Fabrication of multilayer dielectrically loaded antennas using aqueous electrophorectic deposition of polyether ether ketone
Source abstract
Abstract
The paper presents proof of concept of a viable multilayer technology to enhance the performance of multifilar helix, receive-only satellite antennas. Approximately, 30-μm layers of polyether ether ketone (PEEK) were deposited onto the Cu filars of a single layer dielectrically loaded multifilar helix antenna using aqueous electrophoretic deposition (EPD). The PEEK coating was densified at ~400–420 °C in flowing N2 to prevent oxidation of the Cu filars. A second Cu metallisation was deposited onto the surface of the PEEK and the resulting antenna characterised. The multilayer antenna revealed a dual band response with peak radiation efficiencies >25 % and ~50 % increase in bandwidth. Multilayered surface architectures fabricated from PEEK using EPD, therefore, show great potential for the development of a broad range of high-performance multiband dielectrically loaded antennas whose peak frequencies may, in principle, be tuned by modifying the thickness of the PEEK layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · Silicone and Siloxane Chemistry · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Leisten OP, Foulkes-Jones G (1995) Performance of a miniature dielectrically loaded volute antenna. In: Institute of Navigation Conference, Palm Springs, 12–15 Sept 1995
2. Mirsaneh M, Zalinska B, Leisten OP, Reaney IM (2008) Circulary polarized dielectric loaded antennas: current technology and future challenges. Adv Funct Mat 18(16):2293–230010.1002/adfm.200701444 ↗
3. Chu LJ (1948) Physical limitations on omni-directional antennas. J Appl Phys 9:1163–1175
4. Rae PJ, Brown EN, Orler EB (2007) The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response. Polymer 48(2):598–61510.1016/j.polymer.2006.11.032 ↗
5. http://www.victrex.com/docs/literature-docs/Victrex_Material Properties guide. Accessed 2014
6. Durney LJ (1996) Electroplating engineering handbook, Ch. 38. Chapman and Hall, London 755
7. Wang C, Ma J, Cheng W (2003) Formation of polyetheretherketone polymer coating by electrophoretic deposition method. Surf Coat Technol 173:27110.1016/S0257-8972(03)00626-1 ↗
8. Corni I, Neumann N, Eifler D, Boccaccini A (2008) Three dimensional reconstruction of a nickel alumina composite coating by FIB SIMS. Adv Eng Mater 10(6):559–56410.1002/adem.200800010 ↗
9. Boccaccini AR, Peters C, Roether JA, Eifler D, Misra SK, Minay EJ (2006) Electrophoretic deposition of polyetheretherketone (PEEK) and PEEK/Bioglass coatings on NiTi shape memory alloy wires. J Mater Sci 41:8152–8159. doi: 10.1007/s10853-006-0556-z10.1007/s10853-006-0556-z ↗
10. Zhang C, Zhang G, Jl V, Liao H, Costil S, Coddet C (2009) Microstructure and mechanical properties of flame sprayed PEEK coating remelted by laser process. Prog Org Coat 66:248–25310.1016/j.porgcoat.2009.08.002 ↗