journal article·2005-01

Curing and pyrolysis of polysiloxane/divinylbenzene and its derived carbon fiber reinforced Si?O?C composites

Q. S. Ma, Z. H. Chen, W. W. Zheng, H. F. Hu

Journal of Materials Science· Volume 40· Issue 2
Publisher page

Abstract

The curing and pyrolysis of hydrogen-containing polysiloxane (PSO) and divinylbenzene (DVB) were investigated in this paper. It was found that H2PtCl6 was an effective catalyst for the curing of DVB/PSO. The mass ratio of DVB/PSO had great effect on ceramic yield. The cured DVB/PSO with a mass ratio of 0.5:1 had the highest ceramic yield (76%) at temperature up to 1000°C, and its pyrolysates consisted of 38.3 wt% silicon, 27.4 wt% oxygen, and 34.3 wt% carbon of which 26.3 wt% was free carbon. The composition and structure of pyrolysates of DVB/PSO were changed with increasing pyrolysis temperature. The pyrolysis behavior of DVB/PSO was characterized by thermal analysis. DVB/PSO-derived Si–O–C composites reinforced with carbon fiber cloth (Cf/Si–O–C) were fabricated. The results showed that the flexural strength of Cf/Si–O–C composites could be increased from 118.00 ± 5.00 MPa to 139.78 ± 7.68 MPa if the pyrolysis temperature was elevated from 1000 to 1400°C, which was ascribed to the weakened interfacial bonding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Transition Metal Oxide Nanomaterials · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Y. HASEGAWA, M. IIMURA and S. YAJIMA, J. Mater. Sci. 15 (1980) 720.10.1007/BF00551739 ↗
2. S. RANGARAJAN, R. BELARDINELLI and P. B. ASWATH, ibid. 34(3) (1999) 515.10.1023/A:1004590527954 ↗
3. G. M. RENLUND, S. PROCHAZKA and R. H. DOREMUS, J. Mater. Res. 6(12) (1991) 2723.10.1557/JMR.1991.2723 ↗
4. M. R. MUCALO, N. B. MILESTONE and I. W. M. BROWN, J. Mater. Sci. 32(9) (1997) 2433.10.1023/A:1018517526441 ↗
5. J. ANNAMALAI, W. N. GILL and A. TOBIN, Ceram. Eng. Sci. Proc. 16(4) (1995) 225.10.1002/9780470314715.ch24 ↗
6. R. Y. LEUNG and W. D. PORTER, ibid. 17(4) (1996) 386.10.1002/9780470314876.ch41 ↗
7. P. H. MUTIN, J. Amer. Ceram. Soc. 85(5) (2002) 1185.10.1111/j.1151-2916.2002.tb00243.x ↗
8. V. BELOT, R. J. P. CORRIU, D. LECLERCQ, P. H. MUTIN and A. VIOUX, J. Polym. Sci. A 30(4) (1992) 613.10.1002/pola.1992.080300413 ↗
9. G. D. SORARÙ, L. PEDERIVA, J. LATOURNERIE and R. RAJ, J. Amer. Ceram. Soc. 85(9) (2002) 2181.10.1111/j.1151-2916.2002.tb00432.x ↗
10. I. W. BOYD and J. I. B. WILSON, J. Appl. Phys. 53(6) (1982) 4166.10.1063/1.331239 ↗
11. G. LUCOVSKY, R. J. MEMANINSCH and J. C. KNIGHT, Phys. Rev. B 19 (1979) 2064.10.1103/PhysRevB.19.2064 ↗
12. J. R. FOX, D. A. WHITE, S. M. OLEOFF, R. D. BOYER and P. A. BUDINGER, Mater. Res. Soc. Symp. Proc. 73 (1986) 395.10.1557/PROC-73-395 ↗
13. K. NAKANO, A. KAMIYA, Y. NISHINO, T. IMURA and T. W. CHOU, J. Amer. Ceram. Soc. 78(10) (1995) 2811.10.1111/j.1151-2916.1995.tb08058.x ↗
14. C. C. LU, M. H. HEADINGER, A. P. MAJIDI and T. W. CHOU, J. Mater. Sci. 35(24) (2000) 6301.10.1023/A:1026738923973 ↗