journal article·2008-11

Production of A356–SiCP composite by an innovative casting process

S. M. H. Mirbagheri, S. Sookhtehsaraee

Journal of Materials Science· Volume 43· Issue 21
Publisher page

Abstract

In the present study, a novel procedure was introduced for casting of metal matrix composites by adding a mortar consisting expandable polystyrene beads, carboxy methyl cellulose paste, SiC particles and water as a mould pattern. This process was applied for A356 Aluminium alloy/SiCP composite. Technology of this method is based on a balance between the solidification rate and the buoyancy of the reinforcement particles. The experimental results show that effective parameters in fabrication of a sound part are density and size of pre-puff polystyrene beads, percentage of the reinforcement particles, mould material, thickness of mould cavity, casting temperature and cooling rate. However, the innovative method will only be successful for the thin-wall parts, which their solidification times become shorter than the floatation time of the reinforcement particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Dole TJA, Bowen P (1996) Composites Part A 27A:655. doi: https://doi.org/10.1016/1359-835X(96)00040-110.1016/1359-835X(96)00040-1 ↗
2. McDanels DL (1985) Metall Trans A 16A:1105. doi: https://doi.org/10.1007/BF0281167910.1007/BF02811679 ↗
3. Miller WS, Lenssen LA, Humphreys FJ (1989) In: Sanders TH Jr, Starke EA Jr (eds) Proceedings of the fifth international aluminum-lithium conference. MCEP, Birmingham, p 931
4. Yang Y, Cady C, Hu MS, Zok F, Mehrabian AGR (1990) Acta Metall Mater 38:2613. doi: https://doi.org/10.1016/0956-7151(90)90273-J10.1016/0956-7151(90)90273-J ↗
5. Clyne TW, Withers PJ (1995) An introduction to metal matrix composites. Cambridge University Press, Cambridge
6. Lee JC, Byun JY, Park SB, Lee HI (1998) Acta Mater 46:1771. doi: https://doi.org/10.1016/S1359-6454(97)00265-610.1016/S1359-6454(97)00265-6 ↗
7. Tham LM, Gupta M, Cheng L (2001) Acta Mater 49:3243. doi: https://doi.org/10.1016/S1359-6454(01)00221-X10.1016/S1359-6454(01)00221-X ↗
8. Lee JC, Seok HK, Lee HI (1999) Mater Res Bull 34:35. doi: https://doi.org/10.1016/S0025-5408(98)00215-310.1016/S0025-5408(98)00215-3 ↗
9. Lee JC, Byun JY, Oh CS, Seok HK, Lee HI (1997) Acta Mater 45:5303. doi: https://doi.org/10.1016/S1359-6454(97)84851-310.1016/S1359-6454(97)84851-3 ↗
10. Zhou W, Xu ZM (1997) J Mater Process Technol 63:358. doi: https://doi.org/10.1016/S0924-0136(96)02647-710.1016/S0924-0136(96)02647-7 ↗
11. Bartos G, Xia K (1996) Proceedings of the 4th international conference on semi-solid processing of alloy and composites, University of Sheffield, England
12. Singer ARE (1991) Mater Sci Eng A 135:13. doi: https://doi.org/10.1016/0921-5093(91)90528-U10.1016/0921-5093(91)90528-U ↗
13. Yeu DH (1995) A study on the formation mechanism and heat transfer analysis of billet by spray forming prices. Ph.D dissertation, Seoul National University, Seoul, Korea
14. Lee JC, Park SB, Seok HK, Oh CS, Lee HI (1998) Acta Mater 46:2635. doi: https://doi.org/10.1016/S1359-6454(97)00465-510.1016/S1359-6454(97)00465-5 ↗
15. Shen Y-L, Williams JJ, Piotrowski G, Chawla N, Guo YL (2001) Acta Mater 49:3219. doi: https://doi.org/10.1016/S1359-6454(01)00226-910.1016/S1359-6454(01)00226-9 ↗
16. Hashim J, Looney L, Hashmi MSJ (2001) Mater Process Technol 119:324. doi: https://doi.org/10.1016/S0924-0136(01)00975-X10.1016/S0924-0136(01)00975-X ↗
17. Ruddle W (1975) The solidification of castings. The Institute of Metals Press, London
18. Bindumadhavan PN, Chia TK, Chandrasekaran M, Wah HK, Lam LN, Prabhakar O (2001) Mater Sci Eng A315:21710.1016/S0921-5093(00)01989-4 ↗
19. Roy M, Venkataraman B (1992) Metall Trans A 23:283310.1007/BF02651761 ↗
20. Akhlaghi F, Lajavardi A, Maghanaki HM (2004) Mater Process Technol 155–156:1874. doi: https://doi.org/10.1016/j.jmatprotec.2004.04.32810.1016/j.jmatprotec.2004.04.328 ↗
21. Skolianos S, Kattamis TZ (1993) Mater Sci Eng A 163:107. doi: https://doi.org/10.1016/0921-5093(93)90584-210.1016/0921-5093(93)90584-2 ↗