Change in failure mode of carbon nanofibers in nanocomposites as a function of loading rate
Source abstract
Abstract
Vapor-grown carbon nanofiber (CNF)/epoxy composites are characterized under compression at 5 × 10−3–2800 s−1 strain rates. A difference in the fiber failure mechanism is identified based on the strain rate. CNFs show signs of deformation along their entire length under quasi-static compression. In contrast, the high-strain rate failure results in rupture of outer turbostratic carbon layers, leading to stress transfer to the inner graphite layers. The graphitic layers elongate and rupture, forming a conical tip at the fracture cross section of the CNFs. The strength of nanocomposites at high strain rate is measured to be up to 180 % higher depending on the composite composition and strain rate. CNFs substantially increase the localized plastic deformation of the matrix under quasi-static compression and result in nanoscale deformation features on the failure surface. The observed higher strength and modulus of nanocomposites at high strain rates are attributed to the difference in the matrix and fiber failure mechanisms at different strain rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Al-Saleh MH, Sundararaj U (2011) Review of the mechanical properties of carbon nanofiber/polymer composites. Compos A Appl Sci Manuf 42(12):2126–214210.1016/j.compositesa.2011.08.005 ↗
2. Poveda RL, Gupta N (2016) Carbon nanofiber reinforced polymer composites. Springer Briefs in Materials. Springer, New York. ISBN 978-3-319-23787-910.1007/978-3-319-23787-9 ↗
3. Choi Y-K, Sugimoto K-I, Song S-M, Gotoh Y, Ohkoshi Y, Endo M (2005) Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers. Carbon 43(10):2199–220810.1016/j.carbon.2005.03.036 ↗
4. Gauthier C, Chazeau L, Prasse T, Cavaille JY (2005) Reinforcement effects of vapour grown carbon nanofibres as fillers in rubbery matrices. Compos Sci Technol 65(2):335–34310.1016/j.compscitech.2004.08.003 ↗
5. Bafekrpour E, Simon GP, Naebe M, Habsuda J, Yang C, Fox B (2013) Preparation and properties of composition-controlled carbon nanofiber/phenolic nanocomposites. Compos B Eng 52:120–12610.1016/j.compositesb.2013.03.007 ↗
6. Bafekrpour E, Simon GP, Yang C, Chipara M, Habsuda J, Fox B (2013) Functionally graded carbon nanofiber-phenolic nanocomposites for sudden temperature change applications. Polymer 54(15):3940–394810.1016/j.polymer.2013.05.052 ↗
7. Bafekrpour E, Yang C, Natali M, Fox B (2013) Functionally graded carbon nanofiber/phenolic nanocomposites and their mechanical properties. Compos A Appl Sci Manuf 54:124–13410.1016/j.compositesa.2013.07.009 ↗
8. Hammel E, Tang X, Trampert M, Schmitt T, Mauthner K, Eder A, Pötschke P (2004) Carbon nanofibers for composite applications. Carbon 42(5–6):1153–115810.1016/j.carbon.2003.12.043 ↗
9. Al-Saleh MH, Sundararaj U (2009) A review of vapor grown carbon nanofiber/polymer conductive composites. Carbon 47(1):2–2210.1016/j.carbon.2008.09.039 ↗
10. Tibbetts GG, Lake ML, Strong KL, Rice BP (2007) A review of the fabrication and properties of vapor-grown carbon nanofiber/polymer composites. Compos Sci Technol 67(7–8):1709–171810.1016/j.compscitech.2006.06.015 ↗
11. Chen P-C, Xu J, Chen H, Zhou C (2011) Hybrid silicon-carbon nanostructured composites as superior anodes for lithium ion batteries. Nano Res 4(3):290–29610.1007/s12274-010-0081-x ↗
12. Zeltmann SE, Poveda RL, Gupta N (2015) Accelerated environmental degradation and residual flexural analysis of carbon nanofiber reinforced composites. Polym Degrad Stab 121:348–35810.1016/j.polymdegradstab.2015.09.022 ↗
13. Poveda RL, Achar S, Gupta N (2012) Thermal expansion of carbon nanofiber-reinforced multiscale polymer composites. JOM 64(10):1148–115710.1007/s11837-012-0402-5 ↗
