journal article·2022-11

Elevating the mechanical properties and corrosion resistance of AZ91 alloy by adding CaO and Al element

Lu Zhang, Shaoyuan Lyu, Chen You, Jia Zhao, Minfang Chen

Journal of Materials Science· Volume 57· Issue 42
Publisher page

Abstract

The effects of further addition of Al element (AZ91-0.7CaO-1Al (wt.%), AZCA) on microstructure, mechanical property and corrosion resistance of AZ91-0.7CaO (AZC, wt.%) alloy were investigated in comparison with commercial AZ91 (AZ91) alloy. The result showed that the addition of Al could further reduce the grain size of solution treated alloy to 34.4 μm on the basis of refinement from 167.8 to 58.2 μm by adding CaO particles in AZ91 alloy. The bulky β-Mg17Al12 was refined significantly after adding CaO particles and then a semi-continuous β-Mg17Al12 formed and more numerous supersaturation Al generated after further addition of Al. Meanwhile, the volume fraction of second phases decreased after adding CaO particles but then increased after further addition of Al. Although the higher second-phase density somewhat affects the fatigue life of AZCA alloys, the microhardness, compressive and tensile strength were also further increased due to the fine-grain strengthening and second-phase strengthening. Meanwhile, the supersaturation Al and semi-continuous β-Mg17Al12 can effectively promote the formation of protective films on AZCA alloy surface and reduce the annual corrosion rate to 8.3 mm/y in long-term salt spray corrosion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Cubides Y, Zhao D, Nash L, Yadav D, Xie K, Karaman I, Castaneda H (2020) Effects of dynamic recrystallization and strain-induced dynamic precipitation on the corrosion behavior of partially recrystallized Mg-9Al-1Zn alloys. J Magnes Alloy 8:101610.1016/j.jma.2020.09.005 ↗
2. Rakoch AG, Monakhova EP, Khabibullina ZV, Serdechnova M, Blawert C, Zheludkevich ML, Gladkova AA (2020) Plasma electrolytic oxidation of AZ31 and AZ91 magnesium alloys: comparison of coatings formation mechanism. J Magnes Alloy 8:58710.1016/j.jma.2020.06.002 ↗
3. Ubeda C, Garces G, Adeva P, Llorente I, Frankel GS, Fajardo S (2020) The role of the beta-Mg17Al12 phase on the anomalous hydrogen evolution and anodic dissolution of AZ magnesium alloys. Corros Sci 165:10838410.1016/j.corsci.2019.108384 ↗
4. Fajardo S, Bosch J, Frankel GS (2019) Anomalous hydrogen evolution on AZ31, AZ61 and AZ91 magnesium alloys in unbuffered sodium chloride solution. Corros Sci 146:16310.1016/j.corsci.2018.10.039 ↗
5. Vicario I, Crespo I, Plaza LM, Caballero P, Idoiaga IK (2016) Aluminium foam and magnesium compound casting produced by high-pressure die casting. Metals 6:2410.3390/met6010024 ↗
6. Zhang M, Li W, Zhao J, Chen M (2020) Comparative study of the effects of CaO and Ce-La misch metal on the microstructure and properties of AZ91 alloy. J Mater Res Technol 9:519410.1016/j.jmrt.2020.03.036 ↗
7. Nami B, Shabestari SG, Razavi H, Mirdamadi S, Miresmaeili SM (2011) Effect of Ca, RE elements and semi-solid processing on the microstructure and creep properties of AZ91 alloy. Mater Sci Eng A 528:126110.1016/j.msea.2010.10.004 ↗
