Effect of interfacial area on densification and microstructural evolution in silicon carbide–boron carbide particulate composites
Source abstract
Abstract
A range of SiC–B 4 C composites have been prepared by pressureless sintering, using different proportions of two sizes of B 4 C; 7 and 70 μm. The interfacial area between the B 4 C and SiC has been quantified and is shown to have a significant effect on both densification and the resultant microstructure of the composites. SiC/B 4 C interfaces typically hinder densification. SiC/B 4 C interfacial area is also shown to be related to grain growth and polytype distribution in the SiC. With more SiC/B 4 C interfacial area, grain growth in the SiC is restricted and less of the SiC transforms from the starting 6H polytype to the 4H one. It is therefore suggested that it may be possible to use SiC/B 4 C interfacial area as a means by which to engineering the microstructure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Kuzenkova MA, Kislyi PS, Grabchuk BL et al (1979) The structure and properties of sintered boron carbide. J Less Common Met 67:217–22310.1016/0022-5088(79)90095-X ↗
2. Karandikar PG, Wong S, Evans G et al (2010) Microstructural development and phase changes in reaction bonded boron carbide. Ceram Eng Sci Proc 31:251–25910.1002/9780470944004.ch22 ↗
3. Pittari J III, Subhash G, Trachet A et al (2015) The rate-dependent response of pressureless-sintered and reaction-bonded silicon carbide-based ceramics. Int J Appl Ceram Technol 12:207–21610.1111/ijac.12332 ↗
4. Vandeperre LJ, Teo JH (2014) Pressureless sintering of SiC–B4C composites. Ceram Eng Sci Proc 34:101
5. Schwetz KA, Grellner W (1981) The influence of carbon on the microstructure and mechanical properties of sintered boron carbide. J Less Common Met 82:37–4710.1016/0022-5088(81)90195-8 ↗
6. Padture NP (1994) In situ-toughened silicon carbide. J Am Ceram Soc 77:519–52310.1111/j.1151-2916.1994.tb07024.x ↗
7. Stobierski L, Gubernat A (2003) Sintering of silicon carbide I. Effect of carbon. Ceram Int 29:287–29210.1016/S0272-8842(02)00117-7 ↗
8. Wereszczak AA, Lin H-, Gilde GA (2006) The effect of grain growth on hardness in hot-pressed silicon carbides. J Mater Sci 41:4996–5000. doi: 10.1007/s10853-006-0110-z10.1007/s10853-006-0110-z ↗
9. Hamminger R (1989) Carbon inclusions in sintered silicon carbide. J Am Ceram Soc 72:1741–174410.1111/j.1151-2916.1989.tb06317.x ↗
10. Jung CH, Kim CH (1991) Sintering and characterization of Al2O3–B4C composites. J Mater Sci 26:5037–5040. doi: 10.1007/BF0054988810.1007/BF00549888 ↗
11. Lin X, Ownby PD (2000) Pressureless sintering of B4C whisker reinforced Al2O3 matrix composites. J Mater Sci 35:411–418. doi: 10.1023/A:100471530044110.1023/A:1004715300441 ↗
12. Górny G, Rączka M, Stobierski L et al (1997) Microstructure-property relationship in B4C–βSiC materials. Solid State Ion 101–103:953–95810.1016/S0167-2738(97)00378-0 ↗
13. Stobierski L, Gubernat A (2003) Sintering of silicon carbide II. Effect of boron. Ceram Int 29:355–36110.1016/S0272-8842(02)00144-X ↗
14. Shaffer PTB (1970) Solubility of boron in alpha silicon carbide. Mater Res Bull 5:519–52110.1016/0025-5408(70)90061-9 ↗
15. Magnani G, Beltrami G, Minoccari GL et al (2001) Pressureless sintering and properties of alphaSiC–B4C composite. J Eur Ceram Soc 21:633–63810.1016/S0955-2219(00)00244-2 ↗
16. Shih CJ, Meyers MA, Nesterenko VF et al (2000) Damage evolution in dynamic deformation of silicon carbide. Acta Mater 48:2399–242010.1016/S1359-6454(99)00409-7 ↗
17. Groth B, Haber R, Mann A (2014) Raman micro-spectroscopy of polytype and structural changes in 6H-silicon carbide due to machining. Int J Appl Ceram Technol 12:795–80410.1111/ijac.12267 ↗
18. Sigl LS, Kleebe HJ (1993) Core/rim structure of liquid-phase-sintered silicon carbide. J Am Ceram Soc 76:773–77610.1111/j.1151-2916.1993.tb03677.x ↗
19. Zhou Y, Tanaka H, Otani S et al (1999) Low-temperature pressureless sintering of alpha-SiC with Al4C3–B4C–C additions. J Am Ceram Soc 82:1959–196410.1111/j.1151-2916.1999.tb02026.x ↗
20. Tanaka H, Zhou Y (1999) Low temperature sintering and elongated grain growth of 6H-SiC powder with AlB2 and C additives. J Mater Res 14:518–52210.1557/JMR.1999.0074 ↗
21. Tanaka H, Yoshimura HN, Otani S et al (2000) Influence of silica and aluminum contents on sintering of and grain growth in 6H-SiC powders. J Am Ceram Soc 83:226–22810.1111/j.1151-2916.2000.tb01177.x ↗
22. Tanaka H, Hirosaki N, Nishimura T et al (2003) Nonequiaxial grain growth and polytype transformation of sintered α-silicon carbide and β-silicon carbide. J Am Ceram Soc 86:2222–222410.1111/j.1151-2916.2003.tb03638.x ↗
23. Lee SK, Kim CH (1994) Effects of α-SiC versus β-SiC starting powders on microstructure and fracture toughness of SiC sintered with Al2O3–Y2O3 additives. J Am Ceram Soc 77:1655–165810.1111/j.1151-2916.1994.tb09771.x ↗
24. Gurland J (1967) A study of contact and contiguity of dispersions in opaque samples. In: Elias H (ed) Stereology. Springer, Berlin, pp 250–25110.1007/978-3-642-88260-9_44 ↗
25. Morosin B, Mullendore AW, Emin D et al (1986) Rhombohedral crystal structure of compounds containing boron-rich icosahedra. AIP Conf Proc 86:70–8610.1063/1.35589 ↗
26. Bind JM (1978) Phase transformation during hot-pressing of cubic SiC. Mater Res Bull 13:91–9610.1016/0025-5408(78)90071-5 ↗
27. Capitani GC, Di Pierro S, Tempesta G (2007) The 6H-(SiC) structure model: further refinement from SCXRD data from a terrestrial moissanite. Am Miner 92:403–40710.2138/am.2007.2346 ↗
28. Bordia RK, Scherer GW (1988) On constrained sintering-III. Rigid inclusions. Acta Metall 36:2411–241610.1016/0001-6160(88)90191-5 ↗