Effect of copper additions in directly quenched titanium–boron steels
Source abstract
Abstract
The present study concerns the effect of copper additions on the microstructural evolution and mechanical properties of directly quenched Ti–B steels. Ti and B are added as microalloying elements with an aim of achieving adequate austenite hardenability and Cu is added to retard the austenite (γ) → ferrite (α) transformation. Therefore, the microalloying and Cu additions together allow the transformation of austenite to occur at a lower temperature, resulting in a finer microstructure containing martensitic constituents. The direct-quenching route is adopted with an aim of facilitating the nucleation of the constituent phases from the deformed austenite. In order to circumvent the hot-shortness due to the Cu addition, 0.79 wt% Ni has been added to one of the 1.5 wt% Cu microalloyed steels. The present study has demonstrated that the Ni-containing 1.5Cu–Ti–B steel is capable of providing an attractive combination of strength and ductility comparable to the high strength varieties of HSLA steels in directly quenched condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Shen XP, Priestner R (1990) Metall Trans A 21A:254710.1007/BF02647000 ↗
2. Tanaka T (1981) Int Met Rev 26(4):185
3. Sangal S, Yannacopoulos S (1992) Can Metall Q 31:5510.1179/cmq.1992.31.1.55 ↗
4. Abe T, Kurihara M, Tagawa H, Tsukada K (1987) Trans Iron Steel Inst Jpn 27:47810.2355/isijinternational1966.27.478 ↗
5. Yoo JY, Choo WY, Park TW, Kim YW (1995) ISIJ Int 35(8):103410.2355/isijinternational.35.1034 ↗
6. Hwang GC, Lee S, Yoo JY, Choo WY (1998) Mater Sci Eng A A252:25610.1016/S0921-5093(98)00670-4 ↗
7. Prohaszka J, Dobranszky J (1991) J Heat Treating 9:6310.1007/BF02833248 ↗
8. Bainite Research Committee (1992) Atlas for bainitic microstructures, Vol. 1. ISIJ, Tokyo, p 97
9. Wilson EA (1994) ISIJ Int 34(8):61510.2355/isijinternational.34.615 ↗
10. Krauss G, Thompson SW (1995) ISIJ Int 35(8):93710.2355/isijinternational.35.937 ↗
11. Shibata K, Asakura K (1995) ISIJ Int 35(8):98210.2355/isijinternational.35.982 ↗
12. Vander Voort GF (1984) Metallography—Principles and practice. McGraw-Hill Book Company, New York, p 63210.31399/asm.tb.mpp.9781627082600 ↗
13. Tian D, Karjalainen L, Qian B, Chen DX (1996) Scand J Metall 25:87
14. Garcia CI, Mujahid M, Deardo AJ (1995) In: Proc. Int. Symp. on high performance steels for structural applications. Cleveland, Ohio, p 135
15. Ghosh SK (2006) Some studies on the copper added titanium–boron microalloyed steels. Ph.D. Thesis. Bengal Engg. & Sci. Univ., Howrah, India, p 71