journal article·2003-06

Effect of plasma ion implantation on the hydrogen embrittlement of Cu strengthened HSLA-100 steel

A. Kumar, S. Tarafder, S. Mukherjee, S. K. Das, B. Ravikumar, I. Chattoraj

Journal of Materials Science· Volume 38· Issue 12
Publisher page

Abstract

The effect of low dosage plasma ion implantation on hydrogen embrittlement was studied for an HSLA steel using notched tensile samples. The plasma treatment caused an enhancement in the linear strain to failure under embrittling conditions. This was however not reflected in the fracture surfaces of the treated samples which had similar fractographic features as those of untreated samples. The plasma treatment delayed the process of embrittlement without causing any alteration in the basic mechanism of embrittlement. This was due to introduction of residual compressive stresses as well as reduction in the hydrogen permeation flux. Implantation in pure nitrogen seemed most beneficial while implantation in pure argon caused very little improvement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. F. J. Worzala, J. R. Conrad, R. A. Dodd, M. B. Madapura and K. Sridharan, in Proceedings of the 7th International Conference on Ion & Plasma Assisted Techniques ([IPAT 89], Geneva, Switzerland, 1989), p. 139.
2. K. Sridharan, J. R. Conrad, R. A. Dodd and F. J. Worzala, Scripta Metall. Mater. 26 (1992) 1037.10.1016/0956-716X(92)90226-5 ↗
3. W. Ensinger, Surface & Coatings Tech. 84 (1996) 434.10.1016/S0257-8972(95)02763-7 ↗
4. P. Bruzzoni, S. P. Bruhl, J. A. Gomez, L. Nosei, M. Ortiz and J. N. Feugeas, ibid. 110 (1998) 13.10.1016/S0257-8972(98)00540-4 ↗
5. A. M. Brass, J. Chene and A. Boutryfourveille, Corros. Sci. 39 (1997) 1469.10.1016/S0010-938X(97)00054-1 ↗
6. A. H. Bott, S. P. Bruhl, B. Gomez, M. A. Zampronio, P. E. V. Miranda and J. N. Feugeas, J. Phys. D., Appl. Phys. 31 (1998) 3469.10.1088/0022-3727/31/24/010 ↗
7. T. Zakroczymski, N. Lukomski and J. Flis, Metall. Foundry Engr. 23 (1997) 147.
8. M. A. Zampronio, O. Bartier, J. Lesage and P. E. V. Miranda, Mater. Manuf. Process 10 (1995) 315.10.1080/10426919508935024 ↗
9. T. Zakroczymski, N. Lukomski and J. Flis, Corros. Sci. 37 (1995) 811.10.1016/0010-938X(95)80011-5 ↗
10. S. Mukherjee and P. I. John, Surf. & Coatings Tech. 93 (1997) 188.10.1016/S0257-8972(97)00042-X ↗
11. Idem., ibid. 98 (1998) 1437.
12. S. Mukherjee, J. Chakraborty, S. Gupta, P. M. Raole, P. I. John, K. R. M. Rao and I. Manna, ibid. 156 (2002) 103.10.1016/S0257-8972(02)00072-5 ↗
13. M. Devanathan and Z. Stachurski, Proc. Royal Soc. A270 (1962) 90.