journal article·2021-12Open access

Pulsed electric current joining of oxide-dispersion-strengthened austenitic steels

Fei Wang, Xueliang Yan, Xin Chen, Nathan Snyder, Michael Nastasi, Khalid Hattar, Bai Cui

Journal of Materials Science· Volume 56· Issue 34

Abstract

The solid-state joining of oxide-dispersion-strengthened (ODS) austenitic steels was achieved using a pulsed electric current joining (PECJ) process. Microstructures of the austenitic grain structures and oxide dispersions in the joint areas were characterized using electron microscopy. Negligible grain growth was observed in austenitic grain structures, while slight coarsening of oxide dispersions occurred at a short holding time. The mechanisms of the PECJ process may involve three steps that occur simultaneously, including the sintering of mechanical alloying powders in the bonding layer, formation of oxide dispersions, and bonding of the mechanical alloying powders with the base alloy. The high hardness and irradiation resistance of ODS alloys were retained in the joint areas. This research revealed the fundamental mechanisms during the PECJ process, which is beneficial for its potential applications during the advanced manufacturing of ODS alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Chen W-Y, Miao Y, Wu Y et al (2015) Atom probe study of irradiation-enhanced α′ precipitation in neutron-irradiated Fe–Cr model alloys. J Nucl Mater 462:242–24910.1016/j.jnucmat.2015.04.005 ↗
2. Miao Y, Mo K, Zhou Z et al (2016) Size-dependent characteristics of ultra-fine oxygen-enriched nanoparticles in austenitic steels. J Nucl Mater 480:195–20110.1016/j.jnucmat.2016.08.014 ↗
3. Yan X, Zhang X, Wang F et al (2019) Fabrication of ODS austenitic steels and CoCrFeNi high-entropy alloys by spark plasma sintering for nuclear energy applications. JOM 71:2856–286710.1007/s11837-019-03531-7 ↗
4. Zinkle SJ, Boutard JL, Hoelzer DT et al (2017) Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications. Nucl Fusion 57:09200510.1088/1741-4326/57/9/092005 ↗
5. Aydogan E, Maloy SA, Anderoglu O et al (2017) Effect of tube processing methods on microstructure, mechanical properties and irradiation response of 14YWT nanostructured ferritic alloys. Acta Mater 134:116–12710.1016/j.actamat.2017.05.053 ↗
6. Stan T, Wu Y, Ciston J et al (2020) Characterization of polyhedral nano-oxides and helium bubbles in an annealed nanostructured ferritic alloy. Acta Mater 183:484–49210.1016/j.actamat.2019.10.045 ↗
7. Hoelzer DT, Massey CP, Zinkle SJ et al (2020) Modern nanostructured ferritic alloys: A compelling and viable choice for sodium fast reactor fuel cladding applications. J Nucl Mater 529:15192810.1016/j.jnucmat.2019.151928 ↗
8. Alam ME, Pal S, Maloy SA, Odette GR (2017) On delamination toughening of a 14YWT nanostructured ferritic alloy. Acta Mater 136:61–73. https://doi.org/10.1016/j.actamat.2017.06.04110.1016/j.actamat.2017.06.041 ↗
9. Miao Y, Mo K, Zhou Z et al (2015) On the microstructure and strengthening mechanism in oxide dispersion-strengthened 316 steel: A coordinated electron microscopy, atom probe tomography and in situ synchrotron tensile investigation. Mater Sci Eng A 639:585–59610.1016/j.msea.2015.05.064 ↗
10. Miao Y, Mo K, Cui B et al (2015) The interfacial orientation relationship of oxide nanoparticles in a hafnium-containing oxide dispersion-strengthened austenitic stainless steel. Mater Charact 101:136–14310.1016/j.matchar.2015.01.015 ↗
11. Gräning T, Rieth M, Hoffmann J, Möslang A (2017) Production, microstructure and mechanical properties of two different austenitic ODS steels. J Nucl Mater 487:348–36110.1016/j.jnucmat.2017.02.034 ↗
