journal article·2023-01

In situ preparation of Ti/CaB6 composites via powder metallurgy: microstructure, mechanical and tribological properties improvement

Xinxin Wu, Yu Pan, Jinshan Zhang, Jianzhuo Sun, Yanjun Liu, Fan Kuang, Ce Zhang, Yucheng Yang, Xin Lu

Journal of Materials Science· Volume 58· Issue 4
Publisher page

Abstract

Titanium (Ti) alloys suffer from poor mechanical strength and inferior wear resistance. Herein, we introduced the calcium hexa boride (CaB6) into Ti matrix to manufacture high-strength and high-wear in situ Ti matrix composites (TMCs) by powder metallurgy method. The effects of CaB6 addition on the microstructure, mechanical and tribological properties of TMCs were studied. Results show that the formation of hard in situ TiB and nano-size CaTiO3 particles contributes to a remarkable refinement of average grain size from 163 μm in pure Ti to 74 μm in Ti–1.0 wt.% CaB6 composite. The hardness is significantly increased from 191 ± 15 HV in pure Ti to 321 ± 13 HV in Ti–0.8 wt.% CaB6 composite. The Ti–0.8 wt.% CaB6 composite obtains the best comprehensive mechanical properties with an ultimate tensile strength of 740.3 ± 28.3 MPa, yield strength of 598.4 ± 23.1 MPa and elongation of 10.6 ± 1.5% and displays the optimal wear resistance with friction coefficients of 0.45, 50% less than pure Ti, under constant conditions (3 N, 0.03 m/s).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Hayat MD, Singh H, He Z, Cao P (2019) Titanium metal matrix composites: An overview. Compos Part A-Appl S 121:418–438. https://doi.org/10.1016/j.compositesa.2019.04.00510.1016/j.compositesa.2019.04.005 ↗
2. Chen G, Peng YB, Zheng G, Qi ZX, Wang MZ, Yu HC, Dong CL, Liu CT (2016) Polysynthetic twinned TiAl single crystals for high-temperature applications. Nat Mater 15(8):876. https://doi.org/10.1038/NMAT467710.1038/NMAT4677 ↗
3. Zhang CJ, Sun YG, Chen YF, Lian YZ, Zhang SZ, Feng H, Zhou YW, Kong FT, Chen YY (2019) Deformation behavior and microstructure evolution mechanism of 5 vol.% (TiBw + TiCp)/Ti composites during isothermal compression. Mater Charact 154:212–221. https://doi.org/10.1016/j.matchar.2019.06.00210.1016/j.matchar.2019.06.002 ↗
4. Li YX, Su KQ, Bai PK, Wu LY (2020) Microstructure and property characterization of Ti/TiBCN reinforced Ti based composite coatings fabricated by laser cladding with different scanning speed. Mater Charact 159:110023. https://doi.org/10.1016/j.matchar.2019.11002310.1016/j.matchar.2019.110023 ↗
5. Liu PW, Han YF, Qiu PK, Xu FS, Chen Y, Du LH, Huang GF, Mao JW, Lu WJ (2018) Isothermal deformation and spheroidization mechanism of (TiB + La2O3)/Ti composites with different initial structures. Mater Charact 146:15–24. https://doi.org/10.1016/j.matchar.2018.09.04010.1016/j.matchar.2018.09.040 ↗
6. Abkowitz S, Abkowitz SM, Fisher H, Schwartz PJ (2004) CermeTi (R) discontinuously reinforced Ti-matrix composites: manufacturing, properties, and applications. JOM-US 56(5):37–41. https://doi.org/10.1007/s11837-004-0126-210.1007/s11837-004-0126-2 ↗
7. Williams JC, Starke EA (2003) Progress in structural materials for aerospace systems. Acta Mater 51(19):5775–5799. https://doi.org/10.1016/j.actamat.2003.08.02310.1016/j.actamat.2003.08.023 ↗
8. Banerjee D, Williams JC (2013) Perspectives on Titanium Science and Technology. Acta Mater 61(3):844–879. https://doi.org/10.1016/j.actamat.2012.10.04310.1016/j.actamat.2012.10.043 ↗
9. Lu X, Pan Y, Li WB, Hayat MD, Yang F, Singh H, Song WW, Qu XH, Xu Y, Cao P (2020) High-performance Ti composites reinforced with in-situ TiC derived from pyrolysis of polycarbosilane. Mat Sci Eng A-Struct 795:139924. https://doi.org/10.1016/j.msea.2020.13992410.1016/j.msea.2020.139924 ↗
