journal article·2016-04

Soft mechanochemical synthesis and electrochemical behavior of LiVMoO6 for all-solid-state lithium batteries

M. Milanova, R. Iordanova, M. Tatsumisago, A. Hayashi, P. Tzvetkov, D. Nihtianova, P. Markov, Y. Dimitriev

Journal of Materials Science· Volume 51· Issue 7
Publisher page

Abstract

In this paper, we report a novel route to obtain LiVMoO6 nanocrystals using a soft mechanochemical synthesis method. Powder X-ray diffraction, infrared, and Raman data indicated the formation of a single-phase LiVMoO6 with brannerite-type structure after 60-min milling time. The average particles size of the obtained LiVMoO6, derived from transmission electron microscopy data is about 46 nm. From UV–Vis diffuse reflectance spectrum, the direct band gap value (2.77 eV) of the material was estimated. The electrochemical characterization of the LiVMoO6 obtained was performed for the first time by assembling an all-solid-state cell, employing LiVMoO6 as a cathode active material. Discharge–charge measurements for 10 cycles were performed in the potential range from 1.8 to 3.7 V under a current density of 0.1 mA cm−2 at room temperature. The assembled all-solid-state Li-In/80Li2S·20P2S5 glass–ceramics/LiVMoO6 battery presents a sustainable reversible capacity of 35 mAh g−1 and a coulombic efficiency close to 100 % after the second to the 10th cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Transition Metal Oxide Nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Reddy MA, Kishore MS, Pralong V, Caignaert V, Varadaraju UV, Raveau B (2007) Electrochemical performance of VOMoO4 as negative electrode material for Li ion batteries. Power Sources 168:509–51210.1016/j.jpowsour.2007.02.089 ↗
2. Mikhailova D, Sarapulova A, Voss A, Thomas A, Oswald S, Gruner W, Trots DM, Bramnik NN, Ehrenberg H (2010) Li3V(MoO4)3: a new material for both Li extraction and insertion. Chem Mater 22:3165–317310.1021/cm100213a ↗
3. Kazakopoulos A, Kalogirou O (2008) Impedance spectroscopy study of LiCuVO4. Solid State Ionics 179:936–94010.1016/j.ssi.2007.12.084 ↗
4. Julien CM (2003) Lithium intercalated compounds: charge transfer and related properties. Mater Sci Eng R 40:47–10210.1016/S0927-796X(02)00104-3 ↗
5. Tarascon J-M, Armand M (2001) Issues and challenges facing rechargeable lithium batteries. Nature 414:359–36710.1038/35104644 ↗
6. Chernova NA, Roppolo M, Dillon AC, Whittingham MS (2009) Layered vanadium and molybdenym oxides: batteries and electrochromics. J Mater Chem 19:2526–255210.1039/b819629j ↗
7. Whittingham MS (2004) Lithium batteries and cathode materials. Chem Rev 104:4271–430110.1021/cr020731c ↗
8. Michael M, Fauzi A, Prabaharan SRS (2000) Soft-combustion (wet chemical) synthesis of a new 4-V class cathode-active material, LiVMoO6, for Li-ion batteries. Int J Inorg Mater 2:261–26710.1016/S1466-6049(99)00056-2 ↗
9. Julien C (2000) 4-Volt cathode materials for rechargeable lithium batteries wet chemistry synthesis, structure and electrochemistry. Ionics 6:30–4610.1007/BF02375545 ↗
10. Liu R, Wang C, Jang L, Lee J (2002) A new anode material LiVMoO6 for use in rechargeable Li-ion batteries. Tamkang J Sci Eng 5:107–112
11. Amdouni N, Zarrouk H, Soulette F, Julien C (2003) Synthesis, structure and lithium intercalation reaction in LiVMoO6 brannerite-type materials. J Mater Chem 13:2374–238010.1039/b300872j ↗
12. Liu R, Wang Y, Drozd V, Hu S, Sheu H (2005) A novel anode material LiVMoO6 for rechargeable lithium-ion batteries. Electrochem Solid State Lett 8:A650–A65310.1149/1.2119629 ↗
13. Liang Y, Yang S, Yi Z, Li M, Sun J, Zhou Y (2005) Rheological phase synthesis and electrochemical performances of LiVMoO6 as a high-capacity anode material for lithium ion batteries. J Mater Sci 40:5553–5555. doi: 10.1007/s10853-005-4549-010.1007/s10853-005-4549-0 ↗
