journal article·2016-01

Calculation and fabrication of two-dimensional complete photonic bandgap structures composed of rutile TiO2 single crystals in air/liquid

Sachiko Matsushita, Akihiro Matsutani, Yasushi Morii, Daito Kobayashi, Kunio Nishioka, Dai Shoji, Mina Sato, Tetsu Tatsuma, Takumi Sannomiya, Toshihiro Isobe, Akira Nakajima

Journal of Materials Science· Volume 51· Issue 2
Publisher page

Abstract

Photoelectrochemical applications of photonic crystals are gathering great interests both from physicists and chemists. Here, we theoretically and experimentally present two-dimensional photonic bandgap (2D-PBG) structures based on rutile titanium dioxide (TiO2) single crystal that is a famous material because of the photoelectrochemical ability. The structures were the arrays of hollow hexagonal rutile TiO2 pillars in contact with air or a typical nonaqueous electrolyte solution, acetonitrile. Since the TiO2 refractive indices exhibit a strong dispersive behavior, the bandgap width was discussed from the viewpoint of the refractive index map that would be helpful for the real application of this structure. The 2D-PBG structures for both infrared light and visible light were fabricated by our established lithography technique for rutile TiO2 with and without Nb doping, i.e., photocatalytic TiO2 and high electron conductive TiO2, respectively. These structures show characteristic absorbance peaks or reflectance dips at wavelengths predicted by our theoretical calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photonic Crystals and Applications · Optical Coatings and Gratings · Photonic and Optical Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Sakoda K (2001) Optical properties of photonic crystals. Springer, New York10.1007/978-3-662-14324-7 ↗
2. Joannopoulos JD, Johnson SG, Winn JN, Meade RD (2008) Photonic crystals: molding the flow of light. Princeton University Press, New Jersey
3. Busch K, Lölkes S, Wehrspohn RB, Föhl H (2004) Photonic crystal. Wiley, Weinheim10.1002/3527602593 ↗
4. Arpin KA, Mihi A, Johnson HT et al (2010) Multidimensional architectures for functional optical devices. Adv Mater 22:1084–110110.1002/adma.200904096 ↗
5. Akahane Y, Asano T, Song B-S, Noda S (2003) High-Q photonic nanocavity in a two-dimensional photonic crystal. Nature 425:944−94710.1038/nature02063 ↗
6. Ryu H-Y, Kwon S-H, Lee Y-J, Lee Y-H, Kim J-S (2002) Very-low-threshold photonic band-edge lasers from free-standing triangular photonic crystal slabs. Appl Phys Lett 80:3476–347810.1063/1.1477617 ↗
7. Fang M, Volotinen TT, Kulkarni SK, Belova L, Rao KV (2010) Effect of embedding Fe3O4 nanoparticles in silica spheres on the optical transmission properties of three-dimensional magnetic photonic crystals. J Appl Phys 108:10350110.1063/1.3509146 ↗
8. Wierer JJ, David A, Megens MM (2009) III-nitride photonic-crystal light-emitting diodes with high extraction efficiency. Nat Photonics 3:163–16910.1038/nphoton.2009.21 ↗
9. Mekis A, Chen JC, Kurland I, Fan S, Villeneuve PR, Joannopoulos JD (1996) High Transmission through sharp bends in photonic crystal waveguides. Phys Rev Lett 77:378710.1103/PhysRevLett.77.3787 ↗
10. Miyai E, Noda S (2004) Structural dependence of coupling between a two-dimensional photonic crystal waveguide and a wire waveguide. J Opt Soc Am B 21:67–7210.1364/JOSAB.21.000067 ↗
11. Cregan RF, Mangan BJ, Knight JC et al (1999) Single-mode photonic band gap guidance of light in air. Science 285:1537–153910.1126/science.285.5433.1537 ↗
12. Chen JSY, Euser TG, Farrer NJ, Sadler PJ, Scharrer M, Russell PSJ (2010) Photochemistry in photonic crystal fiber nanoreactors. Chem Eur J 16:5607–561210.1002/chem.201000496 ↗
13. Chen JIL, Loso E, Ebrahim N, Ozin GA (2008) Synergy of slow photon and chemically amplified photochemistry in platinum nanocluster-loaded inverse titania opals. J Am Chem Soc 130:5420–542110.1021/ja800288f ↗
14. Matsushita SI, Fukuda N, Shimomura M (2005) Photochemically functional photonic crystals prepared by using a two-dimensional particle-array template. Colloid Surf A 257–258:15–1710.1016/j.colsurfa.2004.10.032 ↗
15. Wang P, Zakeeruddin SM, Humphry-Baker R, Moser JE, Grätzel M (2003) Molecular-scale interface engineering of TiO2 nanocrystals: improve the efficiency and stability of dye-sensitized solar cells. Adv Mater 15:2101–210410.1002/adma.200306084 ↗
16. Zhang D, Yoshida T, Minoura H (2003) Low-temperature fabrication of efficient porous titania photoelectrodes by hydrothermal crystallization at the solid/gas interface. Adv Mater 15:814–81710.1002/adma.200304561 ↗
