Effects of rolling and hot pressing on mechanical properties of boron carbide-based ceramics
Source abstract
Abstract
A study of hot pressed B4C-based laminates, after rolling and without rolling, has been performed to elucidate the existence of fracture resistance/crack length anisotropy induced by this processing technique. While the crack lengths/fracture resistance was affected significantly by the presence of the residual stresses in B4C/B4C-ZrB2 laminates, no differences in Vickers crack lengths were observed in B4C/B4C laminates prepared by rolling and hot pressing, as compared to the crack lengths seen in pure B4C ceramics prepared by hot pressing without rolling. X-ray diffraction analysis confirmed that no texture has been formed during the rolling and hot pressing of B4C
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Boron and Carbon Nanomaterials Research · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Johnson GR, Holmquist TJ (1999) J Appl Phys 85:8060. doi: https://doi.org/10.1063/1.37064310.1063/1.370643 ↗
2. Orphal DL, Franzen RR, Charters AC, Menna TL, Piekutowski AJ (1997) Int J Impact Eng 19:15. doi: https://doi.org/10.1016/S0734-743X(96)00004-810.1016/S0734-743X(96)00004-8 ↗
3. Chen M, Mccauley JW, Hemker KJ (2003) Science 299:1563. doi: https://doi.org/10.1126/science.108081910.1126/science.1080819 ↗
4. Bourne NK (2002) In: Proceedings of the Royal Society of London series A—mathematical, physical and engineering sciences, 458(2024), p 199910.1098/rspa.2002.0968 ↗
5. Vogler TJ, Reinhart WD, Chabildas LC (2004) J Appl Phys 95:4173. doi: https://doi.org/10.1063/1.168690210.1063/1.1686902 ↗
6. Niihara K, Nakahira A, Hirai T (1984) J Am Ceram Soc 67:1310.1111/j.1151-2916.1984.tb19158.x ↗
7. Champagne B, Angers R (1979) J Am Ceram Soc 62:149. doi: https://doi.org/10.1111/j.1151-2916.1979.tb19042.x10.1111/j.1151-2916.1979.tb19042.x ↗
8. Yamada S, Sakaguchi S, Hirao K, Yamauchi Y, Kanzaki S (2003) J Ceram Soc Jpn 111:53. doi: https://doi.org/10.2109/jcersj.111.5310.2109/jcersj.111.53 ↗
9. Thevenot F (1990) J Eur Ceram Soc 6:205. doi: https://doi.org/10.1016/0955-2219(90)90048-K10.1016/0955-2219(90)90048-K ↗
10. Abzianidze TG, Eristavi AM, Shalamberidze SO (2000) J Solid State Chem 154:191. doi: https://doi.org/10.1006/jssc.2000.883410.1006/jssc.2000.8834 ↗
11. Lee H, Speyer R (2002) J Am Ceram Soc 85:129110.1111/j.1151-2916.2002.tb00260.x ↗
12. Orlovskaya N, Lugovy M, Ko F, Yarmolenko S, Sankar J, Kuebler J (2006) Compos B 37:524. doi: https://doi.org/10.1016/j.compositesb.2006.02.02210.1016/j.compositesb.2006.02.022 ↗
13. Orlovskaya N, Lugovy M, Kuebler J, Mechanical performance of 3 layered B4C/B4C-SiC laminates (in preparation)
14. Tariolle S, Reynaud C, Thevenot F, Chartier T, Besso JL (2004) J Solid State Chem 177:487. doi: https://doi.org/10.1016/j.jssc.2003.02.00710.1016/j.jssc.2003.02.007 ↗
15. Mcclellan KJ, Chu F, Roper JM, Shindo I (2001) J Math Sci 36:3403. doi: https://doi.org/10.1023/A:101794762578410.1023/A:1017947625784 ↗
16. Radchenko A, Subbotin V, Lugovy M, Orlovskaya N, Fracture toughness anisotropy of hot pressed silicon nitride (in preparation)
17. Orlovskaya N, Lugovy M, Subbotin V, Radchenko O, Adams J, Cheda M et al (2005) J Math Sci 40:5483. doi: https://doi.org/10.1007/s10853-005-1923-x10.1007/s10853-005-1923-x ↗
18. Kakazey M, Vlasova M, Gonzalez-Rodriguez JG, Dominguez-Patino M, Leder R (2006) Mater Sci Eng A 418:111. doi: https://doi.org/10.1016/j.msea.2005.11.01810.1016/j.msea.2005.11.018 ↗
19. Tabor D (1951) Hardness of metals. Clarendon Press, Oxford
20. Antis GR, Chantikol P, Lawn BR, Marshall DB (1981) J Am Ceram Soc 64:533. doi: https://doi.org/10.1111/j.1151-2916.1981.tb10320.x10.1111/j.1151-2916.1981.tb10320.x ↗
21. European Standard EN 843-1, Advanced technical ceramics—Mechanical properties of monolithic ceramics at room temperature—Part 1: determination of flexural strength, December 2006
22. European Standard EN 843-2, Advanced technical ceramics—Mechanical properties of monolithic ceramics at room temperature—Part 2: determination Young’s modulus, shear strength and Poisson’s ratio, December 2006
23. Anselmi-Tamburini U, Ohyanagi M, Munir ZA (2004) Chem Mater 16:4347. doi: https://doi.org/10.1021/cm049195q10.1021/cm049195q ↗
24. Lemis-Petropoulos P, Kapaklis V, Peikrishvili AB, Politis C (2003) J Mod Phys B 17:2781. doi: https://doi.org/10.1142/S021797920301858210.1142/S0217979203018582 ↗