journal article·2020-03

Fatigue–creep behavior of two ferritic stainless steels in simulated automotive exhaust gas and argon

Tianlong Liu, Xiaofei Zhu, Lijia Chen, Hongyun Bi, Yingfei Lin, Jun Long

Journal of Materials Science· Volume 55· Issue 8
Publisher page

Abstract

The fatigue–creep behaviors of 15CrNbTi and 15Cr0.5MoNbTi steels in the simulated automotive exhaust gas and in argon at 800 °C were investigated. The fatigue–creep tests were conducted under stress-controlled mode with a stress ratio of 0.1 at 800 °C in the simulated automotive exhaust gas and in argon on an electrohydraulic servo fatigue testing machine. A trapezoidal waveform was adopted, and when the cyclic stress reached the maximum tension stress, a 10-s hold time was introduced. The tests results show that 15Cr0.5MoNbTi steel has higher cyclic deformation resistance and fatigue life than 15CrNbTi steel in two atmospheres. Compared with the simulated automotive exhaust gas, both experimental materials possess higher cyclic deformation resistance and fatigue life in argon. The cracks of two experimental materials in two atmospheres were both transgranularly initiated from the free surfaces of the steels and propagated in a transgranular manner. The main substructures of two experimental materials after fractured in two atmospheres were sub-grain structures which formed during fatigue–creep tests. The synergistic effects of solid solution strengthening of Mo and precipitation strengthening of fine Fe2Nb phases increased the cyclic deformation resistance and the fatigue life of 15Cr0.5MoNbTi steel at 800 °C in two atmospheres. In addition, Mo element improved the oxidation resistance of 15Cr0.5MoNbTi steel in the simulated automotive exhaust gas, which has a beneficial effect on the prolongation of fatigue life.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Ma L, Hu SS, Shen JQ, Han J, Zhu ZX (2016) Effects of Cr content on the microstructure and properties of 26Cr–3.5Mo–2Ni and 29Cr–3.5Mo–2Ni super ferritic stainless steels. J Mater Sci Technol 32:552–56010.1016/j.jmst.2016.03.022 ↗
2. Vafaeian S, Fattah-alhosseini A, Mazaheri Y, Keshavarz MK (2016) On the study of tensile and strain hardening behavior of a thermomechanically treated ferritic stainless steel. Mater Sci Eng, A 669:480–48910.1016/j.msea.2016.04.050 ↗
3. Rodrigues DG, de Alcântara CM, Santos DB, de Oliveira TR, Gonzalez BM (2017) Effects of annealing conditions on recrystallization, texture, and average normal anisotropy coefficient of a niobium-stabilized ferritic stainless steel. Steel Res Int 87:170021410.1002/srin.201700214 ↗
4. Ali-Löytty H, Hannula M, Honkanen M, Östman K, Lahtonen K, Valden M (2016) Grain orientation dependent Nb-Ti microalloying mediated surface segregation on ferritic stainless steel. Corros Sci 112:204–21310.1016/j.corsci.2016.07.024 ↗
5. Bongiorno V, Piccardo P, Anelli S, Spotorno R (2017) Influence of surface finishing on high-temperature oxidation of AISI type 444 ferritic stainless steel used in SOFC stacks. Acta Metall Sin (Engl Lett) 30:697–71110.1007/s40195-017-0543-1 ↗
6. Shan YT, Luo XH, Hu XQ, Liu S (2011) Mechanisms of solidification structure improvement of ultra pure 17 wt% Cr ferritic stainless steel by Ti, Nb addition. J Mater Sci Technol 27:352–35810.1016/S1005-0302(11)60073-X ↗
7. Fu JW, Qiu WX, Nie QQ, Wu YC (2017) Precipitation of TiN during solidification of AISI 439 stainless steel. J Alloys Compd 699:938–94610.1016/j.jallcom.2017.01.018 ↗
8. Wang LX, Song CJ, Sun FM, Li LJ, Zhai QJ (2009) Microstructure and mechanical properties of 12 wt% Cr ferritic stainless steel with Ti and Nb dual stabilization. Mater Des 30:49–5610.1016/j.matdes.2008.04.040 ↗
9. Fujita N, Ohmura K, Kikuchi M, Suzuki T, Funaki S, Hiroshige I (1996) Effect of Nb on high-temperature properties for ferritic stainless steel. Scripta Mater 35:705–71010.1016/1359-6462(96)00214-X ↗
10. Yan HT, Bi HY, Li X, Xu Z (2009) Effect of two-step cold rolling and annealing on texture, grain boundary character distribution and r-value of Nb + Ti stabilized ferritic stainless steel. Mater Charact 60:65–6810.1016/j.matchar.2008.05.006 ↗
11. Shu J, Bi HY, Li X, Xu Z (2012) Effect of Ti addition on forming limit diagrams of Nb-bearing ferritic stainless steel. J Mater Process Technol 212:59–6510.1016/j.jmatprotec.2011.08.004 ↗
12. Malfliet A, Van den Broek W, Chassagne F, Mithieux J-D, Blanpain B, Wollants P (2011) Fe3Nb3N precipitates of the Fe3W3C type in Nb stabilized ferritic stainless steel. J Alloys Compd 509:9583–958810.1016/j.jallcom.2011.03.155 ↗
