Fabrication and characterization of FePt magnetic nanofibers via electrospinning technique
Source abstract
Abstract
L10-structured platinum–iron (FePt) nanofibers were successfully synthesized by electrospinning technique, followed by calcination and reduction processes. In the preparation procedure, ferrous chloride tetrahydrate [Fe(Cl)2⋅4H2O] and iron nitrate nonahydrate [Fe(NO3)3⋅9H2O] were, respectively, used as iron sources contained in precursor solution for electrospinning. Subsequently, the FePt nanofibers were obtained from the calcination in air and the followed reduction in hydrogen (H2) of the as-spun FePt/PVP composite nanofibers. The FePt nanofibers were characterized by X-ray diffractometer, scanning electron microscopy, transmission electron microscopy, and superconducting quantum interference device magnetometry. It was found that the different iron salt used in the spinning solutions could highly affect the FePt nanofiber morphology, crystallite size, and the magnetic properties. The FePt nanofibers, resulted from the spinning solution containing iron dichloride tetrahydrate, were of better crystallinity and well-defined fibrous morphology with an average diameter of about 110 nm. Additionally, the considerably large coercivity of 10.27 kOe was recorded from the above FePt nanofibers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Supercapacitor Materials and Fabrication · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Cagnon L, Dahmane Y, Voiron J, Pairis S, Bacia M, Ortega L, Benbrahim N, Kadri A (2007) Electrodeposited CoPt and FePt alloys nanowires. J Magn Magn Mater 310:2428–2430. doi: 10.1016/j.jmmm.2006.10.90210.1016/j.jmmm.2006.10.902 ↗
2. Dahmane Y, Cagnon L, Voiron J, Pairis S, Bacia M, Ortega L, Benbrahim N, Kadri A (2006) Magnetic and structural properties of electrodeposited CoPt and FePt nanowires in nanoporous alumina templates. J Phys D 39:4523–4528. doi: 10.1088/0022-3727/39/21/00110.1088/0022-3727/39/21/001 ↗
3. Khurshid H, Huang YH, Bonder MJ, Hadjipanayis GC (2009) Microstructural and magnetic properties of CoPt nanowires. J Magn Magn Mater 321:277–280. doi: 10.1016/j.jmmm.2008.09.00210.1016/j.jmmm.2008.09.002 ↗
4. Wang H, Jia E, Zhang L, Li L, Li M (2008) On low-temperature ordering of FePt nanowires. Phys Lett A 372:5712–5715. doi: 10.1016/j.physleta.2008.07.02610.1016/j.physleta.2008.07.026 ↗
5. Hou Y, Kondoh H, Che R, Takeguchi M, Ohta T (2006) Ferromagnetic FePt nanowires: solvothermal reduction synthesis and characterization. Small 2:235–238. doi: 10.1002/smll.20050032810.1002/smll.200500328 ↗
6. Xu JP, Zhang ZZ, Ma B, Jin QY (2011) Compositional control of FexPt(1−x) nanowires by electrodeposition. J Appl Phys 109:07B704. doi: 10.1063/1.353794110.1063/1.3537941 ↗
7. Che RC, Takeguchi M, Shimojo M, Zhang W, Furuya K (2005) Fabrication and electron holography characterization of FePt alloy nanorods. Appl Phys Lett 87:223109. doi: 10.1063/1.213607110.1063/1.2136071 ↗
8. Chen M, Pica T, Jiang YB, Li P, Yano K, Liu JP, Datye AK, Fan H (2007) Synthesis and self-assembly of fcc phase FePt nanorods. J Am Chem Soc 129:6348–6349. doi: 10.1021/ja069057x10.1021/ja069057x ↗
