Effect of degree of saponification on properties of films obtained from PVA/NaCl/H2O system
Source abstract
Abstract
Properties of the film obtained from the solution of atactic-polyvinyl alcohol (PVA)/NaCl/H2O system were investigated through changing the degree of saponification (DS) and NaCl concentration. The films had a higher crystallinity as well as a higher draw ratio than pure PVA film. Maximum values of degree of crystallinity and draw ratio of the films were 38.5% and 17.8, respectively. The highest tensile modulus of the films was at DS 99.05 mol% and NaCl concentration 2 wt.%. These results indicated that the NaCl concentration control has a beneficial effect on properties upgrade of PVA film, but the DS control was effective in control of degree of crystallinity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A. C. PALMISANO and C. A. PETTIGREW, BioScience 42 (1992) 680.10.2307/1312174 ↗
2. G. SWIFT, FEMS Microbiol. Rev. 103 (1992) 339.10.1111/j.1574-6968.1992.tb05856.x ↗
3. C. C. DEMERLIS and D. R. SCHONEKER, Food and Chem. Toxicol. 41 (2003) 319.10.1016/S0278-6915(02)00258-2 ↗
4. R. SOLARO, A. CORTI and E. CHIELLINI, Polym. Adv. Technol. 11 (2000) 873.10.1002/1099-1581(200008/12)11:8/12<873::AID-PAT35>3.0.CO;2-V ↗
5. Y. TOKIWA, G. KAWABATA and A. JARERAT, Biotechnol. Lett. 23 (2001) 1937.10.1023/A:1013785817554 ↗
6. I. SAKURADA, T. ITOH and K. NAKAMAE, J. Polymer Sci. C. 15 (1966) 75.10.1002/polc.5070150107 ↗
7. P. J. BARHAM and A. KELLER, J. Mater. Sci. 20 (1985) 2281.10.1007/BF00556059 ↗
8. PO-DA HONG and K. MIYASAKA, Polymer 35 (1994) 1369.10.1016/0032-3861(94)90335-2 ↗
9. H. FUJIWARA, M. SHIBAYAMA, J. H. CHEN and S. NOMURA, J. Appl. Polym. Sci. 37 (1989) 1403.10.1002/app.1989.070370522 ↗
10. T. KANAMOTO, S. KIYOOKA, Y. TOVMASYAN, H. SANO and H. NARUKAWA, Polymer 31 (1990) 2039.10.1016/0032-3861(90)90073-8 ↗
11. PO-DA HONG and K. MIYASAKA, ibid. 32 (1991) 3140.10.1016/0032-3861(91)90134-5 ↗
12. W. I. CHA, S. H. HYON and Y. IKADA, J. Polymer Sci. Polym. Phys. Ed. 32 (1991) 297.10.1002/polb.1994.090320211 ↗
13. K. AGAWA, Q. WAN, T. TANIGAMI, S. MATSUZAWA and K. YAMAURA, J. Appl. Polym. Sci. 80 (2001) 467.10.1002/1097-4628(20010418)80:3<467::AID-APP1120>3.0.CO;2-E ↗
14. W. S. LYOO, J. H. KIM, K. KOO, J. S. LEE, S. S. KIM, W. S. YOON, B. C. JI, I. C. KWON and C. J. LEE, J. Polymer Sci., Polym. Phys. 39 (2001) 1263.10.1002/polb.1100 ↗
15. Y. BIN, Y. TANABE, C. NAKABAYASHI, H. KUROSU and M. MATSUO, Polymer 42 (2001) 1183.10.1016/S0032-3861(00)00423-7 ↗
16. M. MATSUO, Y. BIN and M. NAKANO, ibid. 42 (2001) 4687.10.1016/S0032-3861(00)00847-8 ↗
17. M. SUZUKI, T. TANIGAMI, S. MATSUZAWA and K. YAMAURA, J. Appl. Polym. Sci. 86 (2002) 1970.10.1002/app.11118 ↗
18. K. YAMAURA, M. FUKUDA, T. TANAKA and T. TANIGAMI, J. Appl. Polym. Sci. 74 (1999) 1298.10.1002/(SICI)1097-4628(19991031)74:5<1298::AID-APP28>3.0.CO;2-7 ↗
19. T. TANAKA, T. LU, S. YUASA and K. YAMAURA, Polym. Int. 50 (2001) 1103.10.1002/pi.752 ↗
20. L.-X. DAI, K. UKAI, S. M. SHAHEEN and K. YAMAURA, ibib. 51 (2002) 715.
21. K. YAMAURA and M. NAITOH, J. Mater. Sci. 37 (2002) 705.10.1023/A:1013875427788 ↗
22. K. YAMAURA, T. KATOH, K. KOEZUKA, M. IWASEYA and L.-X. DAI, ibid 39 (2004) 1609.10.1023/B:JMSC.0000016159.67758.c8 ↗
23. B. BRISCOE, P. LUCKHAM and S. ZHU, Polymer 41 (2000) 3851.10.1016/S0032-3861(99)00550-9 ↗
24. L.-X. DAI, S. YU, Polym. Adv. Technol. 14 (2003) 449.10.1002/pat.351 ↗
25. C. A. FINCH, ed., in “Polyvinyl Alcohol, Developments” (Wiley, Chichester 1992).
26. K. TOYOSHIMA, Chemical Property of Poval. in “Poval” (Kobunshikankokai, Kyoto 1970), p. 142.