journal article·2011-03

Monoclinic effects and orthotropic estimation for the behaviour of rolled sheet

O. Chahaoui, M. L. Fares, D. Piot, F. Montheillet

Journal of Materials Science· Volume 46· Issue 6
Publisher page

Abstract

The crystallographic texture of an asymmetrically rolled sheet was investigated by electron back scattered diffraction (EBSD) and exhibited prismatic monoclinic symmetry. The parameters of the associated yield equation, derived from the quadratic orthotropic Hill criterion, were determined from the volume fractions of the texture components using the “Continuum Mechanics of Textured Polycrystals” (CMTP) approach. Two quantities are defined to assess the departure from orthotropy, and a method is proposed to find the “best” orthotropic estimation of the sheet behaviour. Results are first discussed on the basis of strain rate ratio predictions. Mechanical behaviour analysis of a sheet submitted to combined shear and compression (CSC) loading is also used to illustrate the method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Tóth LS (2009) Microstructure and texture in steels, Part III:22510.1007/978-1-84882-454-6_13 ↗
2. Engler O, Huh MY, Tome CN (2000) Metall Mater Trans A31:229910.1007/s11661-000-0146-7 ↗
3. Sidor J, Miroux A, Petrov R, Kestens L (2008) Acta Mater 56:249510.1016/j.actamat.2008.01.042 ↗
4. Kim JK, Jee YK, Huh MY, Jeong HT (2004) J Mater Sci 39:5365. doi: 10.1023/B:JMSC.0000039246.72708.0a10.1023/B:JMSC.0000039246.72708.0a ↗
5. Roumina R, Sinclair CW (2008) Metall Mater Trans 39:249510.1007/s11661-008-9582-6 ↗
6. Watanabe H, Mukai T, Ishikaw K (2004) J Mater Sci 39:1477. doi: 10.1023/B:JMSC.0000013922.16079.d310.1023/B:JMSC.0000013922.16079.d3 ↗
7. Hill R (1950) The mathematical theory of plasticity. Oxford University Press, Oxford
8. Bailey JA, Haas SL, Nawab KC (1971) J Basic Eng Trans ASME, Paper No. 71-Met-Y
9. Michino MJ Jr, Flindey WN (1974) J Eng Mater Technol Trans ASME 96:5610.1115/1.3443185 ↗
10. Stout MG, Hecker SS, Boursier R (1983) J Eng Mater Technol Trans ASME 105:24210.1115/1.3225653 ↗
11. Eisenberg MA, Yen CF (1984) J Eng Mater Technol Trans ASME 106:35510.1115/1.3225730 ↗
12. Helling DE, Miller AK, Stout MG (1987) J Eng Mater Techol Trans ASME 108:31310.1115/1.3225888 ↗
13. Kim KH (1992) J Mech Phys Solids 40:12710.1016/0022-5096(92)90282-7 ↗
14. Darrieulat M, Montheillet F (1996) Int J Mech Sci 38:127310.1016/0020-7403(96)00003-3 ↗
15. Wauthier A, Réglé H, Formigoni J, Herman G (2009) Mater Character 60:9010.1016/j.matchar.2008.07.004 ↗
16. Huh MY, Lee KR, Engler O (2004) Int J Plast 20:118310.1016/j.ijplas.2003.08.003 ↗
17. Lee AU, Kang ED, Kobayashi T (2003) In: 3rd International symposium on designing processing and properties of advanced engineering materials, South Korea, p 610.4028/b-U3rjO4 ↗
18. Lee AU, Lee DN (2001) Int J Mech Sci 43:199710.1016/S0020-7403(01)00025-X ↗
19. Sakai T, Yoneme T, Yoneda K, Saito Y (2003) In: 4th International conference on processing and manufacturing of advanced materials. University of Carlos III, Madrid, Spain, pp 426–424
20. Van Houtte P (1995) The MTM-FHM Software System, Version 2, users manual. Katholieke Universiteit, Leuven, Belgium
21. Chahaoui O (2010) Modélisation mécanique de l’anisotropie d’une tôle présentant un gradient de texture dans son épaisseur. PhD Thesis, Université d’Annaba, Algeria
22. De Paepe A, Herman JC, Leroy V (1997) Steel Res Int 68:47910.1002/srin.199701173 ↗
23. Montheillet F, Gilormini P, Jonas JJ (1985) Acta Metall 33:70510.1016/0001-6160(85)90035-5 ↗
24. Lequeu P (1986) Crystallographic and continuum yield surfaces for textured polycrystals. PhD Thesis, McGill University, Montréal
25. Lequeu P, Montheillet F, Jonas JJ (1985) Textures in non ferrous metals and alloys. AIME Symp Detroit, p 189
26. Lequeu P, Gilormini P, Montheillet F, Bacroix B, Jonas JJ (1987) Acta Metall 35:115910.1016/0001-6160(87)90063-0 ↗
27. Darrieulat M, Montheillet F (2003) Int J Plast 19:51710.1016/S0749-6419(01)00071-7 ↗
28. Darrieulat M (1993) Prévision du comportement plastique anisotrope des polycristaux texturés par la mécanique des milieux continus. PhD Thesis, Ecoles des Mines de Saint-Étienne et de Paris, France
29. Hill R (1948) Proc R Soc Lond A193:28110.1098/rspa.1948.0045 ↗