journal article·2004-12

Effects of the variation in α-phase volume fraction on the thermal stability of TiAl alloys with a lamellar microstructure

S. W. Kim, H. N. Lee, M. H. Oh, D. M. Wee

Journal of Materials Science· Volume 39· Issue 23
Publisher page

Abstract

The thermal stability of two-phase (alpha + gamma) lamellar microstructure in Ti-Al-Mo PST (polysynthetically twinned that has single colony) crystals, containing C or Si, was investigated. In addition, the variation of a-phase volume fraction in Ti-Al-Mo-(C,Si) systems was investigated at several temperatures. Ti-46Al-1.5Mo-0.2C and Ti-46Al-1.5Mo-1.0Si alloys did not recrystallized (stable in this paper) during heat treatments at various heating rates and temperatures. Moreover, the a-phase volume fractions of Ti-46Al-1.5Mo-0.2C and Ti-46Al-1.5Mo-1.0Si alloys which were stable compositions, changed less than those of Ti-47Al and Ti-46Al-1.5Mo alloys which were unstable compositions. The instability of the latter alloys was caused by their relatively higher variation of a-phase volume fraction during heating. Therefore, it is suggested that the variation of a-phase volume fraction is an important factor in controlling the thermal stability of lamellar microstructure. (C) 2004 Kluwer Academic Publishers. ; 신소재공학과
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Y.-W. Kim, JOM 46 (1994) 30.10.1007/BF03220745 ↗
2. M. Yamaguchi and H. Inui, in "Structural Intermetallics," edited by R. Darolia et al. (TMS, Champion, PA, 1993) p. 127.
3. K. Kishida, D. R. Johnson, Y. Masuda, H. Umeda, H. Inui and M. Yamaguchi, Intermetallics 6(1998) 679.10.1016/S0966-9795(98)00055-7 ↗
4. H. N. Lee, D. R. Johnson, H. Inui, M. H. Oh, D. M. Wee and M. Yamaguchi, Acta Mater. 48 (2000) 3221.10.1016/S1359-6454(00)00123-3 ↗
5. Idem., edited by Y-W Kim, D. M. Dimiduk and M. H. Loretto (TMS, Warrendale, PA, 1999) p. 309.
6. Idem., Mater. Sci. Eng.A 329–331C (2002) 19.10.1016/S0921-5093(01)01495-2 ↗
7. D. R. Johnson, H. Inui and M. Yamaguchi, Acta Mater. 44 (1996) 2523.10.1016/1359-6454(95)00338-X ↗
8. D. R. Johnson, Y. Masuda, H. Inui and M. Yamaguchi, ibid. 45 (1997) 2523.10.1016/S1359-6454(96)00335-7 ↗
9. M. C. Kim, D. M. Wee, M. H. Oh, J. H. Lee, H. Inui and M. Yamaguchi, Mater. Sci. Eng.A 239/240 (1997) 570.10.1016/S0921-5093(97)00632-1 ↗
10. I. S. Jung, M. C. Kim, J. H. Lee, M. H. Oh and D. M. Wee, Intermetallics 7 (1999) 1247.10.1016/S0966-9795(99)00031-X ↗
11. I. S. Jung, H. S. Jang, M. H. Oh, J. H. Lee and D. M. Wee, Mater. Sci. Eng.A 329–331 (2002) 13.10.1016/S0921-5093(01)01494-0 ↗
12. D. R. Johnson, Y. Masuda, T. Yamanaka, H. Inui and M. Yamaguchi, Metall. Mater. Trans. A31A (2000) 2463.10.1007/s11661-000-0192-1 ↗
13. D. R. Johnson, H. N. Lee, S. Muto, T. Yamanaka, H. Inui and M. Yamaguchi, Intermetallics 9 (2001) 923.10.1016/S0966-9795(01)00091-7 ↗
14. C. T. Liu, J. H. Schneibel, P. J. Maziasz, J. L. Wright and D. S. Easton, ibid. 4 (1996) 429.10.1016/0966-9795(96)00047-7 ↗
15. A. K. Singh and D. Banerjee, Metall. Mater. Trans.A 28(1997) 1735.10.1007/s11661-997-0105-7 ↗
16. J. N. Wang and K. Xie, Scr. Metall. 43 (2000) 441.10.1016/S1359-6462(00)00419-X ↗
17. H. Okamoto, J. Phase Equilibria 14 (1993) 120.10.1007/BF02652171 ↗
18. B. Manesh and A. Flower, Mater. Sci. Tech. 10 (1994) 674.10.1179/mst.1994.10.8.674 ↗
19. F. Perdrix, M.-F. Trichet, J.-L. Bonnentien, M. Cornet and J. Bigot, Intermetallics 9 (2001) 807.10.1016/S0966-9795(01)00066-8 ↗
20. X.-W. Du, J. N. Wang and J. Zhu, ibid. 9 (2001) 745.10.1016/S0966-9795(01)00041-3 ↗
21. W. R. Chen, J. Beddoes and L. Zhao, Mater. Sci. Eng.A 323 (2002) 306.10.1016/S0921-5093(01)01391-0 ↗