10. Zhang XN, Wu RJ (2003) Manufacture and performance of particulate reinforced titanium matrix composites. Key Eng Mater 249:205–209. https://doi.org/10.4028/www.scientific.net/KEM.249.20510.4028/www.scientific.net/KEM.249.205 ↗
11. Sun ZY, Zhu LP, Mo XF, Nan H, Ding XF (2021) Microstructure characterization and properties of graphene oxide-reinforced TiAl matrix composites. Metals 11(6):883. https://doi.org/10.3390/met1106088310.3390/met11060883 ↗
12. Ramesh CS, Ahamed A (2011) Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites. Wear 271(9–10):1928–1939. https://doi.org/10.1016/j.wear.2010.12.04810.1016/j.wear.2010.12.048 ↗
13. Li J, Zhang XJ, Wang HP, Li MP (2013) Microstructure and mechanical properties of Ni-based composite coatings reinforced by in situ synthesized TiB2 + TiC by laser cladding. Int J Min Met Mater 20(1):57–64. https://doi.org/10.1007/s12613-013-0693-810.1007/s12613-013-0693-8 ↗
14. Jahani B, Jazi MS, Azarmi F, Croll A (2018) Effect of volume fraction of reinforcement phase on mechanical behavior of ultra-high-temperature composite consisting of iron matrix and TiB2 particulates. J Compos Mater 52(5):609–620. https://doi.org/10.1177/002199831771256910.1177/0021998317712569 ↗
15. Li SF, Kondoh K, Imai H, Chen B, Jia L, Umeda J, Fu YB (2016) Strengthening behavior of in situ-synthesized (TiC-TiB)/Ti composites by powder metallurgy and hot extrusion. Mater Design 95:127–132. https://doi.org/10.1016/j.matdes.2016.01.09210.1016/j.matdes.2016.01.092 ↗
16. Saito T (2004) The automotive application of discontinuously reinforced TiB-Ti composites. JOM-US 56(5):33–36. https://doi.org/10.1007/s11837-004-0125-310.1007/s11837-004-0125-3 ↗
17. Singh H, Hayat MD, Zhang HZ, Cao P (2019) The decomposition of Si3N4 in titanium and its effect on wear properties. Wear 420:87–95. https://doi.org/10.1016/j.wear.2018.12.09410.1016/j.wear.2018.12.094 ↗
18. Zhang SM, Wang MJ, Wen M, Wu M, Wang QF, Huang H (2019) Interfacial reactions and matrix microstructure evolution in SiCf/Ti composites dominated by primary structure of Ti matrix. Ceram Int 45(14):17767–17774. https://doi.org/10.1016/j.ceramint.2019.05.34710.1016/j.ceramint.2019.05.347 ↗
19. Cai C, Song B, Qiu CL, Li LF, Xue PJ, Wei QS, Zhou JX, Nan H, Chen HX, Shi YS (2017) Hot isostatic pressing of in-situ TiB/Ti–6Al–4V composites with novel reinforcement architecture, enhanced hardness and elevated tribological properties. J Alloy Compd 710:364–374. https://doi.org/10.1016/j.jallcom.2017.03.16010.1016/j.jallcom.2017.03.160 ↗
20. Zhu L, Zhang KW, Fan SQ, Wei WH (2022) Ti6Al4V matrix composites fabricated by laser powder bed fusion in dilute nitrogen. Mater Sci Tech-Lond 38(4):207–214. https://doi.org/10.1080/02670836.2022.203354210.1080/02670836.2022.2033542 ↗
21. Geng L, Ni DR, Zhang J, Zheng ZZ (2008) Hybrid effect of TiBw and TiCp on tensile properties of in situ titanium matrix composites. J Alloy Compd 463(1–2):488–492. https://doi.org/10.1016/j.jallcom.2007.09.05410.1016/j.jallcom.2007.09.054 ↗
22. Boehlert CJ, Tamirisakandala S, Curtin WA, Miracle DB (2009) Assessment of in situ TiB whisker tensile strength and optimization of TiB-reinforced titanium alloy design. Scripta Mater 61(3):245–248. https://doi.org/10.1016/j.scriptamat.2009.03.05410.1016/j.scriptamat.2009.03.054 ↗
23. Singh H, Hayat M, Zhang HZ, Das R, Cao P (2019) Effect of TiB2 content on microstructure and properties of in situ Ti–TiB composites. Int J Min Met Mater 26(7):915–924. https://doi.org/10.1007/s12613-019-1797-610.1007/s12613-019-1797-6 ↗