14. Poveda RL, Dorogokupets G, Gupta N (2013) Carbon nanofiber reinforced syntactic foams: degradation mechanism for long term moisture exposure and residual compressive properties. Polym Degrad Stab 98:2041–205310.1016/j.polymdegradstab.2013.07.007 ↗
15. Poveda RL, Gupta N (2014) Electrical properties of carbon nanofiber reinforced multiscale polymer composites. Mater Des 56:416–42210.1016/j.matdes.2013.11.074 ↗
16. Tibbetts GG, Beetz CP (1987) Mechanical properties of vapour-grown carbon fibres. J Phys D Appl Phys 20(3):292–29710.1088/0022-3727/20/3/008 ↗
17. Ozkan T, Naraghi M, Chasiotis I (2010) Mechanical properties of vapor grown carbon nanofibers. Carbon 48(1):239–24410.1016/j.carbon.2009.09.011 ↗
18. Lawrence JG, Berhan LM, Nadarajah A (2008) Elastic properties and morphology of individual carbon nanofibers. ACS Nano 2(6):1230–123610.1021/nn7004427 ↗
19. Raza MA, Westwood A, Stirling C (2012) Effect of processing technique on the transport and mechanical properties of vapour grown carbon nanofibre/rubbery epoxy composites for electronic packaging applications. Carbon 50(1):84–9710.1016/j.carbon.2011.08.010 ↗
20. Raza MA, Westwood AVK, Stirling C, Hondow N (2011) Transport and mechanical properties of vapour grown carbon nanofibre/silicone composites. Compos A Appl Sci Manuf 42(10):1335–134310.1016/j.compositesa.2011.05.016 ↗
21. Ingram J, Zhou Y, Jeelani S, Lacy T, Horstemeyer MF (2008) Effect of strain rate on tensile behavior of polypropylene and carbon nanofiber filled polypropylene. Mater Sci Eng A 489(1–2):99–10610.1016/j.msea.2008.01.010 ↗
22. Gibson J, McKee J, Freihofer G, Raghavan S, Gou J (2013) Enhancement in ballistic performance of composite hard armor through carbon nanotubes. Int J Smart Nano Mater 4(4):212–22810.1080/19475411.2013.870938 ↗
23. Breuer O, Sundararaj U (2004) Big returns from small fibers: a review of polymer/carbon nanotube composites. Polym Compos 25(6):630–64510.1002/pc.20058 ↗
24. Kolsky H (1949) An investigation of the mechanical properties of materials at very high rates of loading. Proc Phys Soc B 62:67610.1088/0370-1301/62/11/302 ↗
25. Gupta N, Luong DD, Rohatgi PK (2011) A method for intermediate strain rate compression testing and study of compressive failure mechanism of Mg-Al-Zn alloy. J Appl Phys 109(10):10351210.1063/1.3590155 ↗
26. Dimchev M, Caeti R, Gupta N (2010) Effect of carbon nanofibers on tensile and compressive characteristics of hollow particle filled composites. Mater Des 31(3):1332–133710.1016/j.matdes.2009.09.007 ↗
27. Luong DD, Strbik OM III, Hammond VH, Gupta N, Cho K (2013) Development of high performance lightweight aluminum alloy/SiC hollow sphere syntactic foams and compressive characterization at quasi-static and high strain rates. J Alloy Compd 550:412–42210.1016/j.jallcom.2012.10.171 ↗
28. Gray GT III (2000) Classic split-Hopkinson pressure bar testing. In: Kuhn H, Medlin D (eds) ASM handbook, vol 8. ASM-International, Materials Park
29. Yusop MZM, Ghosh P, Yaakob Y, Kalita G, Sasase M, Hayashi Y, Tanemura M (2012) In situ TEM observation of Fe-included carbon nanofiber: evolution of structural and electrical properties in field emission process. ACS Nano 6(11):9567–957310.1021/nn302889e ↗
30. Uchida T, Anderson D, Minus M, Kumar S (2006) Morphology and modulus of vapor grown carbon nano fibers. J Mater Sci 41(18):5851–5856. doi: 10.1007/s10853-006-0324-010.1007/s10853-006-0324-0 ↗
31. Palmeri MJ, Putz KW, Brinson LC (2010) Sacrificial bonds in stacked-cup carbon nanofibers: biomimetic toughening mechanisms for composite systems. ACS Nano 4(7):4256–426410.1021/nn100661a ↗
32. Naik NK, Pandya KS, Kavala VR, Zhang W, Koratkar NA (2015) High-strain rate compressive behavior of multi-walled carbon nanotube dispersed thermoset epoxy resin. J Compos Mater 49:903–91010.1177/0021998314527329 ↗