14. Liang Y, Han X, Cong C, Yi Z, Zhou L, Sun J, Zhang K, Zhou Y (2007) Controlled synthesis of rod-like LiVMoO6 nanocrystals for application in lithium-ion batteries. Nanotechnology 18:135607–13561310.1088/0957-4484/18/13/135607 ↗
15. Zhou L, Liang Y, Hu L, Han X, Yi Z, Sun J, Yang S (2008) Much improved capacity and cycling performance of LiVMoO6 cathode for lithium ion batteries. J Alloys Comp 457:389–39310.1016/j.jallcom.2007.02.126 ↗
16. Chen N, Wang C, Hu F, Bie X, Wei Y, Chen G, Du F (2015) Brannerite-type vanadium–molybdenum oxide LiVMoO6 as a promising anode material for lithium-ion batteries with high capacity and rate capability. ACS Appl Mater Interfaces 7:16117–1612310.1021/acsami.5b05030 ↗
17. Cushing BL, Kang SH, Goodenough JB (2001) Instability of brannerite cathode materials upon lithium insertion. Int J Inorg Mater 3:875–87910.1016/S1466-6049(01)00093-9 ↗
18. Kosova N, Devyatkina E, Osintsev D (2004) Dispersed materials for rechargeable lithium batteries: reactive and non-reactive grinding. J Mater Sci 39:5031–5036. doi: 10.1023/B:JMSC.0000039181.03644.b010.1023/B:JMSC.0000039181.03644.b0 ↗
19. Senna M (1993) Incipient chemical interaction between fine particles under mechanical stress – a feasibility of producing advanced materials via mechanochemical routes. Solid State Ionics 63–65:3–910.1016/0167-2738(93)90078-H ↗
20. Avakumov E, Senna M, Kosova N (2001) Soft mechanochemical synthesis: a basis for new chemical technologies. Kluwer Academic Publisher, Boston
21. Milanova M, Iordanova R, Dimitriev Y, Kostov K, Vassilev S (2007) Influence of the synthesis methods on the particles size of the LiVMoO6 phase. J Mater Sci 42:3349–3352. doi: 10.1007/s10853-006-1169-210.1007/s10853-006-1169-2 ↗
22. Pawley G (1981) Unit-cell refinement from powder diffraction scans. J Appl Cryst 14:357–36110.1107/S0021889881009618 ↗
23. Bruker AXS (2008): TOPAS V4: General profile and structure analysis software for powder diffraction data. - User’s Manual, Bruker AXS, Karlsruhe, Germany
24. Tauc J, Grigorovici R, Vancu A (1966) Optical properties and electronic structure of amorphous germanium. Physica Status Solidi b 15:627–63710.1002/pssb.19660150224 ↗
25. Run R, Wadsley A (1966) The crystal structure of ThTi2O6 (brannerite). Acta Cryst 21:974–97810.1107/S0365110X66004274 ↗
26. Hurtado L, Torres-García E, Romero R, Ramírez-Serrano A, Wood J, Natividad R (2013) Photocatalytic performance of Li1-xAgxVMoO6 (0 ≤ x ≤ 1) compounds. Chem Eng J 234:327–33710.1016/j.cej.2013.08.091 ↗
27. Baran EJ, Cabello CI, Nord AG (1987) Raman spectra of some MIIV2O6 brannerite- type metavanadates. J Raman Spectrosc 18:405–40710.1002/jrs.1250180606 ↗
28. Thielemann JP, Resler T, Walter A, Tzolova-Müler G, Hess C (2011) Structure of molybdenum oxide supported on silica SBA-15 studied by Raman, UV-vis and X-ray absorption spectroscopy. Appl Catal A 399:28–3410.1016/j.apcata.2011.03.032 ↗
29. Zǎvoianu R, Bîrjega R, Pavel OD, Cruceanu A, Alifanti M (2005) Hydrotalcite like compounds with low Mo-loading active catalysts for selective oxidation of cyclohexene with hydrogen peroxide. Appl Catal A 286:211–22010.1016/j.apcata.2005.03.009 ↗
30. Centi G, Perathoner S, Trifiro F, Aboukais A, Aissi CF, Guelton M (1992) Physicochemical characterization of V-silicalite. J Phys Chem 96:2617–262910.1021/j100185a042 ↗
31. Porter VR, White WB, Roy R (1972) Optical spectra of the intermediate oxides of titanium, vanadium, molybdenum and tungsten. J Solid State Chem 4:250–25410.1016/0022-4596(72)90113-2 ↗
32. Aleksandrov L, Komatsu T, Iordanova R, Dimitriev Y (2011) Study of molybdenum coordination state and crystalization behaviour in MoO3-La2O3-B2O3 glasses by Raman spectroscopy. J Phys Chem Solids 72:263–26810.1016/j.jpcs.2011.01.004 ↗
