journal article·2023-07Open access

Tape of the truth: Ta2O5 nanopore array formed under broad potential range and SERS potential after silver sputtering

Jan Krajczewski, Aleksandra Michałowska, Robert Ambroziak

Journal of Materials Science· Volume 58· Issue 28

Abstract

Abstract The deposition of a plasmonic metal layer on a nanostructured oxide surface is one of the important methods of preparing a platform for surface-enhanced Raman scattering (SERS) measurements. In this contribution, we describe the formation of SERS substrates by the deposition of a silver layer on ordered a Ta2O5 nanopore array. The influence of various experimental anodization process parameters on the morphology of a Ta2O5 nanopore array was carefully studied. It was found that the formation of a Ta2O5 nanopore array is possible under a broad potential range (15–50 V) in a highly acidic solution containing F− ions. In some cases, the nanopore array structures were covered by an outer layer rich in F− and SO42− ions, which could easily be removed using adhesive tape or by sonication. The deposition of an Ag layer led to SERS activity. The optimal Ag layer thickness was specified based on SEM and DRS measurements. The SERS substrates formed exhibited high point-to-point, sample-to-sample and time durability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Gold and Silver Nanoparticles Synthesis and Applications · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Petry R, Schmitt M, Popp J (2003) Raman spectroscopy—a prospective tool in the life sciences. Chem Phys Chem 4:14–30. https://doi.org/10.1002/cphc.20039000410.1002/cphc.200390004 ↗
2. Kudelski A (2008) Analytical applications of Raman spectroscopy. Talanta 76:1–8. https://doi.org/10.1016/j.talanta.2008.02.04210.1016/j.talanta.2008.02.042 ↗
3. Tian Z-Q, Ren B, Wu D-Y (2002) Surface-enhanced Raman scattering: from noble to transition metals and from rough surfaces to ordered nanostructures. J Phys Chem B 106:9463–9483. https://doi.org/10.1021/jp025744910.1021/jp0257449 ↗
4. Otto A (1991) Surface-enhanced Raman scattering of adsorbates. J Raman Spectrosc 22:743–752. https://doi.org/10.1002/jrs.125022120410.1002/jrs.1250221204 ↗
5. Cara E, Mandrile L, Sacco A et al (2020) Towards a traceable enhancement factor in surface-enhanced Raman spectroscopy. J Mater Chem C 8:16513–16519. https://doi.org/10.1039/D0TC04364H10.1039/D0TC04364H ↗
6. Le Ru EC, Blackie E, Meyer M, Etchegoin PG (2007) Surface enhanced Raman scattering enhancement factors: a comprehensive study. J Phys Chem C 111:13794–13803. https://doi.org/10.1021/jp068790810.1021/jp0687908 ↗
7. Natan MJ (2006) Concluding remarks: surface enhanced Raman scattering. Faraday Discuss 132:321–328. https://doi.org/10.1039/b601494c10.1039/b601494c ↗
8. Kneipp K, Wang Y, Kneipp H et al (1997) Single molecule detection using surface-enhanced Raman scattering (SERS). Phys Rev Lett 78:1667–1670. https://doi.org/10.1103/PhysRevLett.78.166710.1103/PhysRevLett.78.1667 ↗
9. Michaels AM, Nirmal M, Brus LE (1999) Surface enhanced Raman spectroscopy of individual rhodamine 6G molecules on large Ag nanocrystals. J Am Chem Soc 121:9932–9939. https://doi.org/10.1021/ja992128q10.1021/ja992128q ↗
10. Liu H, Zhang L, Lang X et al (2011) Single molecule detection from a large-scale SERS-active Au79Ag21 substrate. Sci Rep 1:112. https://doi.org/10.1038/srep0011210.1038/srep00112 ↗
11. Bańkowska M, Krajczewski J, Dzięcielewski I et al (2016) Au–Cu alloyed plasmonic layer on nanostructured GaN for SERS application. J Phys Chem C 120:1841–1846. https://doi.org/10.1021/acs.jpcc.5b1137110.1021/acs.jpcc.5b11371 ↗
12. Wang K, Sun D-W, Pu H, Wei Q (2019) Shell thickness-dependent Au@Ag nanoparticles aggregates for high-performance SERS applications. Talanta 195:506–515. https://doi.org/10.1016/j.talanta.2018.11.05710.1016/j.talanta.2018.11.057 ↗