17. Kamat PV (1993) Photochemistry on nonreactive and reactive (semiconductor) surfaces. Chem Rev 93:267–30010.1021/cr00017a013 ↗
18. Nishimura S, Abrams N, Lewis BA et al (2003) Standing wave enhancement of red absorbance and photocurrent in dye-sensitized titanium dioxide photoelectrodes coupled to photonic crystals. J Am Chem Soc 125:6306–631010.1021/ja034650p ↗
19. Dorado LA, Depine RA, Schinca D, Lozano G, Míguez H (2008) Experimental and theoretical analysis of the intensity of beams diffracted by three-dimensional photonic crystals. Phys Rev B 78:07510210.1103/PhysRevB.78.075102 ↗
20. Tao C-A, Zhu W, An Q, Li G (2010) Theoretical demonstration of efficiency enhancement of dye-sensitized solar cells with double-inverse opal as mirrors. J Phys Chem C 114:10641–1064710.1021/jp1022604 ↗
21. Guo M, Xie K, Lin J et al (2012) Design and coupling of multifunctional TiO2 nanotube photonic crystal to nanocrystalline titania layer as semi-transparent photoanode for dye-sensitized solar cell. Energy Environ Sci 5:9881–988810.1039/c2ee22854h ↗
22. Yip CT, Huang H, Zhou L et al (2011) Direct and seamless coupling of TiO2 nanotube photonic crystal to dye-sensitized solar cell: a single-step approach. Adv Mater 23:5624–562810.1002/adma.201103591 ↗
23. Kim S-H, Lee SY, Yang S-M, Yi G-R (2011) Self-assembled colloidal structures for photonics. NPG Asia Mater. 3:25–3310.1038/asiamat.2010.192 ↗
24. Matsushita S, Miwa T, Fujishima A (1997) Preparation of a new nanostructured TiO2 surface using a two-dimensional array-based template. Chem Lett 9:925–92610.1246/cl.1997.925 ↗
25. Matsushita SI, Miwa T, Tryk DA, Fujishima A (1998) New mesostructured porous TiO2 surface prepared using a two-dimensional array-based template of silica particles. Langmuir 14:6441–644710.1021/la981106z ↗
26. Frölich A, Fischer J, Zebrowski T, Busch K, Wegener M (2013) Titania woodpiles with complete three-dimensional photonic bandgaps in the visible. Adv Mater 25:3588–359210.1002/adma.201300896 ↗
27. Matsushita S, Hayashi M, Isobe T, Nakajima A (2012) Simulation design for rutile-TiO2 nanostructures with a large complete-photonic bandgap in electrolytes. Crystals 2:1483–149110.3390/cryst2041483 ↗
28. Matsushita S, Suavet O, Hashiba H (2010) Full-photonic-bandgap structures for prospective dye-sensitized solar cells. Electrochim Acta 55:2398–240310.1016/j.electacta.2009.11.105 ↗
29. Matsushita S, Fujiwara R, Shimomura M (2008) Calculation of photonic energy bands of self-assembled-type TiO2 photonic crystals as dye-sensitized solar battery. Colloid Surf A 313–314:617–62010.1016/j.colsurfa.2007.04.168 ↗
30. Rams J, Tejeda A, Cabrera JM (1997) Refractive indices of rutile as a function of temperature and wavelength. J Appl Phys 82:994–99710.1063/1.365938 ↗
31. Akihiro M, Kunio N, Mina S et al (2014) Angled etching of (001) rutile Nb–TiO2 substrate using SF6-based capacitively coupled plasma reactive ion etching. Jpn J Appl Phys 53:06JF0210.7567/JJAP.53.06JF02 ↗
32. Matsutani A, Hayashi M, Morii Y et al (2012) SF6-based deep reactive ion etching of (001) rutile TiO2 substrate for photonic crystal structure with wide complete photonic band gap. Jpn J Appl Phys 51:09800210.1143/JJAP.51.098002 ↗
33. Junesch J, Sannomiya T (2014) Ultrathin suspended nanopores with surface plasmon resonance fabricated by combined colloidal lithography and film transfer. ACS Appl Mater Interfaces 6:6322–633110.1021/am405443y ↗
34. Cronemeyer DC (1952) Electrical and optical properties of rutile single crystals. Phys Rev 87:87610.1103/PhysRev.87.876 ↗
35. Han K, Kim JH (2011) Reflectance modulation of transparent multilayer thin films for energy efficient window applications. Mater Lett 65:2466–246910.1016/j.matlet.2011.05.006 ↗
36. Pereira ALJ, Filho PNL, Acuna J et al (2012) Enhancement of optical absorption by modulation of the oxygen flow of TiO2 films deposited by reactive sputtering. J Appl Phys 111:11351310.1063/1.4724334 ↗
37. Momma K, Izumi F (2011) VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. J Appl Crystallogr 44:1272–127610.1107/S0021889811038970 ↗
38. Kay A, Humphry-Baker R, Graetzel M (1994) Artificial photosynthesis. 2. Investigations on the mechanism of photosensitization of nanocrystalline TiO2 solar cells by chlorophyll derivatives. J Phys Chem 98:95210.1021/j100054a035 ↗
39. Kato G, Nishiyama C, Yabuta T et al (2014) Pore size dependence of self-assembled type photonic crystal on dye-sensitized solar cells efficiency utilising Chlorine e6. J Porous Mater 21:165–17610.1007/s10934-013-9761-8 ↗