Materials opportunities in layered manufacturing technology
Source abstract
Abstract
Layered manufacturing technology describes a range of techniques where 3-dimensional objects are constructed from a laminated form. There are a range of methods by which this can be achieved but all rely on the same fundamental set of processes. First the object to be fabricated must be described in terms of an accurate 3-dimensional design representation. This must then be reformatted to describe the object in terms of a number of slices with finite thickness. This “slice information” is then used to fabricate the appropriate number of slices from the desired material. Finally these slices are assembled to form the solid object. In practice a number of the current technologies combine the slice fabrication and assembly processes by using a previously deposited slice as the template for the deposition of subsequent slices. In practice the techniques manufacture an approximation of the desired shape by building the object from a number of discrete building units of fixed size. This simplified form can then be built in the absence of tools, moulds or dies. Thus, the technologies represent a trade-off between ease of manufacture without tools and accuracy of the final surface representation. The manufacturing method of laminated object building may also limit the fabrication speed as this will be limited by the rate at which the fundamental manufacturing blocks can be deposited. Clearly, there is a direct analogy between layered manufacturing and a number of traditional manufacturing methods.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Nanotechnology research and applications · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. J. J. BEAMAN, J. W. BARLOW, D. L. BOURELL, R. H. CRAWFORD, H. L. MARCUS and D. P. McALEA, “Solid Freeform Fabrication: A New Direction in Manufacturing” (Kluwer Academic Publishers, Boston, MA, 1997).10.1007/978-1-4615-6327-3 ↗
2. J. W. HALLORAN, in “Engineering with Ceramics,” edited by W. E. Lee and B. Derby, Brit. Ceram. Proc. 59 (1999) 17.
3. Z. E. LIU, P. WEI, B. KERNAN, A. H. HEUER and J. D. CRAWLEY, in “Solid Freeform Fabrication Proceedings,” edited by H. L. Marcus, J. J. Beaman, J. W. Barlow, D. L. Bourell and R. H. Crawford (University of Texas, Austin, 1995) p. 377.