In situ synchrotron analysis of phase transformation at high temperatures in ODS ferritic steel
Source abstract
Abstract
Texture and microstructure evolution in a ferritic/martensitic 9wt%Cr oxide dispersion strengthened (ODS) steels during heat treatment after cold tube forming are studied via in situ synchrotron X-ray diffraction analysis. The initial textures of cold-formed ODS steel tubes present a well-known α-fiber ( //RD). During high-temperature heat treatment, this initial sharp fiber texture, inherited from cold forming, is transformed by the phase transition to austenite into a weak fiber. During cooling, a texture memory effect is observed with a strong dependency of the fiber intensity on the cooling rate. After quenching into martensite, the fiber becomes weaker than in the initial ferrite. By contrast, after slow cooling into ferrite, the fiber develops and becomes stronger than initially. For many materials, texture memory effect can be explained by a variant selection phenomenon. Accordingly, experimental results are compared to the double Kurdjumov–Sachs (DKS) model. During heating, a limited texture heritage is exhibited with essentially a Kurdjumov–Sachs (K–S) relation between the two phases. During cooling the DKS relation correctly predicts the texture fiber components. However, the strong enhancement of texture during slow cooling remains not completely explained. A Williamson–Hall analysis of the size and strain evolutions during the heating cycle showed a remarkable stability of the crystallites size which is the same in ferrite, austenite and martensite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Yvon P, Carre F (2009) Structural materials challenges for advanced reactor systems. J Nucl Mater 385:217–22210.1016/j.jnucmat.2008.11.026 ↗
2. Toualbi L, Cayron C, Olier P, Malaplate J, Praud M, Mathon MH, Bossu D (2012) Assessment of a new fabrication route for Fe–9Cr–1W ODS cladding tubes. J Nucl Mater 428:47–5310.1016/j.jnucmat.2011.12.013 ↗
3. Vakhitova E, Sornin D, Barcelo F, François M (2017) Texture evolution in oxide dispersion strengthened (ODS) steel tubes during pilgering process. J Nucl Mater 494:20–2810.1016/j.jnucmat.2017.07.002 ↗
4. Wenk H-R, Bortolotti M, Barton N, Oliver E, Brown D (2007) Dauphiné twinning and texture memory in polycrystalline quartz. Phys Chem Miner 34:599–60710.1007/s00269-007-0174-6 ↗
5. Bhattacharyya D, Viswanathan GB, Vogel SC, Williams DJ, Venkatesh V, Fraser HL (2006) A study of the mechanism of α to β phase transformation by tracking texture evolution with temperature in Ti–6Al–4V using neutron diffraction. Scr Mater 54:231–23610.1016/j.scriptamat.2005.09.026 ↗
6. Romero J, Preuss M, Quinta da Fonseca J (2009) Texture memory and variant selection during phase transformation of a zirconium alloy. Acta Mater 57:5501–551110.1016/j.actamat.2009.07.046 ↗
7. Tomida T, Wakita M, Yasuyama M, Sugaya S, Tomota Y, Vogel SC (2013) Memory effects of transformation textures in steel and its prediction by the double Kurdjumov–Sachs relation. Acta Mater 61:2828–283910.1016/j.actamat.2013.01.015 ↗
8. Tomida T, Wakita M, Vogel S, Sandim HRZ (2015) Quantitative prediction of transformation texture in steel by Double Kurdjumov-Sachs relation. In: IOP conference series: materials science and engineering, vol 82, p 01206010.1088/1757-899X/82/1/012060 ↗
9. Tanaka Y, Tomida T, Mohles V (2015) Quantitative prediction of deformed austenite and transformed ferrite texture in hot-rolled steel sheet. In: IOP Conference series: materials science and engineering, vol 82, p 01205710.1088/1757-899X/82/1/012057 ↗
10. Wenk H-R, Huensche I, Kestens L (2007) In-situ observation of texture changes during phase transformations in ultra-low-carbon steel. Metall Mater Trans A 38:261–26710.1007/s11661-006-9033-1 ↗
11. Lischewski I, Gottstein G (2011) Nucleation and variant selection during the α–γ–α phase transformation in microalloyed steel. Acta Mater 59:1530–154110.1016/j.actamat.2010.11.017 ↗
12. Tomida T, Wakita M, Yoshida N, Imai N (2008) Quantitative prediction of transformation texture in hot-rolled steel sheets by multiple KS relation. In: Rollett AD (ed) Materials processing and texture. Ceramic transactions series, Chap. 36, pp 325–332. https://doi.org/10.1002/978047044419110.1002/9780470444191 ↗