13. Krajczewski J, Michałowska A, Kudelski A (2020) Star-shaped plasmonic nanostructures: new, simply synthetized materials for Raman analysis of surfaces. Spectrochim Acta Part A Mol Biomol Spectrosc 225:117469. https://doi.org/10.1016/j.saa.2019.11746910.1016/j.saa.2019.117469 ↗
14. Balmes O, Bovin J-O, Malm J-O, Xu H (2005) Homogeneous surface-enhanced Raman scattering observed from self-assembled gold nanoparticle films deposited from the liquid–liquid interface. Vib Spectrosc 37:189–193. https://doi.org/10.1016/j.vibspec.2004.09.00210.1016/j.vibspec.2004.09.002 ↗
15. Weyher JL, van Dorp DH, Conard T et al (2022) Chemical etching of GaN in KOH solution: role of surface polarity and prior photoetching. J Phys Chem C 126:1115–1124. https://doi.org/10.1021/acs.jpcc.1c0652810.1021/acs.jpcc.1c06528 ↗
16. Krajczewski J, Michałowska A, Čtvrtlík R et al (2023) The battle for the future of SERS—TiN vs Au thin films with the same morphology. Appl Surf Sci 618:156703. https://doi.org/10.1016/j.apsusc.2023.15670310.1016/j.apsusc.2023.156703 ↗
17. Zhou B, Li X, Shi T et al (2017) Synthesis and morphology control of diluted Si nanowire arrays by metal-assisted chemical etching and thermal oxidation based on nanosphere lithography. J Mater Sci 52:6449–6458. https://doi.org/10.1007/s10853-017-0880-510.1007/s10853-017-0880-5 ↗
18. Krajczewski J, Dumiszewska E, Czolak D et al (2023) New, epitaxial approach to SERS platform preparation—InP nanowires coated by an Au layer as a new, highly active, and stable SERS platform. Appl Surf Sci 607:155096. https://doi.org/10.1016/j.apsusc.2022.15509610.1016/j.apsusc.2022.155096 ↗
19. Prudkovskiy VS, Hu Y, Zhang K et al (2022) An epitaxial graphene platform for zero-energy edge state nanoelectronics. Nat Commun 13:7814. https://doi.org/10.1038/s41467-022-34369-410.1038/s41467-022-34369-4 ↗
20. Sudarsan U, Devanathan R, Solanki R (1991) Comparison of defect structures in homo- and hetero-epitaxial GaP, grown using excimer laser-assisted MOVPE. J Mater Sci 26:2309–2312. https://doi.org/10.1007/BF0113017410.1007/BF01130174 ↗
21. Huang M, Weng S, Wang B et al (2014) Various facet tunable ZnO crystals by a scalable solvothermal synthesis and their facet-dependent photocatalytic activities. J Phys Chem C 118:25434–25440. https://doi.org/10.1021/jp507256710.1021/jp5072567 ↗
22. Zare M, Namratha K, Byrappa K et al (2018) Surfactant assisted solvothermal synthesis of ZnO nanoparticles and study of their antimicrobial and antioxidant properties. J Mater Sci Technol 34:1035–1043. https://doi.org/10.1016/j.jmst.2017.09.01410.1016/j.jmst.2017.09.014 ↗
23. Yin S, Komatsu M, Liu B et al (2008) Improvement of thermal stability of nitrogen doped titania photocatalyst by addition of surfactants during solvothermal treatment. J Mater Sci 43:2240–2246. https://doi.org/10.1007/s10853-007-2071-210.1007/s10853-007-2071-2 ↗
24. Ruiz-Clavijo A, Caballero-Calero O, Martín-González M (2021) Revisiting anodic alumina templates: from fabrication to applications. Nanoscale 13:2227–2265. https://doi.org/10.1039/D0NR07582E10.1039/D0NR07582E ↗
25. Kondo T, Nagao S, Yanagishita T et al (2015) Ideally ordered porous TiO2 prepared by anodization of pretextured Ti by nanoimprinting process. Electrochem commun 50:73–76. https://doi.org/10.1016/j.elecom.2014.11.01310.1016/j.elecom.2014.11.013 ↗
26. Krajczewski J, Ambroziak R, Turczyniak-Surdacka S, Dziubałtowska M (2022) WO3 nanopores array modified by Au trisoctahedral NPs: formation characterization and SERS application. Materials (Basel) 15:8706. https://doi.org/10.3390/ma1523870610.3390/ma15238706 ↗
27. Fanton L, Cremasco A, Mello MG, Caram R (2019) Anodization growth of TiO2 nanotubes on Ti–35Nb–7Zr–5Ta alloy: effects of anodization time, strain hardening, and crystallographic texture. J Mater Sci 54:13724–13739. https://doi.org/10.1007/s10853-019-03870-510.1007/s10853-019-03870-5 ↗
