journal article·2021-10

Electrochemical performance of marimocarbon/lithium titanate composites synthesized by hydrothermal method for lithium-ion batteries

Kota Hasegawa, Hiroyuki Gunji, Ryuto Kijima, Mika Eguchi, Mikka Nishitani-Gamo, Toshihiro Ando, Kiyoharu Nakagawa

Journal of Materials Science· Volume 56· Issue 29
Publisher page

Abstract

We prepared and investigated the composites of the spinel Li4Ti5O12 (LTO) and Marimocarbon (MC) by the hydrothermal method that could form uniform electric paths without aggregation of the LTO particles for high capacity and high rate lithium-ion batteries. MC consisted of many fine carbon nanofilaments (CNFs) intertwined with each other in a complicated fashion. There are vacant space volumes of hundred nanometers between the CNFs. LTO particles were deposited in the space volumes among the tangled CNFs of the MCs. LTO is one of the most attractive anode materials for lithium-ion batteries because of its structural stability and safety. The morphology, microstructure and elemental composition of the LTO/MC composites were characterized by scanning electron microscopy (SEM), and X-ray diffraction (XRD). A charge–discharge test revealed that the LTO/MC composite (MC 10 wt%, prepared using a fluidized bed flow-reactor) produced the specific capacity of 170 mA g−1 at 1C (1C = 175 mA g−1). The LTO/MC composite maintained the specific capacity of 47 mAh g−1 even in the high rate zone at 30C whereas only the pristine LTO the produced 15 mAh g−1 at this rate. The unique structure of the LTO/MC composites can contribute to improving the electrochemical performance of the LTO anode. The LTO/MC composites can provide an effective approach to improve the lithium-ion battery performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Tarascon J-M, Armand M (2001) Issues and challenges facing rechargeable lithium batteries. Nature 414:359–36710.1038/35104644 ↗
2. Yi TF, Yang SY, Xie Y (2015) Recent advances of Li4Ti5O12 as a promising next generation anode material for high power lithium-ion batteries. J Mater Chem A 3:5750–577710.1039/C4TA06882C ↗
3. Yang C, KungS. j. Lin and W. C. Chien, SH (2014) Li3V2(PO4)3/C composite materials synthesized using the hydrothermal method with double-carbon sources. J Power Sources 251:296–30410.1016/j.jpowsour.2013.11.072 ↗
4. Ise K, Morimoto S, Harada Y, Takami N (2018) Large lithium storage in highly crystalline TiNb2O7 nanoparticles synthesized by a hydrothermal method as anodes for lithium-ion batteries. Solid State Ionics 320:7–1510.1016/j.ssi.2018.02.027 ↗
5. Ferg E, Gummow RJ, Kock A, Thackeray MM (1994) Spinel Anodes for Lithium-Ion Batteries. J Electrochem Soc 141:L147–L15010.1149/1.2059324 ↗
6. Ohzuku T, Ueda A, Yamamoto N, Iwakoshi Y (1995) Factor affecting the capacity retention of lithium-ion cells. J Power Sources 54:99–10210.1016/0378-7753(94)02047-7 ↗
7. Jansen AN, Kahaian AJ, Kepler KD, Nelson PA, Amine K, Dees DW, Vissers DR, Thackeray MM (1999) Development of a high-power lithium-ion battery. J Power Sources 81–82:902–90510.1016/S0378-7753(99)00268-2 ↗
8. Takami N, Inagaki H, Kishi T, Harada Y, Fujita Y, Hoshina K (2009) Electrochemical Kinetics and Safety of 2-Volt Class Li-Ion Battery System Using Lithium Titanium Oxide Anode. J Electrochem Soc 156:A128–A13210.1149/1.3043441 ↗
9. Goodenough JB, Kim Y (2010) Challenges for Rechargeable Li Batteries. Chem Mater 22:587–60310.1021/cm901452z ↗
10. Hang T, Mukoyama D, Nara H, Takami N, Momma T, Osaka T (2013) Electrochemical impedance spectroscopy analysis for lithium-ion battery using Li4Ti5O12 anode. J Power Sources 222:442–44710.1016/j.jpowsour.2012.09.010 ↗
11. Ge H, Chen L, Yuan W, Zhang Y, Fan Q, Osgood H, Matera D, Song XM, Wu G (2015) Unique mesoporous spinel Li4Ti5O12 nanosheets as anode materials for lithium-ion batteries. J Power Sources 297:436–44110.1016/j.jpowsour.2015.08.038 ↗
12. Pu Z, Lan Q, Li Y, Liu S, Yu D, Lv XJ (2019) Preparation of W-doped hierarchical porous Li4Ti5O12/brookite nanocomposites for high rate lithium ion batteries at −20 °C. J Power Source 437(22689):1–10
13. Zhang Q, Verde MG, Seo JK, Li X, Meng YS (2015) Structural and electrochemical properties of Gd-doped Li4Ti5O12 as anode material with improved rate capability for lithium-ion batteries. J Power Sources 280:355–36210.1016/j.jpowsour.2015.01.124 ↗