13. Vakhitova E (2018) Microstructural and micromechanical study of ODS steel tubes transformed by cold pilgering process, PhD thesis. University of Technology of Troyes, France
14. Ashiotis G, Deschildre A, Nawaz Z, Wright JP, Karkoulis D, Picca FE, Kieffer J (2015) The fast azimuthal integration Python library: pyFAI. J Appl Crystallogr 48:510–51910.1107/S1600576715004306 ↗
15. Knudsen EB, Sorensen HO, Wright JP, Goret G, Kieffer J (2013) FabIO: easy access to two-dimensional X-ray detector images in Python. J Appl Crystallogr 46:537–53910.1107/S0021889813000150 ↗
16. He BB, Preckwinkel U, Smith KL (2000) Fundamentals of two-dimensional X-ray diffraction. Adv X-Ray Anal 43:273–280
17. Ischia G, Wenk H-R, Lutterotti L, Berberich F (2005) Quantitative Rietveld texture analysis of zirconium from single synchrotron diffraction images. J Appl Crystallogr 38:377–38010.1107/S0021889805006059 ↗
18. Bachmann F, Hielscher R, Schaeben H (2010) Texture analysis with MTEX—free and open source software toolbox. Solid State Phenom 160:63–6810.4028/www.scientific.net/SSP.160.63 ↗
19. Bunge HJ (1982) Texture analysis in materials science. Butterworth-Heinemann, London, 614 p
20. Dahms M, Bunge HJ (1989) The iterative series-expansion method for quantitative texture analysis. I. General outline. J Appl Crystallogr 22:439–44710.1107/S0021889889005261 ↗
21. Williamson GK, Hall WH (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metall 1:22–3110.1016/0001-6160(53)90006-6 ↗
22. Ribis J, Bordas E, Trocellier P, Serruys Y, de Carlan Y, Legris A (2015) Comparison of the neutron and ion irradiation response of nano-oxides in oxide dispersion strengthened materials. J Mater Res 30:2210–222110.1557/jmr.2015.183 ↗
23. Loyer-Prost M, Merot JS, Ribis J, Le Bouar Y, Chaffron L, Legendre F (2016) High resolution Transmission Electron Microscopy characterization of a milled oxide dispersion strengthened steel powder. J Nucl Mater 479:76–8410.1016/j.jnucmat.2016.06.050 ↗
24. Hatzoglou C, Radiguet B, Vurpillot F, Pareige P (2018) A chemical composition correction model for nanoclusters observed by APT—application to ODS steel nanoparticles. J Nucl Mater 505:240–24810.1016/j.jnucmat.2018.03.057 ↗
25. Béchade JL, Menut D, Lescoat ML, Sitaud B, Schlutig S, Solari PL, Llorens I, Hermange H, de Carlan Y, Ribis J, Toualbi L (2012) Application of synchrotron radiation to analyze the precipitation in ODS materials before irradiation in Fe–9%Cr single grain of powder and consolidated Fe–18%Cr. J Nucl Mater 428:183–19110.1016/j.jnucmat.2011.08.025 ↗
26. Tomida T (2018) Variant selection mechanism by elastic anisotropy and double K–S relation for transformation texture in steel; difference between martensite and ferrite. Acta Mater 146:25–4110.1016/j.actamat.2017.12.033 ↗
27. Brachet J-C (1994) Décomposition isotherme et anisotherme de l’austenite en ferrite dans des aciers de base 9Cr1Mo: aspects cinétiques et microstructuraux. Journal de Physique IV Colloque 4(C3):83–91
28. Fournier B (2007) Fatigue-fluage des aciers martensitiques à 9-12%Cr : comportement et endommagement. Mécanique [physics.medph]. École Nationale Supérieure des Mines de Paris, Paris. https://tel.archives-ouvertes.fr/tel-00203753/
29. Dadé M, Malaplate J, Garnier J, De Geuser F, Barcelo F, Wident P, Deschamps A (2017) Influence of microstructural parameters on the mechanical properties of oxide dispersion strengthened Fe–14Cr steels. Acta Mater 127:165–17710.1016/j.actamat.2017.01.026 ↗
30. Hutchinson B, Kestens LAI (2008) Origins of texture memory in steels. In: Rollett AD (ed) Applications of texture analysis. Ceramic transactions series, Chap. 30. The American Ceramic Society, pp 281–290. https://doi.org/10.1002/978047044421410.1002/9780470444214 ↗
31. Yamamoto M, Ukai S, Hayashi S, Kaito T, Ohtsuka S (2011) Reverse phase transformation from α to γ in 9Cr-ODS ferritic steels. J Nucl Mater 417:237–24010.1016/j.jnucmat.2010.12.250 ↗
32. Yamamoto M, Ukai S, Hayashi S, Kaito T, Ohtsuka S (2010) Formation of residual ferrite in 9Cr-ODS ferritic steels. Mater Sci Eng A 527:4418–442310.1016/j.msea.2010.03.079 ↗
33. Hutchinson WB, Ryde L, Bate PS (2005) Transformation textures in steels. Mater Sci Forum 495–497:1141–115010.4028/www.scientific.net/MSF.495-497.1141 ↗