journal article·2018-05

Ultra-high-voltage capacitor based on aluminum electrolytic–electrochemical hybrid electrodes

Youguo Huang, Yahui Zan, Xiaohui Zhang, Hongqiang Wang, Qingyu Li

Journal of Materials Science· Volume 53· Issue 9
Publisher page

Abstract

Low working voltage hinders the wide application of a single electrochemical capacitor, while the rapidly developing industry of electronic components urgently needs a kind of device combining the advantages of high voltage and energy capacity. This work successfully prepared a flexible packaging aluminum electrolytic–electrochemical hybrid capacitor with high working voltage and capacitance, using aluminum electrolytic capacitor anode foil as anode and activated carbon composite electrodes as cathode. The results show that the working voltage reaches 105 V. The single capacitance reaches 580 μF at a current of 100 mA cm−2, which is double than that of the traditional aluminum electrolytic capacitors at the same size. The hybrid capacitor exhibits superior energy storage density and rapid charge–discharge capacity. The gravimetric energy density and volume energy density for the hybrid capacitor is 0.49 J g−1 and 0.62 J cm−3, respectively. It also exhibits excellent cycling performance without obvious capacitance capacity fading. The increase in the energy density of the hybrid capacitor is mainly due to the use of aluminum electrolytic capacitor materials for the anode and the use of electrochemical capacitor material for the cathode, which increases the operating voltage and the specific capacitance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Conducting polymers and applications · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Liu H, Zhao K (2016) Asymmetric flow electrochemical capacitor with high energy densities based on birnessite-type manganese oxide nanosheets and activated carbon slurries. J Mater Sci 51:9306–9313. https://doi.org/10.1007/s10853-016-0177-010.1007/s10853-016-0177-0 ↗
2. Zhao HP, Liu L, Vellacheri R, Lei Y (2017) Recent advances in designing and fabricating self-supported nanoelectrodes for supercapacitors. Adv Sci 4:1700188–170022110.1002/advs.201700188 ↗
3. Xu W, Chen JH, Yu MH, Zeng YX, Long YB, Lu XH, Tong YX (2016) Sulphur-doped Co3O4 nanowires as an advanced negative electrode for high-energy asymmetric supercapacitors. J Mater Chem A 4:10779–1078510.1039/C6TA03153F ↗
4. Tajik S, Dubal DP, Gomez-Romero P, Yadegari A, Rashidi A, Nasernejad B, Inamuddin Asiri AM (2017) Nanostructured mixed transition metal oxides for high performance asymmetric supercapacitors: facile synthetic strategy. Int J Hydrogen Energy 42:12384–1239510.1016/j.ijhydene.2017.03.117 ↗
5. Yu JH, Wu JF, Wang HZ, Zhou AA, Huang CQ, Bai H, Li L (2016) Metallic fabrics as the current collector for high-performance graphene-based flexible solid-state supercapacitor. ACS Appl Mater Interfaces 8:4724–472910.1021/acsami.5b12180 ↗
6. Ratajczak P, Jurewicz K, Béguin F (2014) Factors contributing to ageing of high voltage carbon/carbon supercapacitors in salt aqueous electrolyte. J Appl Electrochem 44:475–48010.1007/s10800-013-0644-0 ↗
7. Ji SQ, Lu T, Zhao ZM, Yu HL, Yuan LQ (2015) Series-connected HV-IGBTs using active voltage balancing control with status feedback circuit. IEEE Trans Power Deliv 30:4165–417410.1109/TPEL.2014.2360189 ↗
8. Zhang JL, Lee J (2011) A review on prognostics and health monitoring of Li-ion battery. J Power Sources 196:6007–601410.1016/j.jpowsour.2011.03.101 ↗
