Microstructural characterization of γ-TiAl base alloy by electron probe x-ray microanalysis and electron backscatter diffraction
Source abstract
Abstract
Electron backscatter diffraction (EBSD) and electron probe x-ray microanalysis (EPMA) in combination with x-ray diffraction (XRD) were applied for phase identification of the ternary precipitates and accompanying phases in Ti-49.6Al-1.9Fe alloy after heat treatment at 1400°C followed by furnace cooling. The heat treatment resulted in formation of the duplex structure consisting of equiaxed grains of the γ phase (AuCu type) and lamellae of the γ and α2 (Ni3Sn type). The ternary τ2 (Mn23Th6 type) phase, containing 21–22 at. % Fe, was revealed on the grain boundaries of the γ-matrix and lamellae, and is accompanied by α2 precipitates. Different morphologies of the τ2 + α2 colonies were found to differ in chemical composition, coarse particles being depleted in titanium, and the fine particles enriched in it. The combination of EPMA and EBSD in scanning electron microscopy proved to be very effective in local phase identification of specimens with fine multiphase structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. F. H. Froes, C. Surynarayna and D. Eliezer, Journal of Materials Science 27 (1992) 5113.10.1007/BF02403806 ↗
2. Y-W. Kim and F. H. Froes in “High Temperature Aluminides and Intermetallics” edited by S. H. Whang, C. T. Liu, D. P. Pope and O. J. Stiegler (TMS Warrendale, Pennsylvania, 1990) p. 465.
3. J. Beddoes et al., International Materials Reviews 40 (1995) 197.10.1179/imr.1995.40.5.197 ↗
4. Sh.-Ch. Huang, in “Structural Intermetallics,” edited by R. Darolia, et al., (The Minerals, Metals & Materials Society, 1993) p. 167.
5. S. A. Jones and M. J. Kaufman, Acta Metall. Mater. 41 (1993) 387.10.1016/0956-7151(93)90069-5 ↗
6. Sh.-Ch. Huang, Metallurgical Transactions A 23A (1992) 375.10.1007/BF02660879 ↗
7. M. Palm, G. Inden and N. Thomas, Journal of Phase Equilibria 16 (1995) 209.10.1007/BF02667305 ↗
8. M. Palm, A. Gorzel, D. Letzig and G. Sauthoff, in “Structural Intermetallic,” edited by M.V. Nathal et al., (The Minerals, Metals & Materials Society, 1997) 885.
9. D. J. Dingley and V. Randle, Journal of Materials Science 27 (1992) 4545.10.1007/BF01165988 ↗
10. Link Opal Operator's Guide. Oxford Instruments, Microanalysis Group, Issue 1 1995).
11. D. J. Dingley, K. Z. Baba-Kishi and V. Randle, “Atlas of Backscattering Kikuchi Diffraction Patterns, Microscopy in Materials Science Series” (Institute of Physics Publishing, Bristol and Philadelphia, 1995).
12. P. Villars and L. D. Calvert, “Pearson's Hamdbook of Crystallographic Data for Intermetallic Phases,” Vol. 2 (American Society of Metals, Metals Park Ohio, 1985) p. 1075.
13. “Phase Diagrams of Binary Titanium Alloys,” edited by J. L. Murray (Metals Park, Ohio 44073, 1987) p. 12.
14. L. Levin, A. Tokar, M. Talianker and E. Evangelista, Intermetallics 7 (1999) 1317.10.1016/S0966-9795(99)00009-6 ↗