journal article·2006-06

Phase formation and texture development in mullite/zirconia composites fabricated by templated grain growth

C. Duran, Y. K. Tür

Journal of Materials Science· Volume 41· Issue 11
Publisher page

Abstract

Mullite is a promising candidate for advanced ceramic applications but its low fracture toughness and difficulties in sintering are the main limitations for more widespread industrial applications. Therefore, mullite/zirconia composites were prepared from a reactive mixture of alumina and zircon powders. Additives, TiO2 and MgO, were used to modify aluminosilicate glass to increase densification and aluminum borate templates were incorporated to texture mullite in [001] by templated grain growth. Mullite/zirconia phase formation was complete at 1450°C in the presence of both templates and additives, as compared to 1500°C for the samples with only additives and to 1600°C for the samples with only templates. Dense mullite/zirconia composites with highly -textured mullite grains (Lotgering factor ∼1) and a retention of ∼13% tetragonal ZrO2 were fabricated after sintering at 1450°C for 2 h. A high quality of mullite texture with a degree of orientation parameter of 0.22 and a narrow distribution of elongated mullite grains within 8.8° around [001] were successfully obtained in the composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. T. I. MAH and K. S. MAZDIYASNI, J. Am. Ceram. Soc. 66 (1983) 699.10.1111/j.1151-2916.1983.tb10532.x ↗
2. I. A. AKSAY, D. M. DABBS and M. SARIKAYA, ibid. 74 (1991) 2343.10.1111/j.1151-2916.1991.tb06768.x ↗
3. R. TORRECILLAS, G. FANTOZZI, S. DE AZA and J. S. MOYA, Acta Mater. 45 (1997) 897.10.1016/S1359-6454(96)00226-1 ↗
4. P. D. D. RODRIGO and P. BOCH, Int. J. High Tech. Ceram. 1 (1985) 3.10.1016/0267-3762(85)90022-0 ↗
5. K. A. KHOR, L. G. YU, Y. LI, Z. L. DONG, Z. A. MUNIR, Mat. Sci. Eng. A339 (2003) 286.10.1016/S0921-5093(02)00151-X ↗
6. N. CLAUSSEN and J. JAHN, J. Am. Ceram. Soc. 63 (1980) 228.10.1111/j.1151-2916.1980.tb10700.x ↗
7. P. BOCH and T. CHARTIER, ibid. 74 (1991) 2448.10.1111/j.1151-2916.1991.tb06783.x ↗
8. P. PENA, P. MIRANZO, J. S. MOYA and S. DE AZA, J. Mater. Sci. 20 (1985) 2011.10.1007/BF01112284 ↗
9. P. MIRANZO, P. PENA, J. S. MOYA and S. DE AZA, ibid. 20 (1985) 2702.10.1007/BF00553031 ↗
10. M. F. MELO, J. S. MOYA, P. PENA and S. DE AZA, ibid. 20 (1985) 2711.10.1007/BF00553032 ↗
11. M. SEABAUGH, Ph. D. Thesis, The Pennsylvania State University (1998).
12. G. L. MESSING, E. M. SABOLSKY, S. TROLIER-MCKINSTRY, C. DURAN, S. KWON, B. BRAHMAROUTU, P. PARK, H. YILMAZ, P. W. REHRIG, K. B. EITEL, E. SUVACI and M. SEABAUGH, Criti. Rev. Solid State Mater. Sci. 29 (2004) 45.10.1080/10408430490490905 ↗
13. P. DESCAMPS, S. SAKAGUCHI, M. POORTEMAN and F. CAMBIER, J. Am. Ceram. Soc. 74 (1991) 2476.10.1111/j.1151-2916.1991.tb06788.x ↗
14. F. CAMBIER, C. BAUDIN, P. PILATE and A. LERICHE, Br. Ceram. Trans. 83 (1984) 196.
15. T. KOYAMA, S. HAYASHI, A. YASUMORI, K. OKADA, M. SCHMUCKER and H. SCHNEIDER, J. Eur. Cer. Soc. 16 (1996) 231.10.1016/0955-2219(95)00142-5 ↗
16. J. M. WU and C. M. LIN, J. Mater. Sci. 26 (1991) 4631.10.1007/BF00612398 ↗
17. Y.-J. LIN, J. Mater. Res. 14 (1999) 916.10.1557/JMR.1999.0123 ↗
18. M. IHARA, K. IMAI, J. FUKUNAGA and N. YOSHIDA, J. Ceram. Soc. Jpn. 78 (1980) 1014
19. J. YLA-JAASKI and H.-U. NISSEN, Phys. Chem. Minerals. 10 (1983) 47.10.1007/BF00309584 ↗