9. Xu YX, Lin ZY, Zhong X, Huang XQ, Weiss NO, Huang Y, Duan XF (2014) Holey graphene frameworks for highly efficient capacitive energy storage. Nat Commun 5:4554–456110.1038/ncomms5554 ↗
10. Ma S, Nam K, Yoon WS, Yang X, Ahnc KY, Ohd KH, Kim KB (2007) A novel concept of hybrid capacitor based on manganese oxide materials. Electrochem Commun 9:2807–281110.1016/j.elecom.2007.09.015 ↗
11. Khomenko V, Raymundo-Piñero E, Béguin F (2010) A new type of high energy asymmetric capacitor with nanoporous carbon electrodes in aqueous electrolyte. J Power Sources 195:4234–424110.1016/j.jpowsour.2010.01.006 ↗
12. Simon P, Gogotsi Y (2008) Materials for electrochemical capacitors. Nat Mater 7:845–85410.1038/nmat2297 ↗
13. Chang TY, Wang X, Evans DA, Robinson SL, Zheng JP (2002) Tantalum oxide–ruthenium oxide hybrid(R) capacitors. J Power Sources 110:138–14310.1016/S0378-7753(02)00240-9 ↗
14. FreemanY Alapatt GF, Harrell WR, Luzinov I, Lessner P, Qazi J (2013) Anomalous currents in low voltage polymer tantalum capacitors. ECS J Solid State Sci Technol 2:N197–N20410.1149/2.046309jss ↗
15. Choi DH, Baker A, Lanagan M, Trolier-McKinstry S, Randall C (2013) Structural and dielectric properties in (1 − x)BaTiO3–xBi(Mg1/2Ti1/2)O3 ceramics (0.1 ≤ x ≤ 0.5) and potential for high-voltage multilayer capacitors. J Am Ceram Soc 96:2197–220210.1111/jace.12312 ↗
16. Yin JL, Park JY (2015) Asymmetric supercapacitors based on the in situ-grown mesoporous nickel oxide and activated carbon. J Solid State Electrochem 19:2391–239810.1007/s10008-015-2885-9 ↗
17. Zhang LL, Zhao XS (2009) Carbon-based materials as supercapacitor electrodes. Chem Soc Rev 38:2520–253110.1039/b813846j ↗
18. Teo EYL, Muniandy L, Ng EP, Adam F, Mohamed AR, Jose R, Chong KF (2016) High surface area activated carbon from rice husk as a high performance supercapacitor electrode. Electrochim Acta 192:110–11910.1016/j.electacta.2016.01.140 ↗
19. Li B, Dai F, Xiao QF, Yang L, Shen JM, Zhang CM, Cai M (2016) Nitrogen-doped activated carbon for a high energy hybrid supercapacitor. Energy Environ Sci 9:102–10610.1039/C5EE03149D ↗
20. Otowa T, Nojima Y, Miyazaki T (1997) Development of KOH activated high surface area carbon and its application to drinking water purification. Carbon 35:1315–131910.1016/S0008-6223(97)00076-6 ↗
21. Li L, Raji AR, Fei H, Yang Y, Samuel EL, Tour JM (2013) Nanocomposite of Polyaniline Nanorods Grown on Graphene Nanoribbons for Highly Capacitive Pseudocapacitors. ACS Appl Mater Interfaces 5:6622–662710.1021/am4013165 ↗
22. Kankate L, Gratsov A, Kliem H (2015) Nonlinear relaxational polarization in aluminum oxide. IEEE Trans Dielectr Electr Insul 22:1225–123110.1109/TDEI.2015.7076825 ↗
23. Venigalla S, Chodelka R, Adair JH (1998) Preparation and characterization of barium titanate electrolytic capacitors from porous titanium anodes. J Am Ceram Soc 81:2429–244210.1111/j.1151-2916.1998.tb02639.x ↗
24. Li XX, Shen LH, Zhang DD, Qi HG, Gao Q, Ma F, Zhang CX (2008) Electrochemical impedance spectroscopy for study of aptamer–thrombin interfacial interactions. Biosens Bioelectron 23:1624–163010.1016/j.bios.2008.01.029 ↗
25. Yan J, Sun W, Wei T, Zhang Q, Fan ZJ, Wei F (2012) Fabrication and electrochemical performances of hierarchical porous Ni(OH)2 nanoflakes anchored on graphene sheets. J Mater Chem 22:11494–1150210.1039/c2jm30221g ↗
26. Fu DY, Li HW, Zhang XM, Han GY, Zhou HH, Chang YH (2016) Flexible solid-state supercapacitor fabricated by metal-organic framework/graphene oxide hybrid interconnected with PEDOT. Mater Chem Phys 139:166–17310.1016/j.matchemphys.2016.05.024 ↗