8. Chen Y, Liu H, Ye R, Liu G (2013) Effects of the addition of Ca and Sb on the microstructure and mechanical properties of AZ91 magnesium. Mater Sci Eng A 587:26210.1016/j.msea.2013.07.092 ↗
9. Bankoti AKS, Mondal AK, Dieringa H, Ray BC, Kumar S (2016) Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy. Mater Sci Eng A 673:33210.1016/j.msea.2016.07.087 ↗
10. Wu L, Cui C, Wu R, Li J, Zhan H, Zhang M (2011) Effects of Ce-rich RE additions and heat treatment on the microstructure and tensile properties of Mg-Li-Al-Zn-based alloy. Mater Sci Eng A 528:217410.1016/j.msea.2010.11.063 ↗
11. Li F, Peh WY, Nagarajan V, Ho MK, Danno A, Chua BW, Tan MJ (2016) Development of non-flammable high strength AZ91 + Ca alloys via liquid forging and extrusion. Mater Des 99:3710.1016/j.matdes.2016.03.014 ↗
12. Zhang C, Wu L, Huang G, Huang Y, Jiang B, Atrens A, Pan F (2020) Effect of microalloyed Ca on the microstructure and corrosion behavior of extruded Mg alloy AZ31. J Alloys Compd 823:15384410.1016/j.jallcom.2020.153844 ↗
13. Allameh SH, Emamy M (2017) The effect of Ca content on the microstructure, hardness and tensile properties of AZ81 Mg cast alloy. J Mater Eng Perform 26:215110.1007/s11665-017-2671-1 ↗
14. Yim CD, Kim YM, You BS (2007) Effect of Ca addition on the corrosion resistance of gravity cast AZ31 magnesium alloy. Mater Trans 48(5):1023–102810.2320/matertrans.48.1023 ↗
15. Song L, Lu Y, Zhang Y, Li X, Cong M, Xu W (2019) The effect of Ca addition on microstructure and mechanical properties of extruded AZ31 alloys. Vacuum 168:10882210.1016/j.vacuum.2019.108822 ↗
16. Woo SK, Blawert C, Yasakau KA, Yi S, Scharnagl N, Suh BC, Kim YM, You BS, Yim CD (2020) Effects of combined addition of Ca and Y on the corrosion behaviours of die-cast AZ91D magnesium alloy. Corros Sci 166:10845110.1016/j.corsci.2020.108451 ↗
17. Majhi J, Ganguly S, Basu A, Mondal AK (2021) Improved corrosion response of squeeze-cast AZ91 magnesium alloy with calcium and bismuth additions. J Alloys Compd 873:15960010.1016/j.jallcom.2021.159600 ↗
18. Lee DB (2013) High temperature oxidation of AZ31+0.3wt.%Ca and AZ31+0.3wt.%CaO magnesium alloys. Corros Sci 70:24310.1016/j.corsci.2013.01.036 ↗
19. Ali Y, Qiu D, Jiang B, Pan F, Zhang M (2016) The influence of CaO addition on grain refinement of cast magnesium alloys. Scr Mater 114:10310.1016/j.scriptamat.2015.12.015 ↗
20. Lee TW, Park HW, Lim H, Kim SK, Lim SH (2017) Microstructural characterization of oxide layers in CaO added AZ31 Mg alloy. J Alloys Compd 714:39710.1016/j.jallcom.2017.04.262 ↗
21. Lee JK, Kim SK (2011) Effect of CaO composition on oxidation and burning behaviors of AM50 Mg alloy. T Nonferr Metal Soc 21:2310.1016/S1003-6326(11)61054-6 ↗
22. Kondoh K, Fujita J, Umeda J, Imai H, Enami K, Ohara M, Igarashi T (2011) Thermo-dynamic analysis on solid-state reduction of CaO particles dispersed in Mg-Al alloy. Mater Chem Phys 129:63110.1016/j.matchemphys.2011.05.017 ↗
23. Zhao J, You C, Chen M, Lyu S, Tie D, Liu H (2021) Effect of calcium oxide particle size on microstructure and properties of AZ91 Mg alloy. J Alloys Compd 886:16097010.1016/j.jallcom.2021.160970 ↗
