journal article·2018-10Open access

Nanocrystalline non-equilibrium alloys of molybdenum with sodium

Beate Bergk, Uwe Mühle, Bernd Kieback

Journal of Materials Science· Volume 53· Issue 19

Abstract

We present an experimental investigation of the immiscible alloy system Mo–Na with different Na concentrations between 1 and 8 at.%. These non-equilibrium alloys were created by mechanical alloying utilizing high-energy ball milling for up to 75 h. The different microstructures, particle-size distributions, and Na contents of the as-milled powder have been studied using transmission electron microscopy and scanning electron microscopy combined with energy-dispersive X-ray analysis. The maximum Na concentration incorporated into the Mo–Na alloy is identified to be 2 at.%. In addition, the thermal stability of the alloy was examined by analyzing the Na content after annealing at different temperatures and annealing times. While after milling with 1 at.% Na, the establishment of a solid solution was proved previously, the formation of a solid solution is limited to about 1.2 at.% if more Na is used. The residual incorporated Na is segregated at pores, defects, and grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced Materials Characterization Techniques · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Ma E (2005) Alloys created between immiscible elements. Prog Mater Sci 50:413–50910.1016/j.pmatsci.2004.07.001 ↗
2. Aguilara C, Martiınez C, Naveac L (2009) Thermodynamic analysis of the change of solid solubility in a binary system processed mechanical alloying. J Alloys Compd 471:336–34010.1016/j.jallcom.2008.03.083 ↗
3. Aguilara C, Castro F, Martínez C, Guzmán D, de las Cuevas F, Lozadal B, Vielma N (2012) Structural study of nanocrystalline solid solution of Cu–Mo obtained by mechanical alloying. Mater Sci Eng A 548:189–19410.1016/j.msea.2012.03.105 ↗
4. Botcharova E, Heilmaier M, Freudenberger J, Drewa G, Kudashow D, Martin B, Martin U, Schultz L (2003) Supersaturated solid solution of niobium in copper by mechanical alloying. J Alloys Compd 351:119–12510.1016/S0925-8388(02)01025-3 ↗
5. Lei R, Wang M, Wang H, Xu S (2016) New insights on the formation of supersaturated Cu–Nb solid solution. Mater Charact 118:324–33110.1016/j.matchar.2016.06.013 ↗
6. Musu E, Mura G, Ligios G (2013) Formation of metastable solid solutions by mechanical alloying of immiscible Ag and Bi. J Alloys Compd 576:80–8510.1016/j.jallcom.2013.04.124 ↗
7. Liang G, Schulz R (2003) Synthesis of Mg–Ti alloy by mechanical alloying. J Mater Sci 38:1179–1184. https://doi.org/10.1023/A:102288910036010.1023/A:1022889100360 ↗
8. Zhou E, Suryanarayana C, Froes FH (1995) Effect of premilling elemental powders on solid solubility extension of magnesium in titanium by mechanical alloying. Mater Lett 23:27–3110.1016/0167-577X(95)00009-7 ↗
9. Suryanarayana C, Liu J (2012) Processing and characterization of mechanically alloyed immiscible metals. Int J Mater Res 103:1125–112910.3139/146.110781 ↗
10. Suryanarayana C (2001) Mechanical alloying and milling. Progr Mater Sci 46:1–18410.1016/S0079-6425(99)00010-9 ↗
11. Ranganathan S, Murty BS (1998) Novel materials synthesis by mechanical alloying/milling. Int Mater Rev 43:101–14110.1179/imr.1998.43.3.101 ↗
12. Badmos AY, Bhadeshia HD (1997) The evolution of solutions: a thermodynamic analysis of mechanical alloying. Metall Mater Trans A 28a:218910.1007/s11661-997-0176-5 ↗
13. Raabe D, Ohsaki S, Hono K (2009) Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography. Acta Mater 57:5254–526310.1016/j.actamat.2009.07.028 ↗
