Critical length measurements in carbon fibers during single fiber fragmentation tests using acoustic emission
Source abstract
Abstract
The single fibre fragmentation test (SFFT) is a well-known experimental test, which allows the study of fibre failure in its simplest form [1-2]. The principle is that a single fibre embedded in a matrix repeatedly breaks until all fragment lengths are within a critical distance. Once the fibre has broken for the first time, successive breakage happens in regions removed from the initial failure, often referred to as polled areas [3]. Acoustic emission (AE) has been extensively used for the detection and localisation of fibre breakage during SFFT tests, in carbon [4-5], Kevlar [6-7] and glass fibre composites [8-9]. In all cases, in spite of the small diameter of the fibres, nearly all fibre breakages appeared to have been detected and associated with a single acoustic emission event, an occurrence that has been defined as oneto-one correspondence [10]. Moreover, the number of acoustic emission events detected corresponded with considerable accuracy with the fibre breakages observed by other methods e.g., optical microscopy [11]. This allowed the determination of Weibull statistical strength parameters for the fibres based on the number of acoustic emission hits detected [12]. From the above parameters and the average length of fibre fragment, the interfacial strength can be determined, assuming that the fibres are constant in diameter, which is acceptable for glass and carbon fibres, much less so for brittle e.g., ceramic, monofilaments [13]. When dealing with localisation of acoustic emission events, a considerable number of issues arise. Ideally, in an environment with sufficient signal to noise ratio, two sensors can be
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. W. A. Curtin Appl. Phys. Lett. 58 (1991) 1155.10.1063/1.104349 ↗
2. P. Feillard, G. DÉsarmot and J. P. Favre Comp. Sci. Technol. 50 (1994) 265.10.1016/0266-3538(94)90148-1 ↗
3. M. C. Westbury and L. T. Drzal J. Comp. Technol. Res. 13 (1991) 22.10.1520/CTR10070J ↗
4. M. Desaeger, M. Wevers and I. Verpoest, AECM 4 Conference, Seattle, July 1991.
5. D. Rouby and J. P. Favre, 16th Annual Meeting EWGAE, London, Sept. 1986.
6. B. T. Ma, L. S. Schadler, C. Laird and J. C. Figueroa Polym. Comp. 11 (1990) 211.10.1002/pc.750110403 ↗
7. A. N. Netravali and W. Sachse ibid. 12 (1991) 370.10.1002/pc.750120510 ↗
8. I. Narisawa and H. Oba J. Mater. Sci. 19 (1984) 1777.10.1007/BF00550247 ↗
9. J. M. Park and R. V. Subramanian J. Adhes. Sci. Technol. 8 (1994) 133.10.1163/156856194X00113 ↗
10. Q. Q. Ni and E. Jinen Eng. Fract. Mech. 56 (1997) 779.10.1016/S0013-7944(97)00001-5 ↗
11. R. B. Clough and W. G. Mcdonough Comp. Sci. Technol. 56 (1996) 1119.10.1016/S0266-3538(96)00076-0 ↗
12. J. Andersons and V. Tamusz ibid. 48 (1993) 57.10.1016/0266-3538(93)90120-6 ↗
13. T. Morimoto Comp. Part A-Appl. S. 34 (2003) 597.10.1016/S1359-835X(03)00102-7 ↗
14. A. N. Netravali, L. T. Topoleski, W. H. Sachse and S. L. Phoenix Comp. Sci. Technol. 35 (1989) 13.10.1016/0266-3538(89)90068-7 ↗
15. A. Kelly and W. R. Tyson J. Mech. Phys. Solids 13 (1965) 329.10.1016/0022-5096(65)90035-9 ↗
16. S. A. Hayes Comp. Part A-Appl. S. 32 (2001) 379.10.1016/S1359-835X(00)00127-5 ↗
17. X. J. Gong, J. A. Arthur and L. S. Penn Polym. Comp. 22 (2001) 349.10.1002/pc.10543 ↗
18. R. G. C. Arridge Mater. Sci. Technol. 3 (1987) 609.10.1179/mst.1987.3.8.609 ↗
19. R. Gulino and S. L. Phoenix J. Mater. Sci. 26 (1991) 3107.10.1007/BF01124848 ↗
20. A. S. Wimolkiatisak and J. P. Bell Polym. Comp. 11 (1990) 274.10.1002/pc.750110504 ↗
21. A. N. Netravali, Z. F. Li, W. Sachse and H. F. Wu J. Mater. Sci. 26 (1991) 6631.10.1007/BF02402656 ↗
22. A. Manor and R. B. Clough Comp. Sci. Technol. 45 (1992) 73.10.1016/0266-3538(92)90124-L ↗