The development of voidage and capillary size within extruded plastic films
Source abstract
Abstract
This paper describes how both capillary diameter and voidage can be manipulated by downstream mechanical processing of plastic microcapillary films (MCFs). MCFs are a novel thermoplastic extrudate that have been manufactured by the entrainment of gas within nozzles positioned in an extrusion die; the film resembles a plastic tape but contains an array of equally spaced parallel microcapillaries that run along its entire length. The low-voidage MCFs manufactured from linear low density polyethylene were made by melt drawing the polymer to produce an essentially isotropic MCF. This MCF could then be subsequently mechanically drawn to form small diameter MCFs. By altering process conditions an anisotropic high voidage MCF was produced. This MCF was brittle when drawn in the capillary direction but showed unusual mechanical transverse drawing. The paper presents experiment details for the manufacture of the different MCF structures together with mechanical properties and X-ray orientation data. From this, qualitative explanations for the mechanisms to achieve the different structures are given.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rheology and Fluid Dynamics Studies · Polymer Foaming and Composites · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Hallmark B, Mackley MR, Gadala-Maria F (2005) Adv Eng Mater 7(6):545. doi:https://doi.org/10.1002/adem.20040015410.1002/adem.200400154 ↗
2. Briston JH, Katan LL (1974) Plastics films. The Plastics Institute, London
3. Han CD (1976) Rheology in polymer processing. Academic Press Inc., New York
4. Zatloukal M, Vlcek J (2006) J Non-Newt Fluid Mech 133(1):63. doi:https://doi.org/10.1016/j.jnnfm.2005.11.00410.1016/j.jnnfm.2005.11.004 ↗
5. Dees JR, Spruiell JE (1974) J Appl Polym Sci 18(4):1053. doi:https://doi.org/10.1002/app.1974.07018040810.1002/app.1974.070180408 ↗
6. White J, Cakmak M (1986) Adv Polym Technol 6(3):295. doi:https://doi.org/10.1002/adv.1986.06006030710.1002/adv.1986.060060307 ↗
7. Syang-Peng R (2001) J Appl Polym Sci 82(12):2896. doi:https://doi.org/10.1002/app.214510.1002/app.2145 ↗
8. Mills NJ, Zhu HX (1999) J Mech Phys Solids 47(3):669. doi:https://doi.org/10.1016/S0022-5096(98)00007-610.1016/S0022-5096(98)00007-6 ↗
9. Zhu HX, Mills NJ, Knott JF (1997) J Mech Phys Solids 45(11–12):1875. doi:https://doi.org/10.1016/S0022-5096(97)00027-610.1016/S0022-5096(97)00027-6 ↗
10. Hallmark B, Gadala-Maria F, Mackley MR (2005) J Non-Newt Fluid Mech 128(2–3):83. doi:https://doi.org/10.1016/j.jnnfm.2005.03.01310.1016/j.jnnfm.2005.03.013 ↗
11. Hornung CH, Mackley MR, Baxendale IR, Ley SV (2007) Org Process Res Dev 11(3):399. doi:https://doi.org/10.1021/op700015f10.1021/op700015f ↗
12. Hornung CH, Hallmark B, Hesketh RP, Mackley MR (2006) J Micromech Microeng 16(2):434. doi:https://doi.org/10.1088/0960-1317/16/2/03010.1088/0960-1317/16/2/030 ↗
13. Jiang PX, Fan MH, Si GS, Ren ZP (2001) Int J Heat Mass Transfer 44(5):1039. doi:https://doi.org/10.1016/S0017-9310(00)00169-110.1016/S0017-9310(00)00169-1 ↗
14. Ward IM (1983) Mechanical properties of solid polymers. Wiley, Bristol
15. Lamberti G, Titomanlio G, Brucato V (2001) Chem Eng Sci 56(20):5749. doi:https://doi.org/10.1016/S0009-2509(01)00286-X10.1016/S0009-2509(01)00286-X ↗
16. Bashir Z, Keller A (1989) Colloid Polym Sci 267(2):116. doi:https://doi.org/10.1007/BF0141034910.1007/BF01410349 ↗
17. Ward IM (1962) Proc Phys Soc 80:1176. doi:https://doi.org/10.1088/0370-1328/80/5/31910.1088/0370-1328/80/5/319 ↗
18. Vincent PI (1960) Polymer (Guildf) 1:7. doi:https://doi.org/10.1016/0032-3861(60)90003-310.1016/0032-3861(60)90003-3 ↗
19. Robertson RE (1964) General Electric Co. Report No. 64-RL-358OC
20. Zhang XM, Elkoun S, Ajji A, Huneault MA (2004) Polymer (Guildf) 45(1):217. doi:https://doi.org/10.1016/j.polymer.2003.10.05710.1016/j.polymer.2003.10.057 ↗
21. Hallmark B, Medina DI, Mackley MR (2007) In: Proceedings of PPS-23 polymer processing society. Salvador, Brazil
22. Hammersley AP, Svensson SO, Thompson A, Graafsma H, Kvick A, Moy JP (1995) Rev Sci Instrum 66(3):2729. doi:https://doi.org/10.1063/1.114561810.1063/1.1145618 ↗
23. Bunn CW (1939) Trans Faraday Soc 35:482. doi:https://doi.org/10.1039/tf939350048210.1039/TF9393500482 ↗
24. Schrauwen BAG, Von Breemen LCA, Spoelstra AB, Govaert LE, Peters GWM, Meijer HEH (2004) Macromolecules 37(23):8618. doi: 10.1021/ma048884 k10.1021/ma048884k ↗
25. Hermans PH (1946) Contributions to the physics of cellulose fiber. Elsevier, Amsterdam
26. Liang RF, Mackley MR (2001) J Rheol 45(1):211. doi:https://doi.org/10.1122/1.133278610.1122/1.1332786 ↗