Wet fiber shear flexibility and its contribution to the overall transverse deformation of fibers
Source abstract
Abstract
A new method has been developed for measuring not only bending but also shear flexibility of pulp fibers by using confocal laser scanning microscopy. Based on the Steadman and Luner method, a two-stage wet pressing process was used which enabled both bending and shear flexibility and both bending and shear modulii of fibers to be determined with a single test. Three types of fibers, i.e., bleached spruce Kraft Pulp (BKP), aspen bleached chemi-themomechanical pulp (BCTMP), and aspen themomechanical pulp (CTMP), were tested. Results show that the longitudinal elastic modulii of the fibers are in a range of 3–37 GPa, and the transverse shear modulii of them are in a range of 27–103 MPa. It was also found that the shear contribution to the overall fiber deformation ranged from 60% to 90% for the fibers measured. This substantiates the concept of shear contribution to measured fiber flexibility as proposed by Waterhouse and Page.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Material Properties and Processing · Advanced Cellulose Research Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Forgracs OL, Robertson AA, Mason SG (1957) In: 1st fundamental research symposium, Cambridge, p 447
2. Samuelsson LG (1963) Sven Papperstidn 15(1):S41
3. Kuhn DCS, Lu X, Olson JA, Robertson AG (1995) J Pulp Pap Sci 21(1):337
4. Tam Doo PA, Kerekes RJ (1981) Tappi J 64:113
5. Steadman R, Luner P (1981) 8th fundamental research symposium, p 211
6. Waterhouse JF, Page DH (2004) Nord Pulp Pap Res J 19:89. doi:https://doi.org/10.3183/NPPRJ-2004-19-01-p089-09210.3183/npprj-2004-19-01-p089-092 ↗
7. Mohlin UB (1975) Sven Papperstidn 78(11):412
8. Ruhlemann F (1926) Pap Trade J 82(13):T168
9. Jayne BA (1959) Tappi J 42:461
10. Leopold B (1966) Tappi J 49:315
11. Page DH, El-Hosseiny F, Winkler K (1971) Nature 229:252. doi:https://doi.org/10.1038/229252a010.1038/229252a0 ↗
12. Ehrnrooth EML, Kolseth P (1984) Wood Fiber Sci 16(4):549
13. Page DH, El-Hossiny F, Winkler K, Lancaster APS (1970) Tappi J 60(4):114
14. Mark RE (2002) Handbook of physical testing of paper II, 2nd edn. Marcel Dekker Inc., New York
15. Mark RE (1967) Cell wall mechanics of tracheids, Yale University
16. Mcmillin CW (1974) Sven Papperstidn 77(9):319
17. Kolseth P, De R (1978) In: General constitutive relations for wood and wood-based materials, Syracuse University, pp 57–59
18. Nato T, Usuda M, Kadoya T (1983) Proc 1983 Int. Paper Physics Conf. Atlanta, TAPPI Press, Atlanta, pp 197–201
19. Faure JP, Lariviere JP, Bacon C, Pouyet J (1997) Exp Mech 37:344. doi:https://doi.org/10.1007/BF0231742910.1007/BF02317429 ↗
20. Naito T, Usuda M, Kadoya T (1980) Tappi J 63:115
21. Hartler N, Nyren J (1970) Tappi J 73(5):820
22. Scallan AM, Tigerström AC (1992) J Pulp Pap Sci 18(5):J188
23. Dunford JA, Wild PM (2002) J Pulp Pap Sci 28:136
24. Chhabra N, Spelt JK, Yip CM, Kortschot MT (2005) J Pulp Pap Sci 31:52
25. Scallan AM, Tigerstrom AC (1992) J Pulp Pap Sci 18:188
26. Yan D, Li K (2007) J Mater Sci. doi:https://doi.org/10.1007/s10853-007-2085-910.1007/s10853-007-2085-9 ↗
27. Yan D, Li K, Zhou Y (2008) Tappi J 91:2510.32964/TJ7.1.25 ↗
28. Ebeling K (1976) In: Bolam F (ed) Technical division. BPBIF, London, pp 304–335
29. Nesbakk T, Helle T (2002) Proceeding of 88th annual meeting of pulp and paper technical association of Canada, p 113
30. Gao Y, Li K, Wang Z (2007) Pulp Pap Can 108(1):44
31. Gere JM, Timoshenko SP (1990) Mechanics of materials, PWS-KENT, USA10.1007/978-1-4899-3124-5 ↗
32. Abramoff MD, Magelhaes PJ, Ram SJ (2004) Biophotonics Int 11(7):36
33. Harlick RM, Linda GS (1992) Computer and robot vision. Addison-Wesley
34. Li K, Tan X, Yan D (2006) Surf Interface Anal 38(1):1328. doi:https://doi.org/10.1002/sia.245410.1002/sia.2454 ↗
35. Cousins WJ (1976) Wood Fiber Sci 10:9
36. Nyren J (1971) Pulp Pap Can 72(10):T321
37. Wild P, Omholt I, Steinke D, Schuetze A (2005) J Pulp Pap Sci 31:116
38. Lowe R, Ragauskas A, Page DH (2005) In: I’Anson SJ (ed) Advances in paper science and technology, Proc 13th fundamental research symposium, FRC Manchester, p 921
39. Da Silva EC (1983) In: Tappi proceedings 1983 International paper physics conference, p 13
40. Lossada AA (1998) Paperi ja Puu 80:257
41. Paavilainen L (1993) Paperi ja Puu 75(9):689
42. Lawryshyn YA, Kuhn DCS (1996) J Pulp Pap Sci 22(1):423