13. Juuti T, Rovatti L, Mäkelä A, Karjalainen LP, Porter D (2014) Influence of long heat treatments on the laves phase nucleation in a type 444 ferritic stainless steel. J Alloys Compd 616:250–25610.1016/j.jallcom.2014.06.201 ↗
14. Fujita N, Ohmura K, Yamamoto A (2013) Changes of microstructures and high temperature properties during high temperature service of niobium added ferritic stainless steels. Mater Sci Eng, A 351:272–28110.1016/S0921-5093(02)00831-6 ↗
15. Ha TH, Jeong HT, Sung HJ (2007) High temperature bending fatigue behavior of stainless steels for automotive exhaust. J Mater Process Technol 187–188:555–55810.1016/j.jmatprotec.2006.11.083 ↗
16. Miller DA, Hamm CD, Phillips JL (1982) A mechanistic approach to the prediction of creep-dominated failure during simultaneous creep-fatigue. Mater Sci Eng 53:233–24410.1016/0025-5416(82)90056-8 ↗
17. Yuan SP, Liu G, Wang RH, Zhang G-J, Pu X, Sun J, Chen K-H (2009) Effect of precipitate morphology evolution on the strength-toughness relationship in Al-Mg-Si alloys. Scripta Mater 60:1109–111210.1016/j.scriptamat.2009.02.047 ↗
18. Yuan SP, Liu G, Wang RH, Zhang G-J, Pu X, Sun J, Chen K-H (2009) Aging-dependent coupling effect of multiple precipitates on the ductile fracture of heat-treatable aluminum alloys. Mater Sci Eng, A 499:387–39510.1016/j.msea.2008.09.012 ↗
19. Liu TL, Chen LJ, Bi HY, Che X (2014) Effect of Mo on high-temperature fatigue behavior of 15CrNbTi ferritic stainless steel. Acta Metall Sin (Engl Lett) 27:452–45610.1007/s40195-014-0064-0 ↗
20. Miller CF, Simmons GW, Wei RP (2003) Evidence for internal oxidation during oxygen enhanced crack growth in P/M Ni-based superalloys. Scripta Mater 48:103–10810.1016/S1359-6462(02)00355-X ↗
21. Leo Prakash DG, Walsh MJ, Maclachlan D, Korsunsky AM (2009) Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation. Int J Fatigue 31:1966–197710.1016/j.ijfatigue.2009.01.023 ↗
22. Fischer T, Kuhn B (2019) Influence of steam atmosphere on the crack propagation behavior of a 9–12% Cr ferritic/martensitic steel at temperatures from 300 to 600 °C depending on frequency and hold time. Int J Fatigue 119:62–7710.1016/j.ijfatigue.2018.09.012 ↗
23. Salem M, Le Roux S, Dour G, Lamesle P, Choquet K, Rézaï-Aria F (2019) Effect of aluminizing and oxidation on the thermal fatigue damage of hot work tool steels for high pressure die casting applications. Int J Fatigue 119:126–13810.1016/j.ijfatigue.2018.09.018 ↗
24. Shu J, Bi HY, Li X, Xu Z (2012) The effects of molybdenum addition on high temperature oxidation behavior at 1000 °C of Type 444 ferritic stainless steel. Oxid Met 78:253–26710.1007/s11085-012-9304-8 ↗
25. Wei LL, Zheng JH, Chen LQ, Misra RDK (2018) High temperature oxidation behavior of ferritic stainless steel containing W and Ce. Corros Sci 142:79–9210.1016/j.corsci.2018.07.017 ↗
26. Fournier B, Sauzay M, Caës C, Noblecourt M, Mottot M, Bougault A, Rabeau V, Pineau A (2008) Creep–fatigue–oxidation interactions in a 9Cr–1Mo martensitic steel. Part I: effect of tensile holding period on fatigue lifetime. Int J Fatigue 30:649–66210.1016/j.ijfatigue.2007.05.007 ↗
27. Ota H, Nakamura T, Maruyama K (2013) Effect of solute atoms on thermal fatigue properties in ferritic stainless steels. Mater Sci Eng, A 586:133–14110.1016/j.msea.2013.08.007 ↗
28. Oikawa H, Yasuda A (1979) Redetermination of internal stress during creep of Al-5.5 at.% Mg alloy at high temperatures. Met Sci 13:551–55310.1179/030634579790438264 ↗
29. Horiuchi R, Otsuka M (1972) Mechanism of high temperature creep of aluminum–magnesium solid solution alloys. Trans Jpn Inst Met 13:284–29310.2320/matertrans1960.13.284 ↗
30. Orlová A, Ĉadek J (1973) Some substructural aspects of high-temperature creep in metals. Philos Mag 28:891–89910.1080/14786437308220990 ↗
31. Gottstein G (2004) Physical foundations of materials science. Springer, Berlin10.1007/978-3-662-09291-0 ↗
32. Strange A, Gosch DJ (1997) Microstructural development and stability in high chromium ferritic power plant steels. Institute of Materials, London
33. Kato M (1999) Introduction to the theory of dislocations. Shokabo, Tokyo
34. Sim GM, Ahn JC, Hong SC, Lee KJ, Lee KS (2005) Effect of Nb precipitate coarsening on the high temperature strength in Nb containing ferritic stainless steels. Mater Sci Eng, A 396:159–16510.1016/j.msea.2005.01.030 ↗
35. Nabiran N, Weber S, Theisen W (2012) Influence of Laves phase precipitation and coarsening on high-temperature strength of ferritic stainless steels. Steel Res Int 83:758–76510.1002/srin.201200016 ↗