12. Yan X, Wang F, Deng L et al (2018) Effect of laser shock peening on the microstructures and properties of oxide-dispersion-strengthened austenitic steels. Adv Eng Mater 20:170064110.1002/adem.201700641 ↗
13. Oka H, Watanabe M, Hashimoto N et al (2013) Morphology of oxide particles in ODS austenitic stainless steel. J Nucl Mater 442:S164–S16810.1016/j.jnucmat.2013.04.073 ↗
14. Oka H, Watanabe M, Kinoshita H et al (2011) In situ observation of damage structure in ODS austenitic steel during electron irradiation. J Nucl Mater 417:279–28210.1016/j.jnucmat.2010.12.156 ↗
15. Leo JRO, Barroso SP, Fitzpatrick ME et al (2019) Microstructure, tensile and creep properties of an austenitic ODS 316L steel. Mater Sci Eng A 749:158–16510.1016/j.msea.2019.02.014 ↗
16. Yan X, Wang F, Hattar K et al (2019) Novel amorphous SiOC dispersion-strengthened austenitic steels. Materialia 6:10034510.1016/j.mtla.2019.100345 ↗
17. Odette GR, Alinger MJ, Wirth BD (2008) Recent developments in irradiation-resistant steels. Annu Rev Mater Res 38:471–503. https://doi.org/10.1146/annurev.matsci.38.060407.13031510.1146/annurev.matsci.38.060407.130315 ↗
18. Wright IG, Tatlock GJ, Badairy H, Chen CL (2009) Summary of prior work on joining of oxide dispersion-strengthened alloys. Oak Ridge National Laboratory10.2172/969976 ↗
19. Cvecek K, Dehmel S, Miyamoto I, Schmidt M (2019) A review on glass welding by ultra-short laser pulses. Int J Extreme Manuf 1:042001. https://doi.org/10.1088/2631-7990/ab55f610.1088/2631-7990/ab55f6 ↗
20. Molian PA, Yang YM, Patnaik PC (1992) Laser welding of oxide dispersion-strengthened alloy MA754. J Mater Sci 27:2687–269410.1007/BF00540691 ↗
21. McKimpson MG, O’Donnell D (1994) Joining ODS materials for high-temperature applications. JOM 46:49–5110.1007/BF03220748 ↗
22. Kasuga M, Sano T, Hirose A (2019) Grain refining in weld metal using short-pulsed laser ablation during CW laser welding of 2024–T3 aluminum alloy. Int J Extreme Manuf 1:045003. https://doi.org/10.1088/2631-7990/ab563a10.1088/2631-7990/ab563a ↗
23. Baker BW, Brewer LN (2014) Joining of oxide dispersion strengthened steels for advanced reactors. Jom 66:2442–2457https://doi.org/10.1007/s40553-015-0054-910.1007/s11837-014-1206-6 ↗
24. Mathon MH, Klosek V, De Carlan Y, Forest L (2009) Study of PM2000 microstructure evolution following FSW process. J Nucl Mater 386:475–47810.1016/j.jnucmat.2008.12.163 ↗
25. Legendre F, Poissonnet S, Bonnaillie P et al (2009) Some microstructural characterisations in a friction stir welded oxide dispersion strengthened ferritic steel alloy. J Nucl Mater 386:537–53910.1016/j.jnucmat.2008.12.170 ↗
26. Lear CR, Eftink BP, Lienert TJ, Maloy SA (2019) Capacitive discharge resistance welding for ODS steel cladding: Weld properties and radiation resistance. Los Alamos National Lab.(LANL), Los Alamos, NM (United States)
27. Nishimoto K, Saida K, Tsuduki R (2004) In situ sintering bonding of oxide dispersion strengthened superalloys using pulsed electric current sintering technique. Sci Technol Weld Join 9:493–50010.1179/136217104225021751 ↗
28. Tatlock GJ, Dyadko EG, Dryepondt SN, Wright IG (2007) Pulsed plasma-assisted diffusion bonding of oxide dispersion-strengthened–FeCrAl alloys. Metall Mater Trans A 38:1663–166510.1007/s11661-007-9233-3 ↗
29. Fu H, Nagasaka T, Muroga T et al (2015) Weldability of 9Cr-ODS and JLF-1 steels for dissimilar joining with hot isostatic pressing and electron beam welding. Plasma Fusion Res 10:3405015–3405015. https://doi.org/10.1585/pfr.10.340501510.1585/pfr.10.3405015 ↗
30. Hattar K, Bufford DC, Buller DL (2014) Concurrent in situ ion irradiation transmission electron microscope. Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At 338:56–6510.1016/j.nimb.2014.08.002 ↗
