journal article·2017-09Open access

Nanofibrillated cellulose in wood coatings: viscoelastic properties of free composite films

Tina Künniger, Franziska Grüneberger, Beatrice Fischer, Christian Walder

Journal of Materials Science· Volume 52· Issue 17

Abstract

Dynamic mechanical analysis (DMA) represents an important method for understanding the mechanical behavior of surface coatings. In this work, transparent composite films of nanofibrillated cellulose (NFC), derived from beech wood pulp, and 10 different commercial polymeric binders, representative binders for wood coatings, were prepared to study the viscoelastic properties of the composite films. DMA in tensile mode was used to determine the glass transition temperature (T g), the storage and loss modulus and the cross-linking and entanglement density before and after accelerated aging. Additionally, Fourier transform infrared spectroscopy (FTIR) was applied to corroborate the findings of the dynamic mechanical analysis. T g, moduli, cross-linking and entanglement density of prepared films depended on the initial properties of the neat polymers. The addition of 2.5 wt% NFC to the polymers had no significant influence on T g and entanglement density, while the reinforcing effect of NFC influenced the moduli of all polymers, as well as the cross-linking density of the alkyds. Accelerated aging by UV radiation at 60 °C strongly affected the viscoelastic properties of neat alkyd polymer and its NFC composite films, while the aging effect was less pronounced for the acrylates. DMA and FTIR findings confirm that unmodified NFC did not adversely change the general aging behavior of the polymers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Wood Treatment and Properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Bulian F, Graystone JA (2009) Wood coatings—theory and practice, 1st edn. Elsevier Science, Amsterdam
2. Nikolic M, Nguyen HD, Daugaard AE, Loef D, Mortensen K, Barsberg S, Sanadi AR (2016) Influence of surface modified nano silica on alkyd binder before and after accelerated weathering. Polym Degrad Stab 126:134–14310.1016/j.polymdegradstab.2016.02.006 ↗
3. Menczel JD, Prime RB (2009) Thermal analysis of polymers. Wiley, New York10.1002/9780470423837 ↗
4. Schlesing W, Buhk M, Osterhold M (2004) Dynamic mechanical analysis in coatings industry. Prog Org Coat 49:197–20810.1016/j.porgcoat.2003.09.009 ↗
5. Koleske JV (2012) Paint and coating testing manual. ASTM International, West Conshohocken
6. Menard KP (2008) Dynamic mechanical analysis: a practical introduction, 2nd edn. CRC Press, Boca Raton10.1201/9781420053135 ↗
7. Dufresne A (2012) Nanocellulose, from nature to high performance tailored materials. Walter de Gruyter, Berlin10.1515/9783110254600 ↗
8. Lavoine N, Desloges I, Bras J (2014) Microfibrillated cellulose coatings as new release systems for active packaging. Carbohydr Polym 103:528–53710.1016/j.carbpol.2013.12.035 ↗
9. Vardanyan V, Poaty B, Chauve G, Landry V, Galstian T, Riedl B (2014) Mechanical properties of UV-waterborne varnishes reinforced by cellulose nanocrystals. J Coat Technol Res 11:841–85210.1007/s11998-014-9598-3 ↗
10. Grüneberger F, Künniger T, Zimmermann T, Arnold M (2014) Rheology of nanofibrillated cellulose/acrylate systems for coating applications. Cellulose 21:1313–132610.1007/s10570-014-0248-9 ↗
11. Grüneberger F, Künniger T, Zimmermann T, Arnold M (2014) Nanofibrillated cellulose in wood coatings: mechanical properties of free composite films. J Mater Sci 49:6437–6448. doi: 10.1007/s10853-014-8373-210.1007/s10853-014-8373-2 ↗
12. Grüneberger F, Künniger T, Huch A, Zimmermann T (2015) Nanofibrillated cellulose in wood coatings: dispersion and stabilization of ZnO as UV absorber. Prog Org Coat 87:112–12110.1016/j.porgcoat.2015.05.025 ↗
13. Sepe MP (1997) Thermal analysis of polymers. Rapra Review Report No. 95, vol 8, no 11. Repra Technology Ltd, Shrewsbury, p 26
14. Mitra S, Ahire A, Mallik BP (2014) Investigation of accelerated aging behaviour of high performance industrial coatings by dynamic mechanical analysis. Prog Org Coat 77:1816–182510.1016/j.porgcoat.2014.06.002 ↗
15. Whitten PG, Brown HR (2007) Polymer entanglement density and its influence on interfacial friction. Phys Rev E 76:02610110.1103/PhysRevE.76.026101 ↗
16. Sanden MVD, Meijer HEH, Tervoort TA (1992) Deformation and toughness of polymeric systems: 2. Influence of entanglement density. Polymer 34:2961–297010.1016/0032-3861(93)90621-G ↗
17. Baur E, Brinkmann S, Osswald T, Schmachtenberg E (2007) Saechtling Kunststoff Taschenbuch. Carl Hanser Verlag GmbH & Co. KG, Munich10.3139/9783446414372 ↗
18. Hosur M, Chowdhury F, Gebremedhin O, Jeelani S (2008) Recent advances on the effect of nanoclay on the properties of epoxies and fiber reinforced polymer composites. In: Advances in Heterogeneous Material Mechanics 2008 - Proceedings of the 2nd International Conference on Heterogeneous Material Mechanics, ICHMM 2008, pp 159–163
19. Bulian F, Matellon A, Melchior A, Menotti D, Tolazzi M, Spagna A, Tanelli M (2011) Using DMA and UV–Vis spectroscopy to predict the performance of wood coatings in outdoor use. Surf Coat Int 94:177–180
20. Bergamasco D, Bulian F, Melchior A, Menotti D, Tirelli P, Tolazzi M (2011) DMA analysis to predict the performance of waterborne coatings. J Therm Anal Calorim 103:65–6810.1007/s10973-010-1160-7 ↗
21. Nichols M (2002) Anticipating paint cracking: the application of fracture mechanics to the study of paint weathering. J Coat Technol 74:39–4610.1007/BF02720138 ↗
22. Skaja A, Croll S, Fernando D (2006) Mechanical property changes and degradation during accelerated weathering of polyester-urethane coatings. JCT Res 3:41–51
23. Cangialosi D, Boucher VM, Alegria A, Colmenero J (2013) Physical aging in polymers and polymer nanocomposites: recent results and open questions. Soft Matter 9:8619–863010.1039/c3sm51077h ↗
24. Melchiorre Di Crescenzo M, Zendri E, Sánchez-Pons M, Fuster-López L, Yusá-Marco DJ (2014) The use of waterborne paints in contemporary murals: comparing the stability of vinyl, acrylic and styrene-acrylic formulations to outdoor weathering conditions. Polym Degrad Stab 107:285–29310.1016/j.polymdegradstab.2013.12.034 ↗
25. Süske E (2005) Charakteristische Eigenschaften laserdeponierter poly(methyl-methacrylat)-Filme. Mathematisch-Naturwissenschaftliche Fakultät, Georg-August-Universität, Göttingen
26. Hofland A (1997) Making paint from alkyd emulsions. In: Glass JE (ed) Technology for waterborne coatings. American Chemical Society, Washington DC, pp 183–19510.1021/bk-1997-0663.ch010 ↗
27. Muizebelt WJ, Hubert JC, Venderbosch RAM (1994) Mechanistic study of drying of alkyd resins using ethyl linoleate as a model substance. Prog Org Coat 24:263–27910.1016/0033-0655(94)85019-4 ↗