9. Jo E, Yeo JG, Kim DK, Oh JS, Hong CK (2014) Preparation of well-controlled porous carbon nanofiber materials by varying the compatibility of polymer blends. Polym Int 63:1471–1477. doi: 10.1002/pi.464510.1002/pi.4645 ↗
10. Li D, Xia Y (2004) Direct fabrication of composite and ceramic hollow nanofibers by electrospinning. Nano Lett 4:933–938. doi: 10.1021/nl049590f10.1021/nl049590f ↗
11. Dong J, Zhang Y, Zhang X, Liu Q, Wang J (2014) Improved magnetic properties of SrFe12O19/FeCo core–shell nanofibers by hard/soft magnetic exchange–coupling effect. Mater Lett 120:9–12. doi: 10.1016/j.matlet.2014.01.02210.1016/j.matlet.2014.01.022 ↗
12. Mou F, Guan JG, Shi W, Sun Z, Wang S (2010) Oriented contraction: a facile nonequilibrium heat-treatment approach for fabrication of maghemite fiber-in-tube and tube-in-tube nanostructures. Langmuir 26:15580–15585. doi: 10.1021/la102830p10.1021/la102830p ↗
13. Zhao Y, Cao X, Jiang L (2007) Bio-mimic multichannel microtubes by a facile method. J Am Chem Soc 129:764–765. doi: 10.1021/ja068165g10.1021/ja068165g ↗
14. Chen H, Wang N, Di J, Zhao Y, Song Y, Jiang L (2010) Nanowire-in-microtube structured core/shell fibers via multifluidic coaxial electrospinning. Langmuir 26:11291–11296. doi: 10.1021/la100611f10.1021/la100611f ↗
15. Wang X, Ding B, Yu J, Wang M (2011) Engineering biomimetic superhydrophobic surfaces of electrospun nanomaterials. Nano Today 6:510–530. doi: 10.1016/j.nantod.2011.08.00410.1016/j.nantod.2011.08.004 ↗
16. Li D, Xia Y (2004) Electrospinning of nanofibers: reinventing the wheel? Adv Mater 16:1151–1170. doi: 10.1002/adma.20040071910.1002/adma.200400719 ↗
17. Chi X, Pan W, Tan G, Li F, Wang J (2012) Method for analyzing the magnetic anisotropy in non-aligned Fe nanofibers via electrospinning. Mater Lett 82:78–81. doi: 10.1016/j.matlet.2012.05.06110.1016/j.matlet.2012.05.061 ↗
18. Graeser M, Bognitzki M, Massa W, Pietzonka C, Greiner A, Wendorff JH (2007) Magnetically anisotropic cobalt and iron nanofibers via electrospinning. Adv Mater 19:4244–4247. doi: 10.1002/adma.20070084910.1002/adma.200700849 ↗
19. Khalil A, Singh Lalia B, Hashaikeh R, Khraisheh M (2013) Electrospun metallic nanowires: synthesis, characterization, and applications. J Appl Phys 114:171301. doi: 10.1063/1.482248210.1063/1.4822482 ↗
20. Cheng W, Yu Q, Qiu Z, Yan Y (2013) Effects of different ionic liquids on the electrospinning of a polyacrylonitrile polymer solution. J Appl Polym Sci 103:2359–2368. doi: 10.1002/APP.3927510.1002/app.39275 ↗
21. Qin X, Yang E, Li N, Wang S (2007) Effect of different salts on electrospinning of polyacrylonitrile (PAN) polymer solution. J Appl Polym Sci 103:3865–3870. doi: 10.1002/app.2549810.1002/app.25498 ↗
22. Gibbons WT, Liu TH, Gaskell KJ, Jackson GS (2014) Characterization of palladium/copper/ceria electrospun fibers for water–gas shift catalysis. Appl Catal B 160–161:465–479. doi: 10.1016/j.apcatb.2014.06.00110.1016/j.apcatb.2014.06.001 ↗