20. S.-H. HONG and G. L. MESSING, J. Am. Ceram. Soc. 80 (1997) 1551.10.1111/j.1151-2916.1997.tb03015.x ↗
21. I. E. GONENLI and G. L. MESSING, J. Eur. Cer. Soc. 21 (2001) 2495.10.1016/S0955-2219(01)00270-9 ↗
22. S.-H. HONG and G. L. MESSING, J. Am. Ceram. Soc. 82 (1999) 867.10.1111/j.1151-2916.1999.tb01847.x ↗
23. Y. HIRATA, S. MATSUSHITA, Y. ISHIHARA and H. KATSUKI, J. Am. Ceram. Soc. 74 (1991) 2438.10.1111/j.1151-2916.1991.tb06781.x ↗
24. C. NISCHIK, M. M. SEIBOLD, N. A. TRAVITZKY and N. CLAUSSEN, ibid. 74 (1991) 2464.10.1111/j.1151-2916.1991.tb06786.x ↗
25. C. DURAN and Y. K. TUR, Mater. Lett. 59 (2005) 245.10.1016/j.matlet.2004.07.058 ↗
26. F. K. LOTGERING, J. Inorg. Nucl. Chem. 9 (1959) 113.10.1016/0022-1902(59)80070-1 ↗
27. M. M. SEABAUGH, M. D. VAUDIN, J. P. CLINE, and G. L. MESSING, J. Am. Ceram. Soc. 83 (2000) 2049.10.1111/j.1151-2916.2000.tb01510.x ↗
28. M. D. VAUDIN, “TexturePlus”, National Inst. of Std. and Tech., Ceramics Division, Gaithersburg, MD, USA.
29. A. MARCH, Z. Kristallogr. 81 (1932) 285.10.1524/zkri.1932.81.1.285 ↗
30. W. A. DOLLASE, J. Appl. Cryst. 19 (1986) 267.10.1107/S0021889886089458 ↗
31. M. D. SACKS, Y.-J. LIN, G. W. SCHEIFFELE, K. WANG and N. BOZKURT, J. Am. Ceram. Soc. 78 (1995) 2897.10.1111/j.1151-2916.1995.tb09061.x ↗
32. J. C. HULING and G. L. MESSING, ibid. 74 (1991) 2374.10.1111/j.1151-2916.1991.tb06771.x ↗
33. S.-K. ZHAO, Y. HUANG, C.-A. WANG, X.-X. HUANG and J.-K. GUO, Mater. Lett. 57 (2003) 1716.10.1016/S0167-577X(02)01057-1 ↗
34. N. P. BANSAL and R. H. DOREMUS, “Handbook of Glass Properties” (Academic Press, New York, 1986)
35. S.-H. HONG and G. L. MESSING, J. Am. Cream. Soc. 81 (1998) 1269.10.1111/j.1151-2916.1998.tb02478.x ↗
36. K. A. KHOR and Y. LI, Mat. Sci. and Eng. A256 (1998) 271.10.1016/S0921-5093(98)00807-7 ↗
37. S.-K. ZHAO, Y. HUANG, C.-A. WANG, X.-X. HUANG and J.-K. GUO, Ceram. Int. 29 (2003) 49.10.1016/S0272-8842(02)00088-3 ↗
38. S. K. ZHAO, X. X. HUANG and J. K. GUO, J. Mater. Sci. Lett. 19 (2000) 707.10.1023/A:1006779131765 ↗
39. “Handbook of Chemistry and Physics” (CRC Press, Boca Raton, FL, USA, E53, 1985/1986) 66th edn.
40. N.-L. WU, T.-F. WU and I. A. RUSAKOVA, J. Mater. Res. 16 (2001) 666.10.1557/JMR.2001.0114 ↗
41. V. YAROSHENKO and D. S. WILKINSON, J. Am. Ceram. Soc. 84 (2001) 850.10.1111/j.1151-2916.2001.tb00751.x ↗
42. R. C. GARVIE and P. S. NICHOLSON, ibid. 55 (1972) 303.10.1111/j.1151-2916.1972.tb11290.x ↗
43. T. M. KYAW, Y. OKAMOTO and K. HAYASHI, J. Mat. Sci. 32 (1997) 5497.10.1023/A:1018608004287 ↗
44. P. F. BECHER and M. V. SWAIN, J. Am. Ceram. Soc. 75 (1992) 493.10.1111/j.1151-2916.1992.tb07832.x ↗
45. V. S. NAGARAJAN and K. J. RAO, J. Mater. Sci. 24 (1989) 2140.10.1007/BF02385434 ↗
46. S. W. WANG, X. X. HUANG and J. K. GUO, ibid. 32 (1997) 197.10.1023/A:1018556006201 ↗
47. R. L. FULLMAN, J. Metals. (1953) 447.10.1007/BF03398971 ↗
48. K. DAS, B. MUKHERJEE and G. BANERJEE, J. Eur. Ceram Soc. 18 (1998) 1771.10.1016/S0955-2219(98)00095-8 ↗
49. T. EBADZADEH and E. GHASEMI, Mat. Sci. Eng. A283 (2000) 289.10.1016/S0921-5093(99)00631-0 ↗
50. S. YANGYUN and R. J. BROOK, Sci. Sinter. 17 (1985) 35.
51. D. MICHEL, L. MAZEROLLES and R. PORTIER, Ceram. Trans. 6 (1990) 435.
52. K. OKADA and N. OTUSKA, J. Am. Ceram. Soc. 74 (1991) 2414.10.1111/j.1151-2916.1991.tb06778.x ↗
53. J. YLA-JAASKI and H.-U. NISSEN, Phys. Chem. Miner. 10 (1983) 47.10.1007/BF00309584 ↗