Effect of sintering temperature on water-purification performance of Al2O3/3Y-ZrO2 membrane filters
Source abstract
Abstract
Ceramic filters can be adapted to various liquids even under adverse conditions. Al2O3-based composites dispersed with 3 mol%-Y2O3-doped ZrO2 (3Y-ZrO2), or Al2O3/3Y-ZrO2, are well-known as extremely strong oxide-based ceramics. In this study, we have focused on the Al2O3/20 wt.% 3Y-ZrO2 composites as ceramic water filters. Disk-shape Al2O3/3Y-ZrO2 filters with different pore structures were prepared by pressureless sintering at 1200–1500 °C in air. The pore-size distribution of the filters was analyzed by mercury porosimetry. Some filtration properties, such as turbidity, were evaluated, and the Herman and Bredee's filtration models were discussed. Among the filters sintered at different temperatures, the Al2O3/3Y-ZrO2 filter sintered at 1300 °C showed the best performance due to the lack of large pores of > ~ 2 µm. The average pore diameter of the A8Z2-1300 sample was 64 nm, the pore volume was 0.157 cm3/g, and the open porosity was 40.2%. SEM observations confirmed the change of the cake-layer thickness after the filtrations, i.e., ~ 27, ~ 17, ~ 15 and ~ 2 µm for the A8Z2-1200, 1300, 1400 and 1500 samples, respectively, which revealed that the actual filtration in this study was the combination of (i) the standard blocking with the larger pores at the initial stage and (ii) the cake-filtration with the smaller pores at the middle and late stages.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Membrane Separation Technologies · Solar-Powered Water Purification Methods · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Luo Y, Guo W, Ngo HH, Nghiem LD, Hai FI, Zhang J, Liang S, Wang XC (2014) A review on the occurrence of micropollutants in the aquatic environment and their fate and removal during wastewater treatment. Sci Total Environ 473–474: 619–641.10.1016/j.scitotenv.2013.12.065 ↗
2. Muhammad N, Sinha R, Krishnan ER, Patterson CL (2009) Ceramic filter for small system drinking water treatment: evaluation of membrane pore size and importance of integrity monitoring. J Environ Eng 135: 1181–1191.10.1061/(ASCE)EE.1943-7870.0000084 ↗
3. Choi HJ, Kim JU, Kim HS, Kim SH, Lee MH (2015) Effect of sintering temperature in preparation of granular ceramic filter. Ceram Int 41:.10030–10037.10.1016/j.ceramint.2015.04.090 ↗
4. Ulbricht M (2006) Advanced functional polymer membranes. Polymer 47: 2217–2262.10.1016/j.polymer.2006.01.084 ↗
5. Zearley TL, Summers RS (2012) Removal of trace organic micropollutants by drinking water biological filters. Environ Sci Technol 46: 9412–9419.10.1021/es301428e ↗
6. Kamato Y, Suzuki Y (2019) Reactive synthesis of porous MgAl2O4 membranes on a macroporous Al2O3-based ceramic tube toward cross-flow ultrafiltration. J Ceram Soc Jpn 127: 267–271.10.2109/jcersj2.18202 ↗
7. Hono T, Inoue N, Morimoto M, Suzuki Y (2013) Reactive sintering and microstructure of uniform, openly-porous Al2TiO5. J Asian Ceram Soc 1: 178–183.10.1016/j.jascer.2013.05.004 ↗
8. Nakagoshi Y, Suzuki Y (2015) Pseudobrookite-type MgTi2O5 water-purification filter with controlled particle morphology, J Asian Ceram Soc 3 (3): 334–338.10.1016/j.jascer.2015.06.005 ↗
9. Fukui K, Suzuki Y (2018) Reactive sintering and particle morphology control of -alumina based water-purification filters, J Mater Sci 53 (2): 1005–1013. https://doi.org/10.1007/s10853-017-1599-z.10.1007/s10853-017-1599-z ↗
10. Kamato Y, Suzuki Y (2017) Reactively sintered porous MgAl2O4 for water-purification filter with controlled particle morphology. Ceram Int 43:14090–14095.10.1016/j.ceramint.2017.07.145 ↗
11. Wang J, Stevens R (1989) Zirconia-toughened alumina (ZTA) ceramics. J Mater Sci 24: 3421–3440. https://doi.org/10.1007/BF02385721.10.1007/BF02385721 ↗
12. Arab A, Ahmad ZA, Ahmad R (2015) Effects of yttria stabilized zirconia (3Y-TZP) percentages on the ZTA dynamic mechanical properties. Int J Refract Met Hard Mat 50: 157–162.10.1016/j.ijrmhm.2015.01.005 ↗
13. Hadzley AB, Norfauzi T, Umar UAA, Afuza AA, Faiz MM, Naim MF (2019) Effect of sintering temperature on density, hardness and tool wear for alumina-zirconia cutting tool. J Mech Eng Sci 13: 4648–4660.10.15282/jmes.13.1.2019.21.0391 ↗
14. Chen J, Xie Z, Zeng W, Wu W (2017) Toughening mechanisms of ZTA ceramics at cryogenic temperature (77 K). Ceram Int 43: 3970–3974.10.1016/j.ceramint.2016.11.072 ↗
15. Casellas D, Nagl MM, Llanes L, Anglada M (2003) Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects. J Mater Proc Tech 143–144: 148–152.10.1016/S0924-0136(03)00396-0 ↗
16. Exare C, Kiat JM, Guiblin N, Porcher F, Petricek V (2015) Structural evolution of ZTA composites during synthesis and processing. J Eur Ceram Soc 35: 1273–1283.10.1016/j.jeurceramsoc.2014.10.031 ↗
17. Naga SM, Awaad M, Bondioli F, Fino P, Hassan AM (2017) Thermal diffusivity of ZTA composites with different YSZ quantity. J Alloy Compd 695: 1859–1862.10.1016/j.jallcom.2016.11.019 ↗
18. Morozova LV, Kaalinina MV, Khamova TV, Vasil’eva EA, Shilova OA, (2016) Porous ceramics based on the ZrO2(Y2O3)-Al2O3 system for filtration membranes. Glass Phys Chem 42: 408–413.10.1134/S1087659616040106 ↗
19. Herman PH, Bredée HL (1936) Principles of the mathematical treatment of constant pressure filtration. J Soc Chem Eng 55T: 1–4.
20. Iritani E, Katagiri N (2016) Development of blocking filtration model in membrane filtration. KONA Powd Partic J 33: 179–202.10.14356/kona.2016024 ↗
21. Sawada S (2006) Membrane filtration technology useful in the field (in Jpn.) Kogyo Chosakai Publishing Co., Ltd. Tokyo Japan
22. Sumiya M (2013) Explanation of occlusion theory and application to filtration results. Pall News 117: 10–15 .((in Jpn.))
23. ICDD-JCPDS PDF no. 46–1212 (α-Al2O3)
24. Tosoh Co. https://www.tosoh.co.jp/zirconia/tz/detail01_01.html (Accessed 19 December 2019)
25. Guo W, Ngo H, Li J (2012) A mini-review on membrane fouling. Bioresource Tech 122: 27–34.10.1016/j.biortech.2012.04.089 ↗