journal article·2012-03

Enhanced microwave dielectric properties of Ba0.40Sr0.60TiO3–Zr0.80Sn0.20TiO4 composite ceramics

Haitao Jiang, Jiwei Zhai, Mingwei Zhang, Xi Yao

Journal of Materials Science· Volume 47· Issue 6
Publisher page

Abstract

The (1−x) Ba0.40Sr0.60TiO3 (BST)−xZr0.80Sn0.20TiO4 (ZST) composite ceramics with x = 10, 20, 30, and 40 wt% were fabricated by conventional solid-state reaction method. With increasing of ZST content, the dielectric constant of composite ceramics was decreased and dielectric loss increases. The effect of ZnO addition to 70 wt% BST–30 wt% ZST composition on the microstructure and dielectric properties was investigated. The improvements in dielectric constant, dielectric loss, and microwave dielectric properties of composite ceramics can be achieved by ZnO addition. The sample with 98 wt% (70 wt% BST–30 wt% ZST)–2 wt%ZnO composition exhibits promising dielectric properties, with dielectric constant, loss tangent and tunability at 4 kV/mm, of 125, 0.0016 and 12%, at 10 kHz and room temperature. At ~2 GHz, it possesses a dielectric constant of 101 and a Q factor of 187, which makes it a good candidate for tunable microwave device applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Mueller CH, Romanofsky RR, Miranda A (2001) IEEE Potentials 20:3610.1109/45.954657 ↗
2. Cui JD, Dong GX, Yang ZM, Du J (2010) J Alloys Compd 490:35310.1016/j.jallcom.2009.09.185 ↗
3. Keis VN, Kozyrev AB, Khazov ML, Sok J, Lee JS (1998) Electron Lett 34:110710.1049/el:19980784 ↗
4. Yu Z, Ang C, Guo RY, Bhalla AS (2002) J Appl Phys 92:148910.1063/1.1487435 ↗
5. Jiang HT, Zhai JW, Zhang JJ, Yao X (2009) J Am Ceram Soc 92:231910.1111/j.1551-2916.2009.03226.x ↗
6. Sengupta LC, Sengupta S (1999) Mater Res Innov 2:27810.1007/s100190050098 ↗
7. Feteira A, Sinclair DC, Reaney IM, Somiya Y, Lanagan MT (2004) J Am Ceram Soc 87:108210.1111/j.1551-2916.2004.01082.x ↗
8. Chang W, Sengupta L (2002) J Appl Phys 92:394110.1063/1.1505669 ↗
9. Wang XH, Lu WZ, Liu J, Zhou YL, Zhou DX (2006) J Eur Ceram Soc 26:198110.1016/j.jeurceramsoc.2005.09.092 ↗
10. Wang JL, Trolier-McKinstry S (2006) Appl Phys Lett 89:17290610.1063/1.2364127 ↗
11. Zhou K, Boggs SA, Ramprasad R, Aindow M, Erkey C, Alpay SP (2008) Appl Phys Lett 93:10290810.1063/1.2982086 ↗
12. Chou XJ, Zhai JW, Yao X (2007) Appl Phys Lett 91:12290810.1063/1.2784202 ↗
13. Pamu D, Rao GLN, Raju KCJ (2009) J Alloys Compd 475:74510.1016/j.jallcom.2008.07.136 ↗
14. Arantes VL, Souza DPF (2005) Mater Sci Eng A 398:22010.1016/j.msea.2005.03.011 ↗
15. McQuarrie M, Behnke FW (1954) J Am Ceram Soc 37:53910.1111/j.1151-2916.1954.tb13986.x ↗
16. Schmidt G (1990) Phase Trans 20:12710.1080/01411599008206872 ↗
17. Corker DL, Whatmore R, Ringgaand WE, Wolny WW (2000) J Eur Ceram Soc 20:203910.1016/S0955-2219(00)00089-3 ↗
18. Koerfer S, Souza RAD, Yoo H, Martin M (2008) Solid State Sci 10:72510.1016/j.solidstatesciences.2007.06.017 ↗
19. Baskaran N, Chang H (2001) J Mater Sci Mater El 12:52710.1023/A:1012453526652 ↗
20. Caballero AC, Fernandez JF, Moure C, Duran P, Chiang Y (1998) J Am Ceram Soc 81:93910.1111/j.1151-2916.1998.tb02430.x ↗
21. Caballero AC, Fernandez JF, Moure C, Duran P (1997) J Eur Ceram Soc 17:51310.1016/S0955-2219(96)00096-9 ↗
22. Choy JH, Han YS, Hwang SH (1998) J Am Ceram Soc 12:319710.1111/j.1151-2916.1998.tb02756.x ↗