23. Anitha S, John TD, Natarajan TS (2011) A study on defect controlled morphology of organic/inorganic composite nanofibers with different heat flow rates. Mater Lett 65:167–170. doi: 10.1016/j.matlet.2010.09.07010.1016/j.matlet.2010.09.070 ↗
24. Saensuk O, Phokha S, Bootchanont A, Maensiri S, Swatsitang E (2015) Fabrication and magnetic properties of NiFe2O4 nanofibers obtained by electrospinning. Ceram Int 41:8133–8141. doi: 10.1016/j.ceramint.2015.03.01910.1016/j.ceramint.2015.03.019 ↗
25. Wu H, Zhang R, Liu X, Lin D, Pan W (2007) Electrospinning of Fe Co, and Ni nanofibers: synthesis, assembly, and magnetic properties. Chem Mater 19:3506–3511. doi: 10.1021/cm070280i10.1021/cm070280i ↗
26. Shanker R (1990) Crystallization of acicular platelet particles of W-type hexagonal strontium ferrite for magnetic recording applications. J Mater Sci 25:2465–2470. doi: 10.1007/BF0063804310.1007/BF00638043 ↗
27. Liu M, Shen X, Song F, Xiang J, Meng X (2010) One-dimensional SrFe12O19/SrSiO3 composite nanofibers: preparation, structure and magnetic properties. Mater Chem Phys 124:970–975. doi: 10.1016/j.matchemphys.2010.08.00510.1016/j.matchemphys.2010.08.005 ↗
28. Li CJ, Huang BN, Wang JN (2012) Effect of aluminum substitution on microstructure and magnetic properties of electrospun BaFe12O19 nanofibers. J Mater Sci 48:1702–1710. doi: 10.1007/s10853-012-6928-7
29. Li Q, Wang W, Wang Y (2010) Fabrication and characterization of Ni0.5Zn0.5Fe2O4 nanofibers. J Alloys Compd 494:315–318. doi: 10.1016/j.jallcom.2010.01.02110.1016/j.jallcom.2010.01.021 ↗
30. Shen X, Liu M, Song F, Meng X (2010) Structural evolution and magnetic properties of SrFe12O19 nanofibers by electrospinning. J Sol-Gel Sci Technol 53:448–453. doi: 10.1007/s10971-009-2119-710.1007/s10971-009-2119-7 ↗
31. Christodoulides JA, Zhang Y, Hadjipanayis GC, Fountzoulas C (2000) CoPt and FePt nanoparticles for high density recording media. IEEE Trans Magn 36:2333–2335. doi: 10.1109/20.90842010.1109/20.908420 ↗
32. Hyun C, Lee DC, Korgel BA, Lozanne AD (2007) Micromagnetic study of single-domain FePt nanocrystals overcoated with silica. Nanotechnology 18:055704. doi: 10.1088/0957-4484/18/5/05570410.1088/0957-4484/18/5/055704 ↗
33. da Silva TL, Varanda LC (2011) Perpendicularly self-oriented and shape-controlled L10-FePt nanorods directly synthesized by a temperature-modulated process. Nano Res 4:666–674. doi: 10.1007/s12274-011-0122-010.1007/s12274-011-0122-0 ↗
34. Wang C, Hou Y, Kim J, Sun S (2007) A general strategy for synthesizing FePt nanowires and nanorods. Angew Chem Int Ed 46:6333–6335. doi: 10.1002/anie.20070200110.1002/anie.200702001 ↗
35. Li N, Hu Z, Zheng M, Lu H, Zhao B, Zhang S, Zheng J, Ji G, Cao J (2013) Formation of Pt nanoparticles in mesoporous silica channels via direct low-temperature decomposition of H2PtCl6·6H2O. Mater Lett 106:193–196. doi: 10.1016/j.matlet.2013.05.00710.1016/j.matlet.2013.05.007 ↗
36. Fu J, Zhang J, Zhao C, Peng Y, Li X, He Y, Zhang Z, Pan X, Mellors NJ, Xie E (2013) Solvent effect on electrospinning of nanotubes: the case of magnesium ferrite. J Alloys Compd 577:97–102. doi: 10.1016/j.jallcom.2013.04.17710.1016/j.jallcom.2013.04.177 ↗