910008912989 ↗
31. M. N. Rahaman, “Ceramic Processing and Sintering” (Marcel Dekker, Inc., 1995).