Investigation of Al-induced electroless cobalt–tin alloy deposition on Cu substrate
Source abstract
Abstract
Cobalt–tin co-deposition was carried out on a Cu substrate by an electroless process where Al acts as a prime reducing agent. A second metal attached to the substrate, more electro-negative than the metal to be deposited, acts as an inducer, and film deposition proceeds due to the galvanic couple between the substrate and Al. The bath temperature was varied and ranged from room temperature to 90 °C, though improved deposit morphology was found around 80 °C. The pH and Sn/Co metal salt ratio in the bath solution were varied to observe the effect on the Sn/Co elemental ratio in the deposit. The deposits were examined by X-ray diffraction spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy to gain insight into the structure, surface morphology, and elemental composition. These ferromagnetic Co–Sn films could be an alternative to conventional chrome plating fabricated by a simple and economic deposition process.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Cho SK, Han HS, Lee CK, Ahn CI, Park JI (2003) Tin–cobalt alloy plating in a pyrophosphate bath. Mater Sci Forum 439:57–6110.4028/www.scientific.net/MSF.439.57 ↗
2. Valkova T, Krastev I (2016) Influence of glycine on the electrochemical deposition of Sn–Co alloy from gluconate electrolyte. Bulg Chem Commun 48:78–84
3. Goâmez E, Guaus E, Torrent J, Alcobe X, Valleâ E (2001) Tin–cobalt electrodeposition from sulfate–gluconate bath. J Appl Electrochem 31:349–35410.1023/A:1017540305439 ↗
4. Hemsley JDC, Roper ME (1979) Tin–cobalt alloy plating from a sulphate electrolyte. Trans Inst Met Finish 57:77–8010.1080/00202967.1979.11870489 ↗
5. Gul H, Uysal M, Centikaya T, Guler MO, Alp A, Akbulut H (2014) Preparation of Sn–Co alloy electrode for lithium ion batteries by pulse electrodeposition. Int J Hydrog Energy 39:21414–2141910.1016/j.ijhydene.2014.08.076 ↗
6. Wang W, Zhang J, Li B, Shi L (2019) Electrochemical investigation of Sn–Co alloys as anode for Na-ion batteries. J Alloys Compd 780:565–56910.1016/j.jallcom.2018.11.410 ↗
7. Ferguson PP, Todd ADW, Dahn JR (2008) Comparison of mechanically alloyed and sputtered tin–cobalt–carbon as an anode material for lithium-ion batteries. Electrochem commun 10:25–3110.1016/j.elecom.2007.10.025 ↗
8. Xue LJ, Xu YF, Huang L, Ke FS, He Y, Wang YX, Wei GZ, Li JT, Sun SG (2011) Lithium storage performance and interfacial processes of three dimensional porous Sn–Co alloy electrodes for lithium-ion batteries. Electrochim Acta 56:5979–598710.1016/j.electacta.2011.04.103 ↗
9. Ke FS, Huang L, Wei HB, Cai JS, Fan XY, Yang FZ, Sun SG (2007) Fabrication and properties of macroporous tin–cobalt alloy film electrodes for lithium-ion batteries. J Power Sources 170:450–45510.1016/j.jpowsour.2007.04.019 ↗
10. Ferrara G, Damen L, Arbizzani C, Inguanta R, Piazza S, Sunseri C, Mastragostino M (2011) SnCo nanowire array as negative electrode for lithium-ion batteries. J Power Sources 196:1469–147310.1016/j.jpowsour.2010.09.039 ↗
11. Sujatha M, Sabitha R, Pushpavanam M (2000) Electrodeposited tin–cobalt alloy from a neutral gluconate bath. Tran Inst Met Finish 78:49–5210.1080/00202967.2000.11871304 ↗
