Glass reactive sintering as an alternative route for the synthesis of NZP glass–ceramics
Source abstract
Abstract
The NZP-type crystal structure allows a large number of ionic substitutions which leads to ceramics with adjustable thermal expansion properties or interesting ionic conductivity. However, NZP is difficult to fabricate into monoliths because it requires both high temperatures and long sintering times. An alternative low temperature route to obtain a tungsten (IV) and tin (IV) containing NZP crystalline phase uses a process of glass reactive sintering of a phosphate glass. Using a microwave oven, a glass with the appropriate composition in the NaPO3–Sn(II)O–W(VI)O3 ternary diagram is prepared by a conventional melting and casting technique. After crushing, the glass powder is pressed at room temperature. The green pellet is cured during various times at temperatures where glass reactive sintering takes place. From XRD and DTA experiments, we have shown that different parameters influence the achievement of NZP phase. Consequently, specific conditions, such as (i) initial glass composition, (ii) equimolar quantities of SnO and WO3, (iii) glass particle size lower than 100 μm, and (iv) curing conducted under air, are required to obtain a glass–ceramic with a single crystalline phase with the NZP-type crystal structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nuclear materials and radiation effects · Microwave Dielectric Ceramics Synthesis · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Hagman LO, Kierkegaard P (1968) Acta Chem Scand 22:182210.3891/acta.chem.scand.22-1822 ↗
2. Subba Rao GV, Varadaraju UV, Thomas KA, Sivasankar B (1987) J Solid State Chem 70:10110.1016/0022-4596(87)90183-6 ↗
3. Leclaire A, Borel MM, Grandin A, Raveau B (1989) Acta Cryst C 45:69910.1107/S0108270188013708 ↗
4. Goodenough JB, Hong HY-P, Kafalas JA (1976) Mater Res Bull 11:20310.1016/0025-5408(76)90077-5 ↗
5. Oikonomou P, Dedeloudis C, Stournaras CJ, Ftikos C (2007) J Eur Ceram Soc 27:125310.1016/j.jeurceramsoc.2006.04.021 ↗
6. Breval E, McKinstry HA, Agrawal DK (2000) J Mater Sci 35:3359. doi: 10.1023/A:100482891790810.1023/A:1004828917908 ↗
7. Buvaneswari G, Varadaraju UV (2000) Mater Res Bull 35:131310.1016/S0025-5408(00)00316-0 ↗
8. Roy R, Vance ER, Alamo J (1982) Mater Res Bull 17:58510.1016/0025-5408(82)90040-X ↗
9. Yamamoto K, Kasuga T, Abe Y (1997) J Am Ceram Soc 80:82210.1111/j.1151-2916.1997.tb02910.x ↗
10. Zhou M, Ahmad A (2007) Sensors Actuators B Chem 122:41910.1016/j.snb.2006.06.011 ↗
11. Lisdat F, Miura N, Yamazoe N (1996) Sensors Actuators B Chem 30:19510.1016/0925-4005(96)80049-9 ↗
12. Rodrigo JL, Alamo J (1991) Mater Res Bull 26:47510.1016/0025-5408(91)90187-Q ↗
13. Breval E, Harshé G, Agrawal DK, Limaye SY (1995) J Mater Sci Lett 14:728
14. Vaidhyanathan B, Agrawal DK, Roy R (2004) J Am Ceram Soc 87:83410.1111/j.1551-2916.2004.00834.x ↗
15. Vaidhyanathan B, Ganguli M, Rao KJ (1994) J Solid State Chem 113:44810.1006/jssc.1994.1395 ↗
16. Ghussn L, Martinelli JR (2004) J Mater Sci 39:1371. doi: 10.1023/B:JMSC.0000013899.75724.e110.1023/B:JMSC.0000013899.75724.e1 ↗
17. Chenu S, Lebullenger R, Rocherullé J (2010) J Mater Sci 45:6505. doi: 10.1007/s10853-010-4739-210.1007/s10853-010-4739-2 ↗
18. Shannon RD (1976) Acta Cryst A32:75110.1107/S0567739476001551 ↗
19. Chenu S, Rocherullé J, Lebullenger R, Merdrignac O, Cheviré F, Tessier F, Oudadesse H (2010) J Non Cryst Solid 356:8710.1016/j.jnoncrysol.2009.11.001 ↗
20. Muñoz F, Pascual L, Durán A, Rocherullé J, Marchand R (2006) J Eur Ceram Soc 26:145510.1016/j.jeurceramsoc.2005.02.019 ↗
21. Ray CS, Day DE (1990) J Am Ceram Soc 73:43910.1111/j.1151-2916.1990.tb06532.x ↗