journal article·2002-07

Effect of microstructure and γ′ precipitate from undercooled DD3 superalloy on mechanical properties

Feng Liu, Gencang Yang

Journal of Materials Science· Volume 37· Issue 13
Publisher page

Abstract

The mechanical properties of DD3 superalloy solidified at various undercoolings were measured to investigate the effects of γ′ precipitate and microstructure on alloy properties. The influence of melt undercooling on the γ′ precipitation is also studied. It is found that not only the size of γ′ particle, but its distribution in the as-solidified structure is also drastically controlled by the melt undercooling. The analysis indicates that alloy solidified at a low undercooling is brittle, thus leading to a lower toughness and tensile strength. With increasing undercooling, the toughness and strength of the alloy increased accordingly, which may be attributed to the strengthening effect of γ′ precipitate and the reduced micro-segregation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. E. NEMBACH and G. NEITE, Prog. Mater. Sci. 29 (1985) 177.10.1016/0079-6425(85)90001-5 ↗
2. G. R. STOECKINGER and J. P. NEUMANN, J. Appl. Crystallogr. 3 (1970) 32.10.1107/S0021889870005605 ↗
3. P. CARON and T. KHAN, Mater. Sci. Eng. 61 (1983) 173.10.1016/0025-5416(83)90199-4 ↗
4. B. LUX, G. HAOUR and F. MOLLARD, Metall. 35 (1981) 1235.
5. J. STANESCU and P. R. SAHM, Ing.-Werkst. 2 (1990) 64.
6. I. A. WANGER and P. R. SAHM, in“Superalloy 1996,” edited by R. D. Kissinger, D. J. Deye, D. L. Anton, et al. (The Minerals. Metals. & Materials Society, 1996) p. 497.
7. F. LIU, X. F. GUO and G. C. YANG, Mater. Sci. Eng. 291(2000) 9.10.1016/S0921-5093(00)00985-0 ↗
8. Idem., J. Mater. Sci. Lett. 19 (2000) 2065.10.1023/A:1026704212413 ↗
9. F. LIU, X. F. GUO and G. C. YANG, Materials Research Bulletin 36 (2001) 181.10.1016/S0025-5408(00)00468-2 ↗
10. X. F. GUO, Ph.D thesis, Northwestern Polytechnical University, 1999.
11. F. LIU, X. F. GUO and G. C. YANG, J. Crystal Growth 219 (2000) 489.10.1016/S0022-0248(00)00759-4 ↗
12. F. LIU, D. W. ZHAO and G. C. YANG, Metall. Mater. Trans. 32B (2001) 449.10.1007/s11663-001-0030-x ↗
13. W. J. BOETTINGER, S. R. CORIELL and R. TRIVEDI, “Rapid Solidification Processing: Principles and Technologies IV,” edited by R. Meharabian and P. A. Parrish (Claitor's, Baton Rouge, LA, 1988) p. 13.
14. M. J. AZIZ, Metall. Mater. Trans. 27A (1996) 671.10.1007/BF02648954 ↗
15. X. P. GUO, Ph.D thesis, Northwestern Polytechnical University, 1992.