24. Jun J (2014) Damping behaviors of as-cast and solution-treated AZ91-Ca magnesium alloys. J Alloys Compd 610:16910.1016/j.jallcom.2014.04.214 ↗
25. Zhang Y, Wu G, Liu W, Zhang L, Pang S, Wang Y, Ding W (2014) Effects of processing parameters and Ca content on microstructure and mechanical properties of squeeze casting AZ91-Ca alloys. Mater Sci Eng A 595:10910.1016/j.msea.2013.12.014 ↗
26. Cubides Y, Karayan AI, Vaughan MW, Karaman I, Castaneda H (2020) Enhanced mechanical properties and corrosion resistance of a fine-grained Mg-9Al-1Zn alloy: the role of bimodal grain structure and β-Mg17Al12 precipitates. Materialia 13:10084010.1016/j.mtla.2020.100840 ↗
27. Xu C, Xiao W, Hanada S, Yamagata H, Ma C (2015) The effect of scandium addition on microstructure and mechanical properties of Al–Si–Mg alloy: a multi-refinement modifier. Mater Charact 110:160–16910.1016/j.matchar.2015.10.030 ↗
28. Chen K, Xie X, Tang H, Sun H, Qin L, Zheng Y, Gu X, Fan Y (2020) In vitro and in vivo degradation behavior of Mg-2Sr-Ca and Mg-2Sr-Zn alloys. Bioact Mater 5:27510.1016/j.bioactmat.2020.02.014 ↗
29. Nam ND, Bian MZ, Forsyth M, Seter M, Tan M, Shin KS (2012) Effect of calcium oxide on the corrosion behaviour of AZ91 magnesium alloy. Corros Sci 64:26310.1016/j.corsci.2012.07.026 ↗
30. Sun J, Yang Z, Liu H, Han J, Wu Y, Zhuo X, Song D, Jiang J, Ma A, Wu G (2019) Tension-compression asymmetry of the AZ91 magnesium alloy with multi-heterogenous microstructure. Mater Sci Eng A 759:70310.1016/j.msea.2019.05.093 ↗
31. Xu Y, Zhang K, Li X, Lei J, Yang Y, Luo T (2008) High cycle fatigue properties of die-cast magnesium alloy AZ91d-1% MM. T Nonferr Metal Soc 18:s30610.1016/S1003-6326(10)60222-1 ↗
32. Zhang H, Wang W, Wei Y, Li J, Wang J (2011) Fatigue fracture mechanism of AZ31B magnesium alloy and its welded joint. T Nonferr Metal Soc 21:122510.1016/S1003-6326(11)60846-7 ↗
33. Wang B, Zhang P, Liu R, Duan Q, Zhang Z, Li X, Zhang Z (2018) An optimization criterion for fatigue strength of metallic materials. Mater Sci Eng A 736:10510.1016/j.msea.2018.08.085 ↗
34. Yu H, Xin Y, Wang M, Liu Q (2018) Hall-petch relationship in Mg alloys: a review. J Mater Sci Technol 34:24810.1016/j.jmst.2017.07.022 ↗
35. Li Z, Dong J, Zeng X, Lu C, Ding W (2007) Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg-9Al-1Zn alloy. Mater Sci Eng A 466:13410.1016/j.msea.2007.02.029 ↗
36. Han B, Dunand DC (2000) Microstructure and mechanical properties of magnesium containing high volume fractions of yttria dispersoids. Mater Sci Eng A 277:297–30410.1016/S0921-5093(99)00074-X ↗
37. Habibi MK, Joshi SP, Gupta M, Gupta M (2010) Hierarchical magnesium nano-composites for enhanced mechanical response. Acta Mater. 58:6104–611410.1016/j.actamat.2010.07.028 ↗
38. Xiang S, Wang X, Gupta M, Wu K, Hu X, Zheng M (2016) Graphene nanoplatelets induced heterogeneous bimodal structural magnesium matrix composites with enhanced mechanical properties. Sci Rep 6:3882410.1038/srep38824 ↗
39. Mingo B, Mohedano M, Blawert C, Del R, Hort N, Arrabal R (2019) Role of Ca on the corrosion resistance of Mg-9Al and Mg-9Al-0.5Mn alloys. J Alloys Compd 811:15199210.1016/j.jallcom.2019.151992 ↗