33. Mestl G, Verbruggen NFD, Knözinger H (1995) Mechanically activated MoO3. 2. Characterization of defect structures. Langmuir 11:3035–304110.1021/la00008a031 ↗
34. Sapra S, Sarma DD (2004) Evolution of the electronic structure with size in II-IV semiconductor nanocrystals. Phys Rev B 69:125304–12531010.1103/PhysRevB.69.125304 ↗
35. Navas I, Vinodkumar R, Mahadevan Pillali VP (2011) Self-assembly and photoluminescence of molybdenum oxide nanoparticles. Appl Phys A 103:373–38010.1007/s00339-011-6345-9 ↗
36. Park M, Zhang X, Chung M, Less GB, Sastry AM (2010) A review of conduction phenomena in Li-ion batteries. J Power Source 195:7904–792910.1016/j.jpowsour.2010.06.060 ↗
37. Rao MC (2010) Optical absorption studies of LiCoO2 thin films grown by pulsed laser depositions. Int J Pure Apll Phys 6:365–370
38. Takada K, Aotani N, Iwamoto K, Kondo S (1996) Solid state lithium battery with oxysulfide glass. Solid State Ionics 86–88:877–88210.1016/0167-2738(96)00199-3 ↗
39. Doi T, Iriyama Y, Abe T, Ogumi Z (2005) Pulse voltammetric and ac impedance spectroscopic studies on lithium ion transfer at an electrolyte/Li4/3Ti5/4O4 electrode interface. Anal Chem 77:1696–170010.1021/ac048389m ↗
40. Kanno R, Murayama M (2001) Lithium ionic conductor thio-LISICON. J Electrochem Soc 148:A742–A74610.1149/1.1379028 ↗
41. Hayashi A, Hama S, Minami T, Tatsumisago M (2003) Formation of superionic crystals from mechanically milled Li2S-P2S5 glasses. Electrochem Commun 5:111–11410.1016/S1388-2481(02)00555-6 ↗
42. Muramatsu H, Hayashi A, Ohmoto T, Hama S, Tatsumisago M (2011) Structural change of Li2S-P2S5 sulfide solid electrolytes in the atmosphere. Solid State Ionics 182:116–11910.1016/j.ssi.2010.10.013 ↗
43. Ooura Y, Machida N, Uehara T, Kinoshita S, Naito M, Shigematsu T, Kondo S (2014) A new lithium-ion conducting glass ceramics in the composition of 75Li2S·5P5S3·20P2S5 (mol%). Solid State Ionics 262:733–73710.1016/j.ssi.2013.08.023 ↗
44. Hakari T, Nagao M, Hayashi A, Tatsumisago M (2014) Preparation of composite electrode with Li2S-P2S5 glasses as active materials for all-solid-state lithium secondary batteries. Solid State Ionics 262:147–15010.1016/j.ssi.2013.09.023 ↗
45. Kim J, Yoon Y, Eom M, Shin D (2012) Characterization of amorphous and crystalline Li2S-P2S5-P2Se5 solid electrolytes for all-solid-state lithium ion batteries. Solid State Ionics 225:626–63010.1016/j.ssi.2012.05.013 ↗
46. Nagao M, Hayashi A, Tatsumisago M (2013) Electrochemical performance of all-solid-state Li/S batteries with sulfur-based composite electrodes prepared by mechanical milling at high temperature. Energy Technol 1:186–19210.1002/ente.201200019 ↗
47. Kostecki R, Lei J, McLarnon F, Shim J, Striebel K (2006) Diagnostic evaluation of detrimental phenomena in high-power lithium - ion batteries. J Electrochem Soc 153:A669–A67210.1149/1.2170551 ↗
48. Doeff MM, Hu Y, McLarnon F, Kostecki R (2003) Effect of surface carbon structure on the electrochemical performance of LiFePO4. Electrochem Solid State Lett 6:A207–A20910.1149/1.1601372 ↗
49. Mizuno F, Hayashi A, Tadanaga K, Tatsumisago M (2006) High rate performances of all-solid-state In/LiCoO2 cells with the Li2S-P2S5 glass-ceramics electrolyte. Solid State Ionics 177:2731–273510.1016/j.ssi.2006.02.003 ↗
50. Tatsumisago M, Nagao M, Hayashi A (2013) Recent development of sulfide solid electrolytes and interfacial modification for all-solid-state rechargeable lithium batteries. J Asian Ceram Soc 1:17–2510.1016/j.jascer.2013.03.005 ↗
51. Nagao M, Hayashi A, Tatsumisago M, Ichinose T, Ozaki T, Togawa Y, Mori S (2015) Li2S nanocomposites underlying high-capacity and cycling stability in all-solid-state lithium-sulfur batteries. J Power Sources 274:471–47610.1016/j.jpowsour.2014.10.043 ↗