Limit load and failure mechanisms of soda lime glass foam
Source abstract
Abstract
Foamed glass is widely used in the industry as an insulating material. However, its mechanical properties are not well-investigated yet. Foamed glass is produced from glass waste that causes discrepancy in mechanical properties of the final product. This paper shows a way to increase the limit of the load capacity of foamed glass, which is very fragile and sensitive to mechanical and thermal loading conditions. In this paper, three different methods of load application on cellular glass structure (rough contact, resin and flour interfaces) and their influence on failure mechanisms were investigated in detail. The results of numerical analyses, based on finite elements method and compression strength tests using the digital image correlation method, indicate that the overall strength of the material is limited by boundary effects. A careful adjustment of the interface property is the main factor to draw useful conclusions and to extend load limits of cellular glass in engineering applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Macfarlane A, Martin G (2004) A world of glass. Science 305(5689):1407–1408. https://doi.org/10.1126/science.109359710.1126/science.1093597 ↗
2. Smolenski CP (1984) Cellular glass foams. J Cell Plast 20(3):210–21410.1177/0021955X8402000304 ↗
3. Morgan JS, Wood JL, Bradt RC (1981) Cell size effects on the strength of foamed glass. Mater Sci Eng 47(1):37–42. https://doi.org/10.1016/0025-5416(81)90038-010.1016/0025-5416(81)90038-0 ↗
4. Rawlings RD, Wu J, Boccaccini A (2006) Glass-ceramics: their production from wastes—a review. J Mater Sci 41(3):733–761. https://doi.org/10.1007/s10853-006-6554-310.1007/s10853-006-6554-3 ↗
5. Shelby JE (2005) Introduction to glass science and technology. Royal Society of Chemistry, London10.1039/9781847551160 ↗
6. NSG-Group (2013) Pilkington. https://www.pilkington.com/resources/ats129propertiesofglass20130114.pdf
7. Engineers NBC (2005) The complete book on glass and ceramics technology. Asian Pacific Business Press, New Delhi
8. Bai J, Yang X, Xu S, Jing W, Yang J (2014) Preparation of foam glass from waste glass and fly ash. Mater Lett. https://doi.org/10.1016/j.matlet.2014.07.02810.1016/j.matlet.2014.07.028 ↗
9. Guo H, Gong Y, Gao S (2010) Preparation of high strength foam glass–ceramics from waste cathode ray tube. Mater Lett 64(8):997–999. https://doi.org/10.1016/j.matlet.2010.02.00610.1016/j.matlet.2010.02.006 ↗
10. Attila Y, Güden M, Taşdemirci A (2013) Foam glass processing using a polishing glass powder residue. Ceram Int 39(5):5869–5877. https://doi.org/10.1016/j.ceramint.2012.12.10410.1016/j.ceramint.2012.12.104 ↗
11. Chen X, Lu A, Qu G (2013) Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent. Ceram Int 39(2):1923–1929. https://doi.org/10.1016/j.ceramint.2012.08.04210.1016/j.ceramint.2012.08.042 ↗
12. Gupta N, Woldesenbet E, Sankaran S (2001) Studies on compressive failure features in syntactic foam material. J Mater Sci 36(18):4485–4491. https://doi.org/10.1023/A:101798682060310.1023/A:1017986820603 ↗
13. Koopman M, Chawla K, Carlisle K, Gladysz G (2006) Microstructural failure modes in three-phase glass syntactic foams. J Mater Sci 41(13):4009–4014. https://doi.org/10.1007/s10853-006-7601-910.1007/s10853-006-7601-9 ↗
14. Gupta N, Woldesenbet E (2002) Compressive fracture features of syntactic foams-microscopic examination. J Mater Sci 37(15):3199–3209. https://doi.org/10.1023/A:101616652984110.1023/A:1016166529841 ↗
15. Song YH, Tane M, Nakajima H (2012) Dynamic and quasi-static compression of porous carbon steel S30C and S45C with directional pores. Mater Sci Eng, A. https://doi.org/10.1016/j.msea.2011.11.09910.1016/j.msea.2011.11.099 ↗
16. Bielawski R, Kowalik M, Suprynowicz K, Rządkowski W, Pyrzanowski P (2017) Experimental study on the riveted joints in glass fibre reinforced plastics (GFRP). Arch Mech Eng 64(3):301–313. https://doi.org/10.1515/meceng-2017-001810.1515/meceng-2017-0018 ↗
17. Bielawski R, Kowalik M, Suprynowicz K, Pyrzanowski P (2016) Solid state phenomena. Trans Tech Publ, Zürich
18. Malesa M, Malowany K, Pawlicki J et al (2016) Non-destructive testing of industrial structures with the use of multi-camera Digital Image Correlation method. Eng Fail Anal. https://doi.org/10.1016/j.engfailanal.2016.02.00210.1016/j.engfailanal.2016.02.002 ↗
19. Gabbrielli R (2009) A new counter-example to Kelvin’s conjecture on minimal surfaces. Philos Mag Lett 89(8):483–491. https://doi.org/10.1080/0950083090302265110.1080/09500830903022651 ↗
20. Thomson WS (1887) On the division of space with minimum partitional area. Acta Math 11(1–4):121–13410.1007/BF02612322 ↗
21. Gibson LJ, Ashby MF (1997) Cellular solids: structure and properties. Cambridge University Press, Cambridge10.1017/CBO9781139878326 ↗
22. Pawlicki J, Koza E, Zurawski P, Leonowicz M (2003) International conference advanced metallic materials. Smolenice, Slovakia
23. OwensCorning (2013) OwensCorning. https://int.foamglas.com/en-gb/products/product-overview/foamglas-boards/foamglas-floor-board-s3