31. Stoller RE, Toloczko MB, Was GS et al (2013) On the use of SRIM for computing radiation damage exposure. Nucl Instrum Methods Phys Res Sect B Beam Interact Mater At 310:75–8010.1016/j.nimb.2013.05.008 ↗
32. Jiang S, Horn TJ, Dhir VK (2000) Numerical analysis of a radiant heat flux calibration system. Int J Thermophys 21:941–963. https://doi.org/10.1023/A:100662252657810.1023/A:1006622526578 ↗
33. Wang F, Zhou Q, Li X-Z et al (2021) Electron microscopy observation of electric field-assisted sintering of stainless steel nanoparticles. J Mater Sci 56:2584–2596. https://doi.org/10.1007/s10853-020-05348-110.1007/s10853-020-05348-1 ↗
34. Munir ZA, Anselmi-Tamburini U, Ohyanagi M (2006) The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method. J Mater Sci 41:763–777https://doi.org/10.1007/s10853-020-05040-410.1007/s10853-006-6555-2 ↗
35. Munir ZA, Quach DV, Ohyanagi M (2011) Electric current activation of sintering: a review of the pulsed electric current sintering process. J Am Ceram Soc 94:1–1910.1111/j.1551-2916.2010.04210.x ↗
36. Orru R, Licheri R, Locci AM et al (2009) Consolidation/synthesis of materials by electric current activated/assisted sintering. Mater Sci Eng R Rep 63:127–28710.1016/j.mser.2008.09.003 ↗
37. Marder R, Estournès C, Chevallier G, Chaim R (2014) Plasma in spark plasma sintering of ceramic particle compacts. Scr Mater 82:57–6010.1016/j.scriptamat.2014.03.023 ↗
38. Zhang Z-H, Liu Z-F, Lu J-F et al (2014) The sintering mechanism in spark plasma sintering–proof of the occurrence of spark discharge. Scr Mater 81:56–5910.1016/j.scriptamat.2014.03.011 ↗
39. Hulbert DM, Anders A, Andersson J et al (2009) A discussion on the absence of plasma in spark plasma sintering. Scr Mater 60:835–83810.1016/j.scriptamat.2008.12.059 ↗
40. Makino Y, Sakaguchi M, Terada J, Akamatsu K (2007) Consolidation of Ultrafine Alumina Powders with Sps Method. 54:219–225. https://doi.org/10.2497/jjspm.54.21910.2497/jjspm.54.219 ↗
41. Zhang X, Khedmati M, Kim Y-R et al (2020) Microstructure evolution during spark plasma sintering of FJS-1 lunar soil simulant. J Am Ceram Soc 103:899–91110.1111/jace.16808 ↗
42. Williams CA, Unifantowicz P, Baluc N et al (2013) The formation and evolution of oxide particles in oxide-dispersion-strengthened ferritic steels during processing. Acta Mater 61:2219–2235. https://doi.org/10.1016/j.actamat.2012.12.04210.1016/j.actamat.2012.12.042 ↗
43. Brocq M, Radiguet B, Poissonnet S et al (2011) Nanoscale characterization and formation mechanism of nanoclusters in an ODS steel elaborated by reactive-inspired ball-milling and annealing. J Nucl Mater 409:80–8510.1016/j.jnucmat.2010.09.011 ↗
44. Yamashita S, Ohtsuka S, Akasaka N et al (2004) Formation of nanoscale complex oxide particles in mechanically alloyed ferritic steel. Philos Mag Lett 84:525–52910.1080/09500830412331303609 ↗
45. Hsiung LL, Fluss MJ, Tumey SJ et al (2010) Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance. Phys Rev B 82:18410310.1103/PhysRevB.82.184103 ↗
46. Heersche HB, Lientschnig G, O’Neill K et al (2007) In situ imaging of electromigration-induced nanogap formation by transmission electron microscopy. Appl Phys Lett 91:07210710.1063/1.2767149 ↗
47. Bertolino N, Garay J, Anselmi-Tamburini U, Munir ZA (2001) Electromigration effects in Al-Au multilayers. Scr Mater 44:737–74210.1016/S1359-6462(00)00669-2 ↗
48. Bertolino N, Garay J, Anselmi-Tamburini U, Munir ZA (2002) High-flux current effects in interfacial reactions in Au–Al multilayers. Philos Mag B 82:969–985
49. Oka K, Ohnuki S, Yamashita S et al (2007) Structure of nano-size oxides in ODS steels and its stability under electron irradiation. Mater Trans 48:2563–256610.2320/matertrans.MD200715 ↗