28. Ambroziak R, Hołdyński M, Płociński T et al (2019) Cubic silver nanoparticles fixed on TiO2 nanotubes as simple and efficient substrates for surface enhanced Raman scattering. Materials (Basel) 12:3373. https://doi.org/10.3390/ma1220337310.3390/ma12203373 ↗
29. Zhang W, Tian Q, Chen Z et al (2020) Arrayed nanopore silver thin films for surface-enhanced Raman scattering. RSC Adv 10:23908–23915. https://doi.org/10.1039/D0RA03803B10.1039/D0RA03803B ↗
30. Song Y, Wang Y, Bin LB et al (2013) Interface interaction induced ultra-dense nanoparticles assemblies. Nanoscale 5:6779–6789. https://doi.org/10.1039/c3nr01366a10.1039/c3nr01366a ↗
31. Wang N, Li H, Wang J et al (2012) Study on the anticorrosion, biocompatibility, and osteoinductivity of tantalum decorated with tantalum oxide nanotube array films. ACS Appl Mater Interfaces 4:4516–4523. https://doi.org/10.1021/am300727v10.1021/am300727v ↗
32. Sarraf M, Razak BA, Nasiri-Tabrizi B et al (2017) Nanomechanical properties, wear resistance and in-vitro characterization of Ta2O5 nanotubes coating on biomedical grade Ti–6Al–4V. J Mech Behav Biomed Mater 66:159–171. https://doi.org/10.1016/j.jmbbm.2016.11.01210.1016/j.jmbbm.2016.11.012 ↗
33. Krajczewski J, Turczyniak-Surdacka S, Dziubałtowska M et al (2022) Ordered zirconium dioxide nanotubes covered with an evaporated gold layer as reversible, chemically inert and very efficient substrates for surface-enhanced Raman scattering (SERS) measurement. Spectrochim Acta Part A Mol Biomol Spectrosc 275:121183. https://doi.org/10.1016/j.saa.2022.12118310.1016/j.saa.2022.121183 ↗
34. Liu K, Li D, Li R et al (2013) Silver-decorated ZnO hexagonal nanoplate arrays as SERS-active substrates: an experimental and simulation study. J Mater Res 28:3374–3383. https://doi.org/10.1557/jmr.2013.35610.1557/jmr.2013.356 ↗
35. Macák JM, Tsuchiya H, Schmuki P (2005) High-aspect-ratio TiO2 nanotubes by anodization of titanium. Angew Chem Int Ed 44:2100–2102. https://doi.org/10.1002/anie.20046245910.1002/anie.200462459 ↗
36. Parkhutik VP, Shershulsky VI (1992) Theoretical modelling of porous oxide growth on aluminium. J Phys D Appl Phys 25:1258–1263. https://doi.org/10.1088/0022-3727/25/8/01710.1088/0022-3727/25/8/017 ↗
37. Li Y, Nagato K, Delaunay J-J et al (2014) Fabrication of highly ordered Ta2O5 and Ta3N5 nanorod arrays by nanoimprinting and through-mask anodization. Nanotechnology 25:014013. https://doi.org/10.1088/0957-4484/25/1/01401310.1088/0957-4484/25/1/014013 ↗
38. Fan R, Wan J (2017) Electrode distance regulates the anodic growth of titanium dioxide (TiO 2) nanotubes. Nanotechnology 28:25LT01. https://doi.org/10.1088/1361-6528/aa703d10.1088/1361-6528/aa703d ↗
39. El-Sayed HA, Birss VI (2009) Controlled interconversion of nanoarray of Ta dimples and high aspect ratio Ta oxide nanotubes. Nano Lett 9:1350–1355. https://doi.org/10.1021/nl803010v10.1021/nl803010v ↗
40. Barton JE, Stender CL, Li P, Odom TW (2009) Structural control of anodized tantalum oxide nanotubes. J Mater Chem 19:4896–4898. https://doi.org/10.1039/b904964a10.1039/b904964a ↗
41. Kudelski A (2009) Surface-enhanced Raman scattering study of monolayers formed from mixtures of 4-mercaptobenzoic acid and various aromatic mercapto-derivative bases. J Raman Spectrosc 40:2037–2043. https://doi.org/10.1002/jrs.236710.1002/jrs.2367 ↗
42. Michota A, Bukowska J (2003) Surface-enhanced Raman scattering (SERS) of 4-mercaptobenzoic acid on silver and gold substrates. J Raman Spectrosc 34:21–25. https://doi.org/10.1002/jrs.92810.1002/jrs.928 ↗
43. Lee SB, Kim K, Kim MS (1991) Surface-enhanced Raman scattering of o-mercaptobenzoic acid in silver sol. J Raman Spectrosc 22:811–817. https://doi.org/10.1002/jrs.125022121410.1002/jrs.1250221214 ↗