journal article·2010-11

Reverse ageing in hot-rolled high-carbon steel wire rod

T. Chanda

Journal of Materials Science· Volume 45· Issue 22
Publisher page

Abstract

Effects of ageing time on area reduction of hot-rolled high-carbon steel wire rods were studied. Tensile testing and X-ray study of as-rolled wire rods were carried out. Gleeble simulation and hydrogen content determination were also conducted. The results show that the reduction of area increases with ageing time at room temperature and the UTS remain unchanged which are contrary to normal ageing or strain ageing. In normal ageing, the ductility drops and the yield strength increases. In this study, the Gleeble simulation and X-ray data support that the transformation from pearlite to austenite is normal and there is no evidence of retained austenite or martensitic transformation in the steel. The hydrogen content drops as the time passes. The drop is rapid in first few days and this drop increases the ductility in rolled high-carbon wire rod. Hydrogen reduces the cohesive strength and the pressure generated due to transformation of atomic hydrogen-to-molecular state combines with tensile stress and causes cleavage or mixed type of fracture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Tagushira S, Sakai K, Furuhara T, Maki T (2000) ISIJ Int 40:114910.2355/isijinternational.40.1149 ↗
2. Han K, Mottishaw TD, Smith GDW, Edmonds DV, Stacey AG (1995) Mater Sci Eng A 190:20710.1016/0921-5093(94)09604-U ↗
3. Han K, Edmonds DV, Smith GDW (2001) Met Mater Trans A 32A:131310.1007/s11661-001-0222-7 ↗
4. Languillaume J, Kapelski G, Baudelet B (1997) Mater Lett 33:24110.1016/S0167-577X(97)00109-2 ↗
5. Baird JD (1971) Metall Rev 16:110.1179/095066071790137928 ↗
6. Leslie WC (1983) The physical metallurgy of steel. McGraw-Hill, New York, pp 68–109
7. Wilson DV, Russel B (1960) Acta Metall 8:3610.1016/0001-6160(60)90138-3 ↗
8. McIvor ID (1989) Ironmaking Steelmaking 16(1):55
9. Morrison WB (1989) Ironmaking Steelmaking 16(2):123
10. Llewellyn DT (1993) Ironmaking Steelmaking 20(1):35
11. Weidig C et al (1995) Wire J Int 28(1):82
12. Pickering FB, Garbarz B (1989) Mater Sci Technol 5:22710.1179/mst.1989.5.3.227 ↗
13. Dunlop GL, Carlsson CJ, Frimodig G (1978) Met Trans 9A:26110.1007/BF02646709 ↗
14. Khalid FA, Edmonds DV (1994) Scr Metall 30:125110.1016/0956-716X(94)90254-2 ↗
15. Gawne DT (1985) Mater Sci Technol 1:58310.1179/mst.1985.1.8.583 ↗
16. Roy D (1996) MS thesis, Calcutta University
17. Bhattacharya R, Jha G (2005) Internal Report, TATA Steel R&D
18. Choi S (2003) Mater Sci Eng A 363:7210.1016/S0921-5093(03)00587-2 ↗
19. Kop TA, Sietsma J, Van Der Zwaag S (2001) J Mater Sci 36:519. doi: 10.1023/A:100480540240410.1023/A:1004805402404 ↗
20. Costa JE, Thompson AW (1982) Met Trans A 13A:131510.1007/BF02645516 ↗
21. Seferian D (1962) The metallurgy of welding. Chapman and Hall, London
22. Fast JD (1950) Philips Res Rep 5:37