14. Liang Q, Cao N, Song Z, Gao X, Hou L, Guo T, Qin X (2017) Co-doped Li4Ti5O12 nanosheets with enhanced rate performance for lithium-ion batteries. Electrochim Acta 251:407–41410.1016/j.electacta.2017.08.121 ↗
15. Zhao S, Ka O, Xian X, Sun L, Wang J (2016) Effect of primary crystallite size on the high-rate performance of Li4Ti5O12 microspheres. Electrochim Acta 206:17–2510.1016/j.electacta.2016.04.132 ↗
16. Li X, Hu H, Huang S, Yu G, Gao L, Liu H, Yu Y (2013) Nano-sized Li4Ti5O12 anode material with excellent performance prepared by solid state reaction: The effect of precursor size and morphology. Electrochim Acta 112:356–36310.1016/j.electacta.2013.08.162 ↗
17. Kashkooli AG, Lui G, Farhad S, Lee DU, Feng K, Yu A, Chen Z (2016) Nano-particle size effect on the performance of Li4Ti5O12 spinel. Electrochim Acta 196:33–4010.1016/j.electacta.2016.02.153 ↗
18. Wang D, Shan Z, Liu X, Na R, Wang J, Liu H, j. Tian, (2018) High-rate Li4Ti5O12/porous activated graphene nanoplatelets composites using LiOH both as lithium source and activating agent. Electrochim Acta 262:9–1710.1016/j.electacta.2017.12.185 ↗
19. H. p. Liu, G. w. Wen, S. f. Bi, C. y. Wang, J. m. Hao and P. Gao, (2016) High rate cycling performance of nanosized Li4Ti5O12/graphene composites for lithium ion batteries. Electrochim Acta 192:38–4410.1016/j.electacta.2016.01.180 ↗
20. Cao N, Song Z, Liang Q, Gao X, Qin X (2017) Hierarchical Li4Ti5O12/C composite for lithium-ion batteries with enhanced rate performance. Electrochim Acta 235:200–20910.1016/j.electacta.2017.03.032 ↗
21. Guo X, Wang C, Chen M, Wang J, Zheng J (2009) Carbon coating of Li4Ti5O12 using amphiphilic carbonaceous material for improvement of lithium-ion battery performance. J Power Source 214:107–11210.1016/j.jpowsour.2012.04.097 ↗
22. Kang E, Jung YS, Kim G-H, Chun J, Wiesner U, Dillon AC, Kim JK, Lee J (2011) Highly Improved Rate Capability for a Lithium-Ion Battery Nano-Li4Ti5O12 Negative Electrode via Carbon-Coated Mesoporous Uniform Pores with a Simple Self-Assembly Method. Adv Funct Mater 21:4349–435710.1002/adfm.201101123 ↗
23. Nakagawa K, Oda H, Yamashita A, Okamoto M, Sato Y, Gamo H, N-Gamo M, Ogawa K (2009) A novel spherical carbon. J Mater Sci 44:221–226. https://doi.org/10.1007/s10853-008-3081-410.1007/s10853-008-3081-4 ↗
24. Ando T, Nakagawa K, N-Gamo M, Oda H (2009) Cladophora-form carbon comprising carbon nanomaterials radially grown on a spherical core, process for producing the same and production apparatus. US Pat 7(608):331
25. Eguchi M, Baba K, Onuma T, Yoshida K, Iwasawa K, Kobayashi Y, Uno K, Komatsu K, KoboriN-GamoAndo MMT (2012) Influence of Ionomer/carbon ratio on the performance of a polymer electrolyte fuel cell. Polymers 4:1645–165610.3390/polym4041645 ↗
26. Iwasawa K, Eguchi M, Miyoshi K, Ueda S, N-Gamo M, Ando T (2013) Preparation of TiO2/Marimo carbon composite. Transactions Mater Res Soc Jpn 38(4):573–57710.14723/tmrsj.38.573 ↗
27. Eguchi A, Okubo S, Yamamoto M, Kikuchi K, Uno Y, KobayashiN-GamoAndo MT (2010) Preparation of catalyst for a polymer electrolyte fuel cell using a novel spherical carbon support. J Power Sources 195:5862–586710.1016/j.jpowsour.2010.01.008 ↗
28. Eguchi M, Satou K, Iwasawa K, Nishitani-Gamo M, Ando T (2013) Preparation of the Pt-Co bimetallic catalyst on marimo carbon for PEFC. Transactions Mater Res Soc Jpn. 38(4):549–55310.14723/tmrsj.38.549 ↗
29. Baba K, N-Gamo M, Ando T, Eguchi M (2016) Durable Marimo-like carbon support for platinum nanoparticle catalyst in polymer electrolyte fuel cell. Electrochim Acta 213:447–45110.1016/j.electacta.2016.07.022 ↗
30. Baba K, N-Gamo M, Ando T, Eguchi M (2017) Preparation of catalyst for polymer electrolyte fuel cell using the Marimo-like carbon. Transactions Mater Res Soc Jpn 42(2):51–5610.14723/tmrsj.42.51 ↗
31. Chen J, Yang L, Fang S, Tang Y (2010) Synthesis of sawtooth-like Li4Ti5O12 nanosheets as anode materials for Li-ion batteries. Electrochim Acta 55:6596–660010.1016/j.electacta.2010.06.015 ↗
32. Wu HY, Hon MH, Kuan CY, Leu IC (2015) Hydrothermal synthesis of Li4Ti5O12 nanosheets as anode materials for lithium ion batteries. RSC Adv 5:35224–3522910.1039/C5RA01351H ↗