12. Zhang X, Wang F, Zhou Y, Liang A, Zhang J (2018) Aluminum-induced direct electroless deposition of Co and Co–P coatings on copper and their catalytic performance for electrochemical water splitting. Surf Coat Technol 352:42–4810.1016/j.surfcoat.2018.07.092 ↗
13. Singh PC, Ghosh S (2020) Characterization of Al-induced electroless tin films on mild steel substrate for corrosion protection. Surf Topogr Metrol Prop 8:02500210.1088/2051-672X/ab82a4 ↗
14. Shinde S, Ghosh S (2022) Room temperature Al-induced electroless tin film deposition enabled by ultrasound irradiation. Surf Topogr Metrol Prop 10:02500610.1088/2051-672X/ac5781 ↗
15. Ghosh S (2019) Investigation of Al-induced electroless Sn film deposition on Cu substrate. Thin Solid Films 692:13757810.1016/j.tsf.2019.137578 ↗
16. Zhang X, Han W, Fan D, Zheng Y (2014) Electroless iron plating on pure magnesium for biomedical applications. Mater Lett 130:154–15610.1016/j.matlet.2014.05.102 ↗
17. Zhang X, Zhou Y, Liang A, Zhang B, Zhang J (2016) Facile fabrication and corrosion behaviour of iron and iron-reduced graphene oxide composite coatings by electroless plating from baths containing no reducing agent. Surf Coat Technol 304:519–52410.1016/j.surfcoat.2016.07.071 ↗
18. Djega-Mariadassou C, Lecocq P, Michel A (1969) Etude magnetique et structurale des phases M Sn2 et M Sn (M = Fe, Co) et des solutions solides (Fex M1–x)Sn, (Fex M1–x) Sn2 (M = Co, Ni). Ann Chim (France) 4:175–182 ((In French))
19. Armbruester M, Schmidt M, Cardoso-Gil R, Borrmann H, Grin Y (2007) Crystal structures of iron distannide, FeSn2, and cobalt distannide, CoSn2. Z. fur Krist. New Cryst Struct 222:83–84
20. Owen EA, Madoc Jone D (1954) Effect of grain size on the crystal structure of cobalt. Proc Phys Soc London 67:459–466
21. Salamat A, Briggs R, Bouvier P, Petitgirard S, Dewaele A, Cutler ME, Cora F, Daisenberger D, Garbarino G, McMillan PE (2013) High-pressure structural transformations of Sn up to 138 GPa: angle-dispersive synchrotron X-ray diffraction study. Phys Rev B Condens Matter 88:1–910.1103/PhysRevB.88.104104 ↗
22. Wolcyrz M, Kubiak R, Maciejewski S (1981) X-ray investigation of thermal expansion and atomic thermal vibrations of tin, indium, and their alloys. Phys Status Solidi B Basic Res 107:245–25310.1002/pssb.2221070125 ↗
23. Degtyareva VF, Ivakhnenko SA, Ponyatovskii EG, Rashupkin VI (1979) Crystal structures and superconductivity of Sn–Bi alloys after exposure to high pressure. Fizika Tverdogo Tela (Sankt-Petersburg) 21:752–756
24. Ellner M (1976) Über die kristallchemischen parameter der Ni-, Co- und Fe-haltigen phasen vom NiAs-Typ. J less-common met 48:21–52 (In German)10.1016/0022-5088(76)90231-9 ↗
25. Bindra P, White JR (1990) Electroless plating: fundamentals and applications. American Electroplaters Society 289–375
26. Barker BD (1981) Electroless deposition of metals. Surf Technol 12:77–8810.1016/0376-4583(81)90138-2 ↗
27. Takeno N (2005) Atlas of Eh-pH diagrams. Geolo surv Japan open file report 419:241–243
28. Chivot J, Mendoza L, Mansour C, Pauporté T, Cassir M (2008) New insight in the behavior of Co–H2O system at 25–150 °C, based on revised Pourbaix diagrams. Corros Sci 50:62–6910.1016/j.corsci.2007.07.002 ↗
29. Comert H, Pratt JN (1992) Constitutional studies of cobalt–tin alloys. Metall Mater Trans A 23:2401–240710.1007/BF02658043 ↗