Effect of abrasives on the glossiness and reflectance of anodized aluminum alloys
Source abstract
Abstract
Blasting can eliminate or change the surface texture of as-rolled aluminum alloy by indentation to roughen the alloy’s surface. We investigated the effects of the blasting conditions on the glossiness and reflectance of Al1050-H16 and Al5052-H32 alloys in this study. As-rolled sheets were blasted at various pressures, and then removed for sequential cleaning, chemical polishing, and anodizing steps. After each step the samples were measured by micro-TRI-gloss meter and spectrophotometer to compare the effects produced by the abrasive powders and processing variables. Polyhedral alumina and round iron powders were used as the blasting media. The glossiness (Gs(60°)) decreased as the root mean square roughness (Rq) increased, regardless of the shape of the abrasive powders. The abrasives powders could cause wear and/or fracturing during the blasting process as well as fine debris, which could become embedded in the blasted surface. When an aluminum alloy was blasted with iron powders, the glossiness value after alkaline etching and chemical polishing was greater than that after being blasted with alumina; while the anodized Al5052-H32 alloy’s surface became more yellowish in color.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Roughness and Optical Measurements · Advanced Surface Polishing Techniques · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Mulhall RC, Nedas ND (2002) Met Finish 100:9810.1016/S0026-0576(02)82009-8 ↗
2. Naidu NKR, Raman SGS (2005) Int J Fatigue 27:32310.1016/j.ijfatigue.2004.07.007 ↗
3. Harris AF, Beevers A (1999) Int J Adhes Adhes 19:44510.1016/S0143-7496(98)00061-X ↗
4. Yonehara M, Suzuki K, Kihara K, Kijika A, Isono H, Sugibayashi T (2003) J Jpn Inst Light Metals 53:16310.2464/jilm.53.163 ↗
5. Yonehara M, Suzuki K, Isono H, Kijika A, Sugibayashi T (2004) J Jpn Inst Light Metals 54:4510.2464/jilm.54.45 ↗
6. Yonehara M, Kihara K, Kagawa Y, Isono H, Sugibayashi T (2005) J Jpn Inst Light Metals 55:1510.2464/jilm.55.15 ↗
7. Yonehara M, Matsui T, Kihara K, Isono H, Kijika A, Sugibayashi T (2004) Mater Trans 45:102710.2320/matertrans.45.1027 ↗
8. Yonehara M, Kumai S, Isono H, Sugibayashi T, Igata N (2006) J Jpn Inst Light Metals 56:42910.2464/jilm.56.429 ↗
9. Boeckler GK (1995) Met Finish 93:2810.1016/0026-0576(95)90685-B ↗
10. Huang H, Li Y, Shen JY, Zhu HM, Xu XP (2002) J Mater Process Technol 129:40310.1016/S0924-0136(02)00702-1 ↗
11. Storer RA, Annual book of ASTM standards. American Society for Testing and Materials, Philadelphia, 06.01, p 120
12. Persson U (1998) Wear 215:5410.1016/S0043-1648(97)00279-2 ↗
13. McNeil JR, Wei LJ, Al-Jumaily GA, Shakir S, Mclver JK (1985) Appl Optics 24:48010.1364/AO.24.000480 ↗
14. Hass G (1955) J Opt Soc Am 45:94510.1364/JOSA.45.000945 ↗
15. Moon SM, Sakairi M, Takahashi H (2003) J Electrochem Soc 150:B47310.1149/1.1603248 ↗
16. Moon SM, Sakairi M, Takahashi H (2004) J Electrochem Soc 151:B39910.1149/1.1752933 ↗
17. Chatterjee B, Thomas RW, Dunstan GR (1977) Trans Inst Met Finish 55:3510.1080/00202967.1977.11870411 ↗
18. Hawkins DT, Hultgren R (1973) Metals handbook, 8th edn. Metals Park, Ohio, p 261
19. Xiao ZM, Fok WC, Lwin DT (1993) J Mater Process Technol 39:1310.1016/0924-0136(93)90004-P ↗