24. Cai C, Radoslaw C, Zhang JL, Yan Q, Wen SF, Song B, Shi YS (2019) In-situ preparation and formation of TiB/Ti–6Al–4V nanocomposite via laser additive manufacturing: Microstructure evolution and tribological behavior. Powder Technol 342:73–84. https://doi.org/10.1016/j.powtec.2018.09.08810.1016/j.powtec.2018.09.088 ↗
25. Yan M, Dargusch MS, Ebel T, Qian M (2014) A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti–6Al–4V and their impacts on ductility. Acta Mater 68:196–206. https://doi.org/10.1016/j.actamat.2014.01.01510.1016/j.actamat.2014.01.015 ↗
26. Han YF, Kuang W, Yang XF, Li JX, Huang GF, Lv WJ, Zhang D (2016) Effect of La and B addition on the microstructure and mechanical properties of titanium matrix composite. Rare Metal Mat Eng 45(12):3104–3107. https://doi.org/10.1016/s1875-5372(17)30062-010.1016/s1875-5372(17)30062-0 ↗
27. Wang DJ, Wei XS, Shen J (2014) Microstructure and mechanical properties of Al-Ni-Ce amorphous matrix composites enhanced with Ti-based glassy particles prepared by powder metallurgy. Mater Lett 133:35–39. https://doi.org/10.1016/j.matlet.2014.05.21510.1016/j.matlet.2014.05.215 ↗
28. Lu JQ, Qin JN, Lu WJ, Liu Y, Gu JJ, Zhang D (2009) In situ preparation of (TiB + TiC + Nd2O3)/Ti composites by powder metallurgy. J Alloy Compd 469(1–2):116–122. https://doi.org/10.1016/j.jallcom.2008.01.12410.1016/j.jallcom.2008.01.124 ↗
29. Liu YB, Liu Y, Wang B, Qiu JW, Liu B, Tang HP (2010) microstructures evolution and mechanical properties of a powder metallurgical titanium alloy with yttrium addition. Mater Manuf Process 25(8):735–739. https://doi.org/10.1080/1042691090336577810.1080/10426910903365778 ↗
30. Wang LQ, Lu WJ, Qin JN, Zhang F, Zhang D (2009) Tensile properties of in situ synthesized (TiB + La2O3)/beta-Ti composite. Mat Sci Eng C-Mater 29(6):1897–1900. https://doi.org/10.1016/j.msec.2009.02.02410.1016/j.msec.2009.02.024 ↗
31. Yang YF, Li SF, Qian M, Zhu QS, Hu CQ, Shi Y (2018) Enabling the development of ductile powder metallurgy titanium alloys by a unique scavenger of oxygen and chlorine. J Alloy Compd 764:467–475. https://doi.org/10.1016/j.jallcom.2018.06.11010.1016/j.jallcom.2018.06.110 ↗
32. Zhang C, Yang F, Guo ZM, Wang HY, Lu BX (2018) Oxygen scavenging, grain refinement and mechanical properties improvement in powder metallurgy titanium and titanium alloys with CaB6. Powder Technol 340:362–369. https://doi.org/10.1016/j.powtec.2018.09.05410.1016/j.powtec.2018.09.054 ↗
33. Oh JM, Kwon H, Kim W, Lim JW (2014) Oxygen behavior during non-contact deoxidation of titanium powder using calcium vapor. Thin Solid Films 551:98–101. https://doi.org/10.1016/j.tsf.2013.11.07610.1016/j.tsf.2013.11.076 ↗
34. Namini AS, Azadbeh M, Asl MS (2017) Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites. Adv Powder Technol 28(6):1564–1572. https://doi.org/10.1016/j.apt.2017.03.02810.1016/j.apt.2017.03.028 ↗
35. Sabahi Namini A, Motallebzadeh A, Nayebi B, Shahedi Asl M, Azadbeh M (2019) Microstructure–mechanical properties correlation in spark plasma sintered Ti–4.8wt.% TiB2 composites. Mater Chem Phys 223:789–796. https://doi.org/10.1016/j.matchemphys.2018.11.05710.1016/j.matchemphys.2018.11.057 ↗
36. Singh H, Hayat M, He Z, Peterson VK, Das R, Cao P (2019) In situ neutron diffraction observations of Ti–TiB composites. Compos Part A-Appl S 124:105501. https://doi.org/10.1016/j.compositesa.2019.10550110.1016/j.compositesa.2019.105501 ↗
37. Gaisin RA, Imayev VM, Imayev RM, Gaisina ER (2015) Microstructure and mechanical properties of Ti–TiB based short-fiber composite materials manufactured by casting and subjected to deformation processing. Russ Phys J 58(6):848–853. https://doi.org/10.1007/s11182-015-0580-z10.1007/s11182-015-0580-z ↗