14. Ashkenazy Y, Vo NQ, Schwenk D, Averback RS, Bellon P (2012) Shear induced chemical mixing in heterogeneous systems. Acta Mater 60:984–99310.1016/j.actamat.2011.11.014 ↗
15. Guo W, Jägle EA, Cho P-P, Yao J, Kostka A, Schneider JM, Raabe D (2014) Shear-induced mixing governs code formation of crystalline–amorphous nanolaminates. Phys Rev Lett 113:03550110.1103/PhysRevLett.113.035501 ↗
16. Bergk B, Mühle U, Povstugar I, Kountá N, Holec D, Clemens H, Kieback B (2018) Non-equilibrium solid solution of molybdenum and sodium: atomic scale experimental and first principles studies. Acta Mater 144:700–70610.1016/j.actamat.2017.11.006 ↗
17. Massalaki TB (1990) Binary alloy phase diagrams. ASM International, Ohio
18. Kehrel A, Keinonen J, Haussalo P, Lieb KP, Uhrmacher M (1991) Hydrogen trapping at radiation defects in sodium-implanted iron, nickel and molybdenum. Radiat Defects Solids 118:297–30710.1080/10420159108220757 ↗
19. Uhrmacher M, Lieb KP (1992) Sodium diffusion in metals observed by the 23Na(p, y) reaction. Nucl Instrum Methods Phys Res B68:175–17910.1016/0168-583X(92)96073-8 ↗
20. Giannuzzi LA, Kempshall BW, Anderson SD, Prenitzer BI (2002) FIB lift-out for defect analysis. Microelectron Fail Anal Desk Ref ASM Int 1:29–35
21. Pennycook SJ, Nellist PD (2011) Scanning transmission electron microscopy. Springer, New York10.1007/978-1-4419-7200-2 ↗
22. Fecht H-J (1995) Nanostructure formation by mechanical attrition. NanoStruct Mater 6:33–4210.1016/0965-9773(95)00027-5 ↗
23. Eckert J, Holzer JC, Krill JC, Johnson WL (1993) Mechanically driven alloying grain size changes in nanocrystalline Fe–Cu powders. J Appl Phys 73:279410.1063/1.353055 ↗
24. Eckert J (1995) Relationships governing the grain size of nanocrystalline metals and alloys. NanoStruct Mater 6:413–41610.1016/0965-9773(95)00084-4 ↗
25. Khoshkhoo MS, Scudino S, Bednarcik J, Kauffmann A, Bahmanpour H, Freudenberger J, Scattergood R, Zehetbauer MJ, Koch CC, Eckert J (2014) Mechanism of nanostructure formation in ball-milled Cu and Cu-3 wt% Zn studied by X-ray diffraction line profile analysis. J Alloys Compd 588:138–14310.1016/j.jallcom.2013.10.252 ↗
26. Salimon AI, Korsunsky AM, Ivanov AN (1999) The character of dislocation structure evolution in nanocrystalline FCC Ni–Co alloys prepared by high-energy mechanical milling. Mater Sci Eng A 271:196–20510.1016/S0921-5093(99)00205-1 ↗
27. Hall EO (1951) The deformation and ageing of mild steel III discussion of results. Proc Phys Soc Sect B 64:747–75310.1088/0370-1301/64/9/303 ↗
28. Petch NJ (1953) The cleavage strength of polycrystals. J Iron Steel Inst 174:25–28
29. Trapp J, Kieback B (2013) Solid-state reactions during high-energy milling of mixed powders. Acta Mater 61:310–32010.1016/j.actamat.2012.09.061 ↗
30. Shaw L, Zawrah M, Villegas J, Luo H, Miracle D (2003) Effects of process-control agents on mechanical alloying of nanostructured aluminium alloys. Metall Mater Trans A 34A:15910.1007/s11661-003-0217-7 ↗
31. Sheibani S, Heshmati-Manesh S, Ataie A (2010) Structural investigation on nano-crystalline Cu–Cr supersaturated solid solution prepared by mechanical alloying. J Alloys Compd 495:59–6210.1016/j.jallcom.2010.02.034 ↗
32. Humphry-Baker SA, Garroni S, Delogu F, Schuh CA (2016) Melt-driven mechanochemical phase transformations in moderately exothermic powder mixtures. Nat Mater 16:128010.1038/nmat4732 ↗
33. Guttmann V (1970) Keimbildung bei der Rekristallisation von Molybdän. J Less-Common Met 21:51–6110.1016/0022-5088(70)90164-5 ↗
34. Mehrer H (2007) Diffusion in solids. Springer, Berlin10.1007/978-3-540-71488-0 ↗