38. Ota A, Yamazaki M, Izui H (2012) Effects of raw powder morphology and size on tensile properties of SPS-consolidated TiB/Ti composites. Key Eng Mater 520:276–280. https://doi.org/10.4028/www.scientific.net/KEM.520.27610.4028/www.scientific.net/KEM.520.276 ↗
39. Zhang C, Guo ZM, Yang F, Wang HY, Shao YR, Lu BX (2018) In situ formation of low interstitials Ti–TiC composites by gas-solid reaction. J Alloy Compd 769:37–44. https://doi.org/10.1016/j.jallcom.2018.07.34410.1016/j.jallcom.2018.07.344 ↗
40. Ma FC, Zhou JJ, Liu P, Li W, Liu XK, Pan D, Lu WJ, Zhang D, Wu LZ, Wei XQ (2017) Strengthening effects of TiC particles and microstructure refinement in in situ TiC-reinforced Ti matrix composites. Mater Charact 127:27–34. https://doi.org/10.1016/j.matchar.2017.02.00410.1016/j.matchar.2017.02.004 ↗
41. Zhang W, Zhou SQ, Ren WJ, Yang YJ, Shi L, Zhou QH, Liu MB (2021) Uniformly dispersing GNPs for fabricating graphene-reinforced pure Ti matrix composites with enhanced strength and ductility. J Alloy Compd 888:161527. https://doi.org/10.1016/j.jallcom.2021.16152710.1016/j.jallcom.2021.161527 ↗
42. Karimi M, Toroghinejad MR (2014) An alternative method for manufacturing high-strength CP Ti–SiC composites by accumulative roll bonding process. Mater Design 59:494–501. https://doi.org/10.1016/j.matdes.2014.03.04010.1016/j.matdes.2014.03.040 ↗
43. Weng F, Yu HJ, Chen CZ, Liu JL, Zhao LJ, Dai JJ, Zhao ZH (2017) Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti–6Al–4V alloy. J Alloy Compd 692:989–996. https://doi.org/10.1016/j.jallcom.2016.09.07110.1016/j.jallcom.2016.09.071 ↗
44. Jin JB, Zhou SF, Zhao Y, Zhang Q, Wang XJ, Li W, Chen DC, Zhang LC (2021) Refined microstructure and enhanced wear resistance of titanium matrix composites produced by selective laser melting. Opt Laser Technol 134:106644. https://doi.org/10.1016/j.optlastec.2020.10664410.1016/j.optlastec.2020.106644 ↗
45. Pan Y, Zhang JS, Sun JZ, Liu YJ, Zhang C, Li R, Kuang F, Wu XX, Lu X (2023) Enhanced strength and ductility in a powder metallurgy Ti material by the oxygen scavenger of CaB6. J Mater Sci Technol 137:132–142. https://doi.org/10.1016/j.jmst.2022.07.04210.1016/j.jmst.2022.07.042 ↗
46. Pan Y, Pi ZQ, Liu BW, Xu W, Zhang C, Qu XH, Lu X (2020) Influence of heat treatment on the microstructural evolution and mechanical properties of W6Mo5Cr4V2Co5Nb (825 K) high speed steel. Mat Sci Eng A-Struct 787:139480. https://doi.org/10.1016/j.msea.2020.13948010.1016/j.msea.2020.139480 ↗
47. Pan Y, Xiao SQ, Lu X, Zhou C, Li Y, Liu ZW, Liu BW, Xu W, Jia CC, Qu XH (2019) Fabrication, mechanical properties and electrical conductivity of Al2O3 reinforced Cu/CNTs composites. J Alloy Compd 782:1015–1023. https://doi.org/10.1016/j.jallcom.2018.12.22210.1016/j.jallcom.2018.12.222 ↗
48. Nayak SK, Hung CJ, Sharma V, Alpay SP, Dongare AM, Brindley WJ, Hebert RJ (2018) Insight into point defects and impurities in titanium from first principles. npj Comput Mater 4:11. https://doi.org/10.1038/s41524-018-0068-910.1038/s41524-018-0068-9 ↗
49. Aronsson BO, Lausmaa J, Kasemo B (1997) Glow discharge plasma treatment for surface cleaning and modification of metallic biomaterials. J Biomed J Biomed Mater Res A 35(1):49–73. https://doi.org/10.1002/(SICI)1097-4636(199704)35:1%3c49::AID-JBM6%3e3.0.CO;2-M10.1002/(SICI)1097-4636(199704)35:1<49::AID-JBM6>3.0.CO;2-M ↗
50. Pan Y, Li WB, Lu X, Hayat MD, Yin L, Song WW, Qu XH, Cao P (2020) Microstructure and tribological properties of titanium matrix composites reinforced with in situ synthesized TiC particles. Mater Charact 170:110633. https://doi.org/10.1016/j.matchar.2020.11063310.1016/j.matchar.2020.110633 ↗